| Content |
- Premium ultra low-noise, high headroom analog mixer
- 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
- Neo-classic "British" 3-band EQs for warm and musical sound
- 1 post fader FX send per channel for external FX devices
- Main mix outputs plus separate control room, phones and stereo CD/tape outputs
- CD/tape inputs assignable to main mix or control room/phones outputs
- FX to control room function helps to monitor effect signal via headphones and control room outputs
- Long-wearing 60-mm logarithmic-taper master fader and sealed rotary controls
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
|
The LX7 combines the essential Soundcraft live mixer qualities
with basic recording-oriented features, in a compact frame that's
light enough for one person to carry yet easy to configure and use.
This makes it especially suitable for multi-purpose use in venues
such as small halls and community centres, while its direct channel
outputs make the LX7 an ideal choice for bands who need a live desk
that can double up in the studio.
Housed in a choice of 16, 24 or 32 channel frame, LX7 provides 24,
32 or 40 inputs - with no less than 7 separate bus outputs including
mix, 4 groups and a dedicated mono bus for centre speaker clusters,
side or rear fills. The output count rises to 29 with the inclusion of direct
outs on the first 16 mono inputs and six auxiliary busses.
LX7's balanced mic inputs all use patented Ultramic preamps,
providing 60dB of gain range and 22dBu of headroom. Each input
also includes 4 band EQ with two swept mid frequency controls.
In addition, EQ In/Out switch and steep 18dB/Octave High Pass Filter,
allow effective audio control in difficult venues whilst the six auxiliary sends
are pre-post switchable in pairs from each channel, providing a maximum of
4 pre-fader and six post-fader. This makes LX7 equally applicable
for foldback - heavy performance or in situations where more effects are required.
LX7's groups section houses two further stereo inputs - with EQ, auxiliaries
for keyboards or stereo recording devices - as well as two FX returns. All four
groups are routable to mix and include 12 segment bargraph metering for
accurate monitoring and inserts. Six auxiliary masters on rotary controls also
included AFL soloing.
In the master section there is talkback provision to all pre-fade auxiliaries and
the mix. Global phantom power and a two track return for pre-show music are
also present. A "two-track" to mix switch allows the engineer to play CD's over
the main PA whilst back-stage set-up is going on, with one press of a button.
The mix is also routable to the separate mono bus if mono PAs are required.
LX7 is built in a rugged wedge-shaped steel chassis with an internal power supply,
professional all-metal jackfield and connectors on the rear of the console. All inputs and outputs are balanced.
Applications:
* Gigging Bands
* Small installations
* Small venues
* Theatres
* Houses of Worship
* Live and studio recording
* 100mm faders
* +48V phantom power
* 16, 24 or 32 channel frame sizes
* Up to 40 inputs (including stereo inputs and returns)
* 18dB/octave high-pass filter
* 6 aux sends, 4 of them pre/post switchable
* Group and mix inserts
* 12-segment LED metering
* Integral PSU
| Low-cost high-performance mixers
Key Features
- 6 Mono & 2 Stereo Input Channels
- 6x GB30 Microphone Preamplifiers
- Recording and Live Sound Audio Console
- Compact Mobile Enclosure
The Soundcraft EPM Series provides a straight-forward, yet professional alternative to complex audio mixers. Constructed in a 6-, 8- or 12-channel chassis, the EPM mixers are well-suited for recording and sound reinforcement applications.
The EPM 6 features 6 mono and 2 stereo input channels providing the flexibility needed to accommodate the recording studio, venue or touring musician. All mono inputs feature 1/4" phone line and balanced XLR microphone inputs. The famed GB30 microphone preamps provide the quiet, detailed signal synonymous with Soundcraft\'s large FOH consoles. The stereo inputs provide L/R 1/4" phone connections and are ideal for connecting stereo devices such as keyboards, returning effects, etc.
The EQ section features a sweepable mid-range on all mono channels and provides smooth frequency contouring. Inserts on all mono channels and stereo output enable signal routing to external signal processors. The compact profile, rich sound quality and flexibility of the EPM Series provides everything necessary for use in project recording, video editing, night clubs, bars, meeting halls, houses-of-worship, and more.
6 Mono and 2 Stereo Channels
The EPM 6 features 6 mono microphone and line input channels, 2 stereo inputs feature L/R 1/4" phone connections
Comprehensive Controls
The comprehensive layout is designed to attract users who require a straight-forward mixing environment
GB30 Microphone Preamplifiers
All 12 mono inputs feature Soundcraft\'s GB30 microphone preamps for quiet, clean large-format FOH console quality
Compact and Professional
The EPM Series consoles pack a professional feature set in a compact, mobile enclosure
| Total # Of Inputs |
6x Mono
2x Stereo |
| Mic/Line Inputs |
6x Line Mono: 1/4" TRS Phone
2x Line Stereo: L/R 1/4" TRS Phone
6x Microphone: 3-pin XLR |
| Stereo Line Inputs |
2x Stereo: L/R 1/4" TRS Phone |
| In-Line Inputs/Returns |
No |
| AUX Sends |
2x Aux Sends |
| AUX Returns |
No dedicated returns |
| Inserts |
1/4" TRS Phone - Mono Inputs, Main Stereo Output |
| BUS (Group) Outputs |
Stereo Output Only |
| 2 Trk Master I/O |
Mix L/R: Stereo Paired L/R RCA Phono |
| ALT I/O |
No |
| Monitor Outputs |
Monitor: L/R Stereo Paired 1/4" TRS Phone |
| EQ Section |
Mono Inputs +/- 15 dB
Lo: 80 Hz
Mid: 150 Hz - 3.5 kHz (swept)
Hi: 12 kHz
Q: 1.5
Stereo Inputs +/-15 dB
Lo: 80 Hz
Mid: 720 Hz
Hi: 12 kHz |
| Solo/Mute |
All Input Channels |
| Channel Level Control |
100 mm Faders |
| Trim/Gain Control |
Rotary Potentiometers |
| Phantom Power |
+48 V Phantom |
| Metering |
10-Segment L/R Peak LEDs
+48 V Phantom Power LED
PFL Active LED
Power Indicator LED |
| Frequency Response |
20 Hz to 20 kHz +/-1.5 dB |
| Dynamic Range |
Not specified by manufacturer |
| Signal-to-Noise Ratio |
Noise (22 Hz - 22 kHz measurement bandwidth)
Mic EIN @ max gain, 150 ohms source impedance -127 dBu
Mix @ max, faders to down |
| Total Harmonic Distortion (THD) |
Mic sensitivity 30 dB, +14 dBu @ mix output: |
|
Soundcraft EFX
(EFX8, EFX12)
The Soundcraft EFX™ Series combines all the features of the popular Soundcraft EPM™ mixer with a built-in 24-bit, digital Lexicon® effects processor, expanding the Soundcraft low-cost, multipurpose compact range.
The Soundcraft EFX mixer uses the same AudioDNA® processor featured in many of the Digitech® and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level.
The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility.
The emphasis with the Soundcraft EFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the companyʼs 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles).The Soundcraft EFX also offers all the features of the Soundcraft EPM most notably a configurable aux send, XLR and ¼" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone
Key Features: - 8+2 channel frame sizes
- Built-in 24 bit Lexicon digital effects processor
- 32 FX settings
- Tap Tempo and FX setting store function
- 1 FX send on each channel
- 1 configurable auxiliary bus
- XLR-type and ¼” metal jack connector sockets
- RCA phono stereo playback inputs and record outputs
- 3-band EQ with a swept mid on mono inputs
- 3-band EQ on stereo inputs
- TRS insert sockets and inserts on all mono inputs
- Ten-segment LED output metering
- Intuitive and comprehensive solo system
- Headphone output
- Easily rack mountable
The Soundcraft EFX will find itself in many applications including live music, recording, houses of worship and multi-speaker installations. |
Live 4-Bus Mixing Console
32 Input Channels (24 mono)
XLR Mic: 24 mono channels + 4 stereo channels
Frequency Response: 20Hz – 20kHz
Weight: 39.70 lbs (18.1kg)
Dimensions (H x W x D): 6.38" x 39.92" x 20.98" (162mm x 1014mm x 533mm)
4 Stereo Line Inputs
24 Inserts
Large Illuminated Mute Switches
Stereo inserts
4 Groups with inserts
3-Band EQ with sweepable mids
6 Aux sends
Dual DSP with 100 digital multi-effects
2 Stereo aux return
USB I/O (from aux sends or main mix)
Input gain trim on each channel
24 dB Low cut filter at 75Hz
100mm faders
PFL switches
AFL switches
Phantom power switch (+ 48V)
Mono Out & LPF with sub-woofer containing variable frequency control
2 x 12-segment LED level meter for Main L/R, PFL/AFL. Group 1–4
Talkback mic input
| |
Reviews
There are no reviews yet.