Content | High-Performance 2.4 GHz Digital Wireless System with 2 Handheld Microphones and Dual-Mode USB Receiver
-
- Package of 2 ULM200M handheld microphones and ULM200D dual-mode USB receiver
- High-quality microphone capsule for dedicated vocal applications
- Ultra-compact USB receiver with dual mode analog/digital audio interface
- Digital 2.4 GHz wireless connectivity offers superior sound quality
- Maximum range 120 m
- Automatic pairing for easy and intuitive setup
- Integrated volume up and down buttons on handheld microphone
- Panic mute feature on microphone
- Receiver powered via USB interface
- Auto-sensing of analog or USB digital audio connection
- 2.4 GHz ISM band operation allows license-free use on a worldwide basis
- 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
| The NT-USB Mini is a compact, studio-quality USB microphone designed for recording direct to a computer or tablet.
It is simple to set-up and use, and a smooth frequency response and directional pickup pattern make the NT-USB Mini perfect for recording vocals and instruments, livestreaming and gaming, podcasting, voice calls and more.
The included desk stand features a magnetic base that can be detached for easy mounting on mic stands or studio arms, and with its in-built pop filter and zero-latency headphone monitoring, the NT-USB Mini delivers crisp, clear audio in all recording applications.
Acoustic Principle: Pressure gradient Active Electronics: Electret condenser, A/D and USB interface Polar Pattern: Cardioid
Frequency Range: 20 Hz – 20 kHz
Input SPL @ 1%THD: 121dB (A-weighted, as per IEC651) Sample Rate: 48 kHz
Bus Powered: Yes
Bit Depth: 24-bit Analog Output: 3.5mm headphone
Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
Output Connection: USB-C OS Requirements: macOS 10.12 / Windows 10
Weight (grams): 585
Dimensions (millimetres): Height: 141.9 Width: 54.5 Diameter (base): 89.3
• Studio-quality microphone with U SB-C connectivity
• 3.5mm headphone output with zero-latency monitoring
• Easy set-up, plug in and play
• Detachable magnetic desk stand
• In-built pop ? lte
Polar Chart: |
Cardioid |
USB compatibility: |
Yes |
|
- Element: Back electret condenser
- Element diameter: 14mm
- Frequency response: 20–17,000Hz
- Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
- Output: USB
- A-D converter: 48kHz / 16-bit sampling rate
- Output impedance: 100Ω ± 30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max. SPL: 132dB (at 1kHz <1% THD)
- Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
Polar Pattern |
Supercardioid |
Frequency Response |
50 Hz - 16 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms (290 Ohms Actual) |
Output Connectors |
XLR-3 Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
9.92 oz. (278 g) |
|
Combining high-resolution audio with increased connectivity options, the AT2020USBi cardioid condenser microphone adds a new level of sound-quality and convenience to the expanding lineup of Audio-Technica USB microphones. Modeled after the critically acclaimed AT2020, this digital output mic features an A/D converter with a 24-bit/96 kHz sampling rate to deliver high-resolution articulation and intelligibility thatʼs perfect for home studio recording, field recording, podcasting and voiceover use.
The AT2020USBi works with both USB and Lightning cables (included), so you can use it straight from the box to digitally capture audio on the device of your choice: PC, Mac or lightning equipped iOS device. The integrated gain control adds to the convenience, allowing you to adjust the input level directly on the microphone.
The AT2020USBi cardioid condenser microphone brings state-of-the-art sound for the on-the-go lifestyle to the family of Audio-Technica USB mics.
- Condenser microphone with digital output for convenient, high-resolution recording
- High-quality A/D converter with 24-bit/96 kHz sampling rate for superb, high-resolution audio
- Mic gain control allows you to adjust input level on the mic itself
- Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording and voiceover use
- Compatible with Windows 7 and above, Mac OS 10.6 and above, and iOS 7.02 and above (requires Lightning connector).
- Tripod desk stand with folding legs for secure and easily portable tabletop use
- Included USB and Lightning cables provide ready connectivity to computers and iOS devices
ELEMENT | Fixed-charge back plate, permanently polarized condenser | POLAR PATTERN | Cardioid | FREQUENCY RESPONSE | 20 – 20,000 Hz | POWER REQUIREMENTS | USB (5V DC); Lightning (3.3V DC) | BIT DEPTH | 24 bit | SAMPLE RATE | Up to 96 kHz | VOLUME CONTROL | Mic gain control | WEIGHT | 350 g (12.3 oz) | DIMENSIONS | 162.0 mm (6.38“) long, 52.0 mm (2.05“) maximum body diameter | OUTPUT CONNECTOR | Micro-HDMI | ACCESSORIES FURNISHED | Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 4.9' (1.5 m) USB cable; 4.9' (1.5 m) Lightning cable |
| STUDIO CONDENSER MICROPHONE C-1U
Studio Condenser Microphone with USB Audio Interface and software suite
Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
Plug this amazing USB-mic straight into your computer and turn your PC or Mac computer into a recording system without the need for any other hardware
Directly works with your PC or Mac computer—ultra-low latency ASIO and WDM drivers for PC audio optimization included
Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Pressure-gradient transducer with shock-mounted capsule
- Professional large-diaphragm condenser microphone with built-in 48 kHz USB interface for unsurpassed audio quality
- Gets phantom power directly from PC USB output
- Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software
- Maximum SPL (sound pressure level) of 136 dB
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Ultra-rugged construction with die-cast body
- USB connector and swivel stand mount included
|
Reviews
There are no reviews yet.