| Content | The Behringer XENYX 802 is a mixer that offers clear and natural sound in a small and portable format. With eight inputs and two high-quality XENYX mic preamps, this versatile mixer is well suited for mixing and recording solo gigs at the local coffee shop, small corporate events, songwriting projects, and more.
The XENYX 802 is quick to set up and operate with all the connections and controls easily reachable on the top of the unit. The first two input channels feature XENYX mic preamps on two XLR connectors, as well as two 1/4" inputs for line-level signals. Switchable, onboard 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones. A gain knob lets you adjust the input level, and a clip LED alerts you if you are overdriving the input. British-style 3-band EQs provide warm and musical tone corrections for your vocals and instruments.
The two sets of stereo inputs enable you to connect stereo keyboards or playback devices to the mixer. Pan (balance) and level controls are included for all inputs. Each channel is equipped with a post-fader FX send for sending signal to an external processor of your choice. There is also a stereo aux return, which can be used to return effects or as a separate stereo input.
The 2-Track section provides an easy way to connect an external 2-track recorder and/or playback device. The 2-Track inputs are assignable to either the main mix or to the control room/phones outputs. The main mix knob controls the signal at both the main outs and 2-Track outputs, while a dedicated knob adjusts the volume for the phone/control room outputs.
- Compact and versatile 8-channel analog mixer for solo gigs or small corporate events
- Two quality XENYX microphone preamps with 130 dB of dynamic range
- Switchable 48V phantom power
- Two balanced mono line inputs
- Two balanced stereo pairs of line inputs
- Neo-classic, British-style 3-band EQs for warm and musical sound
- One mono post-fader FX-send knob per channel for sending signal to external processor
- Stereo aux return for FX applications or as a separate stereo input
- Main mix outputs and separate control room, phones, and stereo 2-Track outputs
- 2-Track inputs assignable to main mix or control room/phones outputs
- Mic channels with low-noise and distortion-free circuitry for natural sound reproduction
- Designed and engineered in Germany
| Microphone Inputs |
2 x XLR, electronically balanced, discrete input circuit
XENYX microphone preamps with 48 V phantom power (switchable) |
| Microphone EIN |
(EIN 20 Hz to 20 kHz)
At 0 Ohm Source Resistance: -134 dB / 135.7 dB A-weighted
At 50 Ohms Source Resistance: -131 dB / 133.3 dB A-weighted
At 150 Ohms Source Resistance: -129 dB / 130.5 dB A-weighted
Frequency Response:
Frequency Response:
Gain Range: +10 to +60 dB
Maximum Input Level: +12 dBu at +10 dB gain
Impedance: 2.6 kOhms, balanced (approximately)
Signal-to-Noise Ratio: 110 dB / 112 dB A-weighted (0 dBu In at +22 dB gain)
Distortion (THD+N): 0.005% / 0.004% A-weighted |
| Line Inputs |
2 x 1/4" / 6.3 mm TRS, electronically balanced
Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately)
Gain Range: -10 to +40 dB
Maximum Input Level: +22 dBu at 0 dB gain |
| Stereo Line Inputs |
2 x pairs of 1/4" / 6.3 mm TRS, electronically balanced
Impedance: 20 kOhms (approximately)
Maximum Input Level: +22 dBu |
| Fade-Out/Crosstalk Attenuation |
Main Fader Closed: 90 dB
Channel Muted: 89.5 dB
Channel Fader Muted: 89 dB |
| Frequency Response |
Microphone Input to Main Out: |
| Equalization |
Low: 80 Hz (±15 dB)
Mid: 2.5 kHz (±15 dB)
High: 12 kHz (±15 dB) |
| FX Send |
1 x 1/4" / 6.3 mm TS, unbalanced
Impedance: 120 Ohms (approximately)
Maximum Output Level: +22 dBu |
| Stereo Aux Returns |
1 x pair of 1/4" / 6.3 mm TRS, electronically balanced
Impedance: Approximately 20 kOhms (balanced), 10 kOhms (unbalanced)
Maximum Input Level: +22 dBu |
| Main Outputs |
2 x 1/4" / 6.3 mm TRS, unbalanced
Impedance: 120 Ohms (approximately)
Maximum Output Level: +22 dBu |
| Control Room Outputs |
2 x 1/4" / 6.3 mm TS, unbalanced
Impedance: 120 Ohms (approximately)
Maximum Output Level: +22 dBu |
| Headphone Output |
1 x 1/4" / 6.3 mm TRS, stereo, unbalanced
Maximum Output Level: +19 dBu / 150 Ohms (+25 dB) |
| 2-Track I/O |
1 x pair RCA, stereo, unbalanced CD/tape inputs
1 x pair RCA, stereo, unbalanced tape outputs |
| Noise |
Main Mix at -∞, Channel Fader at -∞: -106 dB / -109 dB A-weighted
Main Mix at 0 dB, Channel Fader at -∞: -95 dB / -98 dB A-weighted
Main Mix at 0 dB, Channel Fader at 0 dB: -84 dB / -87 dB A-weighted |
| AC Adapter |
Input: 120 V, 60 Hz
Power Consumption: 13 W |
| Dimensions (H x W x D) |
1.9 x 7.4 x 8.7" / 47 x 189 x 220 mm |
| Weight |
3.5 lb / 1.6 kg |
|
Κονσόλα ήχου με νέας γενιάς προενισχυτές GB30, σχεδιασμένη για διπλή χρήση σαν front of house ή stage monitor. Διαθέτει 16 mono εισόδους (mic) με EQ 4 περιοχών (παραμετρικό για mid&low mid), 2 stereo εισόδους με EQ 4 περιοχών, 4 group, 8 AUX, με δυνατότητα εναλλαγής (SWAP) μεταξύ AUX 1-4 & group. Διαθέτει επίσης 4 mute groups, matrix 7x5, direct εξόδους σε κάθε mono είσοδο, ενδεικτικά στάθμης με 12-LED και REC out με limiter. Εσωτερικό τροφοδοτικό με link out για δεύτερο εξωτερικό. Βάρος 22kg. Κατάλληλη για μόνιμες εγκαταστάσεις, θέατρα, live p.a. |
The Soundcraft GB-2 (2-bus) 32 Channel Console is designed for installed sound and A/V applications that donʼt require all the sophisticated functionality of the GB4 and GB8.
However the Soundcraft GB-2 32 Channel Console is a genuine GB Series console in every respect, with sound quality assured by GB30 Mic Pre and Equaliser designs, and reliability by the same rugged build quality that has made the GB4 and GB8 so dependable in demanding professional applications.
Along with six Aux busses and an integral 6 x 2 matrix, four subgroups are provided as two stereo pairs, with a unique facility for adjusting the width of the stereo signal across the stereo mix. The channel pan settings are retained on the group outputs, while the degree of stereo separation to the mix bus is independently adjustable from full stereo through to mono.
The GB2 also features two stereo input channels, with separate mic and line inputs. In normal use, the mic inputs are routed to the local channel and the line inputs act as a stereo return to the mix bus. Selecting the line input to the local channel overrides the mic inputs.
The Soundcraft GB-2 (2-bus) 32 Channel Console Main Features Include:
- 32 channel frame size
- 12 busses
- 2 full feature stereo channels
- 2 stereo returns (on stereo channels)
- 6 Aux sends
- 4 sub groups (paired)
- 6x2 output matrix
- GB30 mic preamp and precision equalisation circuitry
- Direct outputs on every channel
- Talkback facility
- 100mm faders
- Switchable 48V phantom powering on every channel
- 100Hz high pass filter
- 12-segment LED metering
- Record output
- Width: 1247mm (49.09“)
- Weight: 30kg (66.1lbs)
|
Live 4-Bus Mixing Console
32 Input Channels (24 mono)
XLR Mic: 24 mono channels + 4 stereo channels
Frequency Response: 20Hz – 20kHz
Weight: 39.70 lbs (18.1kg)
Dimensions (H x W x D): 6.38" x 39.92" x 20.98" (162mm x 1014mm x 533mm)
4 Stereo Line Inputs
24 Inserts
Large Illuminated Mute Switches
Stereo inserts
4 Groups with inserts
3-Band EQ with sweepable mids
6 Aux sends
Dual DSP with 100 digital multi-effects
2 Stereo aux return
USB I/O (from aux sends or main mix)
Input gain trim on each channel
24 dB Low cut filter at 75Hz
100mm faders
PFL switches
AFL switches
Phantom power switch (+ 48V)
Mono Out & LPF with sub-woofer containing variable frequency control
2 x 12-segment LED level meter for Main L/R, PFL/AFL. Group 1–4
Talkback mic input
|
The highly-acclaimed and successful Soundcraft GB Series has gained another new member, the Soundcraft GB2R.
This 19” rack-mountable mixer is designed specifically for smaller installations in churches and performance venues, or for small portable PA systems. It will also find friends in Broadcast where its high quality and feature set will be very appealing.
Available in two variants, the GB2R offers either 16 mono inputs to a stereo mix output, or a 12.2 version with 12 mono inputs, two full-feature stereo inputs and 2 group busses, each model having 6 auxiliary sends.
As always with Soundcraft consoles, emphasis has been placed on operational simplicity, clear and intuitive layout and the highest possible audio performance. The Soundcraft GB2R inherits both the GB30 Mic preamplifier and GB30 Equaliser designs from the GB4 and GB8.
For ease of installation, the connector section is contained in a rotatable pod, allowing cable access from the top of the mixer if sat on a table-top, or from the rear when mounted in a 19” rack.
On the stereo inputs on the 12.2 model, connectors are provided for both Mic and Line inputs. With Mic signals routed to the local channel, the Line inputs are available as stereo returns to the main mix bus. Two stereo returns and a 2-track (for example CD replay) input are provided, which means that the GB2R-12.2 model can offer up to 26 inputs to mix in a mixer just 19” (485mm) wide.
Every input has a pre/post switchable direct output for recording or effects sends, while an internal universal voltage PSU avoids external power supply connections.
The whole GB Series carries the high quality hallmark with which Soundcraft is synonymous, with engineering and design as youʼd expect from this high-end manufacturer. Careful attention has been given to the mechanical construction, to ensure reliability and ruggedness under strenuous conditions, with all input modules being constructed with individual vertically-mounted pcbʼs, fitted to the steel chassis front panel with individually-nutted potentiometers. - Technical Specifications
- Frequency Response Mic/Line Input to any output, 20Hz - 20kHz..
- THD + N Mic sens. -30dBu, +20dBu at all outputs @1kHz..
- Noise Measured RMS, 22Hz to 22kHz Bandwidth
- Mic E.I.N. @ unity gain,150Ω source impedance.. -128dBu
- Mix Output, 40 inputs routed to mix..
- Group & Centre Outputs..
- Aux Outputs (GB2 Groups only)..
- Matrix Outputs..
- Crosstalk Input Channel Mute..
- (@1kHz, typical) Input Fader cut-off..
- Pan isolation..
- Mix route isolation..
- Group route isolation..
- Adjacent channel crosstalk..
- Group to Mix..
- Aux Send pots offness (typical)..
- Matrix Send pots offness (typical)
- CMRR Typical @ 1kHz.. 80dB
- Input & Output Mono & Stereo Mic Inputs.. +15dBu
- Max Levels Mono & Stereo Line Inputs.. +30dBu
- Stereo Returns & Insert Returns.. +20dBu
- Any output.. +20dBu
- Nominal Operating Level.. 0dBu
- Headphone Power.. 2 x 250mW into 200Ω
- Input & Output Mic Inputs.. 2kΩ
- Impedances Line Inputs and Stereo Returns.. 10kΩ
- Input channels Insert Return.. 5kΩ with EQ in, otherwise 3kΩ
- Mix, Group, Aux, Matrix & Direct outputs.. 150Ω
- Insert sends.. 75Ω
- Recommended Headphone Impedance.. 100 - 600Ω
- High pass filter (Mono input).. 100Hz, 18dB per octave
- EQ (Mono input) HF.. 13kHz, +/-15dB, 2nd order shelving
- Hi-Mid.. 550Hz-13kHz, +/-15dB, Q=1.5
- Lo-Mid.. 80Hz-1.9kHz, +/-15dB, Q=1.5
- LF.. 80Hz, +/-15dB, 2nd order shelving
- EQ (Stereo input) HF.. 13kHz, +/-15dB, 2nd order shelving
- Hi-Mid.. 2.5kHz, +/-15dB, Q=0.8
- Lo-Mid.. 450Hz, +/-15dB, Q=0.8
- LF.. 80Hz, +/-15dB, 2nd order shelving
- Metering Input channels (GB4/GB8).. Single tri-colour 4-segment LED bargraph
- Outputs (GB4).. 7 tri-colour 12-segment LED bargraphs
- Outputs (GB8).. 11 tri-colour 12-segment LED bargraphs,
- + Meterpod with 3 VU meters (L/R/C)
- Outputs (GB2/GB2R).. 2 tri-coloured 12-segment LED bargraphs,
- (indicates monitor source level)
- Power consumption AC mains supply (internal PSU) 85V-270V AC, 50/60Hz universal input
- Power consumption.. Less than 150W
- Operating conditions Temperature range.. -10ºC to +30ºC
- Relative humidity.. 0% to 80%
- Features
- * 19” Rackmountable console
- * 16 channel version, with 16 mono inputs, Stereo Mix and Mono Sum Outputs and 6 Aux Outputs. - Total Inputs to Mix: 22
- * 12.2 channel version, with 12 mono inputs and 2 stereo inputs, 1 Stereo Sub Group Output, Mix and Mono Sum Outputs, and 6 Aux Outputs - Total Inputs to Mix: 26 (when Mics used on stereo input)
- * Rotatable connector pod for top or rear cable entry
- * 8 (GB2R-16) or 10 (GB2R-12.2) busses
- * 2 full feature stereo inputs (GB2R-12.2 version)
- * GB30 Mic preamp and precision EQ on inputs
- * Switchable +48V phantom power on every mic input
- * 100Hz Hi-pass filter
- * Direct outputs on every channel
- * 100mm faders
- * Stereo Mix Output and separate Mono Sum output
- * Record output
- * Internal Universal switched mode PSU
| Low-cost high-performance mixers
Soundcraft have unveiled another addition to the rapidly growing new Soundcraft family, the multi-format low-cost EPM mixers.
The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company�s 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types.
A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Soundcraft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors.
Other Features:
- Frame sizes 12+2
- 2 configurable auxiliary buses
- XLR-type and Ό� metal jack connector sockets
- RCA phono stereo playback inputs and record outputs
- 3-band EQ with a swept mid on mono inputs
- 2-band EQ on stereo inputs
- TRS insert sockets and inserts on all mono inputs and mix output
- Ten-segment LED output metering
- Intuitive and comprehensive solo system
- Headphone output
- Easily rack mountable
|
|
Reviews
There are no reviews yet.