| Content | The Behringer XENYX 802 is a mixer that offers clear and natural sound in a small and portable format. With eight inputs and two high-quality XENYX mic preamps, this versatile mixer is well suited for mixing and recording solo gigs at the local coffee shop, small corporate events, songwriting projects, and more.
The XENYX 802 is quick to set up and operate with all the connections and controls easily reachable on the top of the unit. The first two input channels feature XENYX mic preamps on two XLR connectors, as well as two 1/4" inputs for line-level signals. Switchable, onboard 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones. A gain knob lets you adjust the input level, and a clip LED alerts you if you are overdriving the input. British-style 3-band EQs provide warm and musical tone corrections for your vocals and instruments.
The two sets of stereo inputs enable you to connect stereo keyboards or playback devices to the mixer. Pan (balance) and level controls are included for all inputs. Each channel is equipped with a post-fader FX send for sending signal to an external processor of your choice. There is also a stereo aux return, which can be used to return effects or as a separate stereo input.
The 2-Track section provides an easy way to connect an external 2-track recorder and/or playback device. The 2-Track inputs are assignable to either the main mix or to the control room/phones outputs. The main mix knob controls the signal at both the main outs and 2-Track outputs, while a dedicated knob adjusts the volume for the phone/control room outputs.
- Compact and versatile 8-channel analog mixer for solo gigs or small corporate events
- Two quality XENYX microphone preamps with 130 dB of dynamic range
- Switchable 48V phantom power
- Two balanced mono line inputs
- Two balanced stereo pairs of line inputs
- Neo-classic, British-style 3-band EQs for warm and musical sound
- One mono post-fader FX-send knob per channel for sending signal to external processor
- Stereo aux return for FX applications or as a separate stereo input
- Main mix outputs and separate control room, phones, and stereo 2-Track outputs
- 2-Track inputs assignable to main mix or control room/phones outputs
- Mic channels with low-noise and distortion-free circuitry for natural sound reproduction
- Designed and engineered in Germany
| Microphone Inputs |
2 x XLR, electronically balanced, discrete input circuit
XENYX microphone preamps with 48 V phantom power (switchable) |
| Microphone EIN |
(EIN 20 Hz to 20 kHz)
At 0 Ohm Source Resistance: -134 dB / 135.7 dB A-weighted
At 50 Ohms Source Resistance: -131 dB / 133.3 dB A-weighted
At 150 Ohms Source Resistance: -129 dB / 130.5 dB A-weighted
Frequency Response:
Frequency Response:
Gain Range: +10 to +60 dB
Maximum Input Level: +12 dBu at +10 dB gain
Impedance: 2.6 kOhms, balanced (approximately)
Signal-to-Noise Ratio: 110 dB / 112 dB A-weighted (0 dBu In at +22 dB gain)
Distortion (THD+N): 0.005% / 0.004% A-weighted |
| Line Inputs |
2 x 1/4" / 6.3 mm TRS, electronically balanced
Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately)
Gain Range: -10 to +40 dB
Maximum Input Level: +22 dBu at 0 dB gain |
| Stereo Line Inputs |
2 x pairs of 1/4" / 6.3 mm TRS, electronically balanced
Impedance: 20 kOhms (approximately)
Maximum Input Level: +22 dBu |
| Fade-Out/Crosstalk Attenuation |
Main Fader Closed: 90 dB
Channel Muted: 89.5 dB
Channel Fader Muted: 89 dB |
| Frequency Response |
Microphone Input to Main Out: |
| Equalization |
Low: 80 Hz (±15 dB)
Mid: 2.5 kHz (±15 dB)
High: 12 kHz (±15 dB) |
| FX Send |
1 x 1/4" / 6.3 mm TS, unbalanced
Impedance: 120 Ohms (approximately)
Maximum Output Level: +22 dBu |
| Stereo Aux Returns |
1 x pair of 1/4" / 6.3 mm TRS, electronically balanced
Impedance: Approximately 20 kOhms (balanced), 10 kOhms (unbalanced)
Maximum Input Level: +22 dBu |
| Main Outputs |
2 x 1/4" / 6.3 mm TRS, unbalanced
Impedance: 120 Ohms (approximately)
Maximum Output Level: +22 dBu |
| Control Room Outputs |
2 x 1/4" / 6.3 mm TS, unbalanced
Impedance: 120 Ohms (approximately)
Maximum Output Level: +22 dBu |
| Headphone Output |
1 x 1/4" / 6.3 mm TRS, stereo, unbalanced
Maximum Output Level: +19 dBu / 150 Ohms (+25 dB) |
| 2-Track I/O |
1 x pair RCA, stereo, unbalanced CD/tape inputs
1 x pair RCA, stereo, unbalanced tape outputs |
| Noise |
Main Mix at -∞, Channel Fader at -∞: -106 dB / -109 dB A-weighted
Main Mix at 0 dB, Channel Fader at -∞: -95 dB / -98 dB A-weighted
Main Mix at 0 dB, Channel Fader at 0 dB: -84 dB / -87 dB A-weighted |
| AC Adapter |
Input: 120 V, 60 Hz
Power Consumption: 13 W |
| Dimensions (H x W x D) |
1.9 x 7.4 x 8.7" / 47 x 189 x 220 mm |
| Weight |
3.5 lb / 1.6 kg |
| | Key Features:
- 12+2 channel frame sizes
- Built-in 24 bit Lexicon digital effects processor
- 32 FX settings
- Tap Tempo and FX setting store function
- 1 FX send on each channel
- 1 configurable auxiliary bus
- XLR-type and Ό� metal jack connector sockets
- RCA phono stereo playback inputs and record outputs
- 3-band EQ with a swept mid on mono inputs
- 3-band EQ on stereo inputs
- TRS insert sockets and inserts on all mono inputs
- Ten-segment LED output metering
- Intuitive and comprehensive solo system
- Headphone output
- Easily rack mountable
|
The LX7 combines the essential Soundcraft live mixer qualities
with basic recording-oriented features, in a compact frame that's
light enough for one person to carry yet easy to configure and use.
This makes it especially suitable for multi-purpose use in venues
such as small halls and community centres, while its direct channel
outputs make the LX7 an ideal choice for bands who need a live desk
that can double up in the studio.
Housed in a choice of 16, 24 or 32 channel frame, LX7 provides 24,
32 or 40 inputs - with no less than 7 separate bus outputs including
mix, 4 groups and a dedicated mono bus for centre speaker clusters,
side or rear fills. The output count rises to 29 with the inclusion of direct
outs on the first 16 mono inputs and six auxiliary busses.
LX7's balanced mic inputs all use patented Ultramic preamps,
providing 60dB of gain range and 22dBu of headroom. Each input
also includes 4 band EQ with two swept mid frequency controls.
In addition, EQ In/Out switch and steep 18dB/Octave High Pass Filter,
allow effective audio control in difficult venues whilst the six auxiliary sends
are pre-post switchable in pairs from each channel, providing a maximum of
4 pre-fader and six post-fader. This makes LX7 equally applicable
for foldback - heavy performance or in situations where more effects are required.
LX7's groups section houses two further stereo inputs - with EQ, auxiliaries
for keyboards or stereo recording devices - as well as two FX returns. All four
groups are routable to mix and include 12 segment bargraph metering for
accurate monitoring and inserts. Six auxiliary masters on rotary controls also
included AFL soloing.
In the master section there is talkback provision to all pre-fade auxiliaries and
the mix. Global phantom power and a two track return for pre-show music are
also present. A "two-track" to mix switch allows the engineer to play CD's over
the main PA whilst back-stage set-up is going on, with one press of a button.
The mix is also routable to the separate mono bus if mono PAs are required.
LX7 is built in a rugged wedge-shaped steel chassis with an internal power supply,
professional all-metal jackfield and connectors on the rear of the console. All inputs and outputs are balanced.
Applications:
* Gigging Bands
* Small installations
* Small venues
* Theatres
* Houses of Worship
* Live and studio recording
* 100mm faders
* +48V phantom power
* 16, 24 or 32 channel frame sizes
* Up to 40 inputs (including stereo inputs and returns)
* 18dB/octave high-pass filter
* 6 aux sends, 4 of them pre/post switchable
* Group and mix inserts
* 12-segment LED metering
* Integral PSU
| |
Soundcraft EFX
(EFX8, EFX12)
The Soundcraft EFX™ Series combines all the features of the popular Soundcraft EPM™ mixer with a built-in 24-bit, digital Lexicon® effects processor, expanding the Soundcraft low-cost, multipurpose compact range.
The Soundcraft EFX mixer uses the same AudioDNA® processor featured in many of the Digitech® and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level.
The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility.
The emphasis with the Soundcraft EFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the companyʼs 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles).The Soundcraft EFX also offers all the features of the Soundcraft EPM most notably a configurable aux send, XLR and ¼" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone
Key Features: - 8+2 channel frame sizes
- Built-in 24 bit Lexicon digital effects processor
- 32 FX settings
- Tap Tempo and FX setting store function
- 1 FX send on each channel
- 1 configurable auxiliary bus
- XLR-type and ¼” metal jack connector sockets
- RCA phono stereo playback inputs and record outputs
- 3-band EQ with a swept mid on mono inputs
- 3-band EQ on stereo inputs
- TRS insert sockets and inserts on all mono inputs
- Ten-segment LED output metering
- Intuitive and comprehensive solo system
- Headphone output
- Easily rack mountable
The Soundcraft EFX will find itself in many applications including live music, recording, houses of worship and multi-speaker installations. |
Reviews
There are no reviews yet.