855ENH – COAX MINI RG59/U LSZH DIGITAL VIDEO COAX [0.6/2.8] MINI RG59/U LSZH CLASSICS PRO Product Overview Environmental Space: Indoor – Euroclass Dca Suitable Applications: Low loss HDTV/SDI Digital coax used in critical analog and digital video circuits and high quality applications such as live broadcast in network studios and pre- or post-production facilities; Cable […]
855ENH – COAX MINI RG59/U LSZH DIGITAL VIDEO
COAX [0.6/2.8] MINI RG59/U LSZH CLASSICS PRO
Product Overview
| Environmental Space: | Indoor – Euroclass Dca |
| Suitable Applications: | Low loss HDTV/SDI Digital coax used in critical analog and digital video circuits and high quality applications such as live broadcast in network studios and pre- or post-production facilities; Cable is suitable for indoor and outdoor use |
Physical Characteristics (Overall)
Conductor
| Element | Stranding | Material | Nominal Diameter | Diameter +/- Tolerance | No. of Coax |
|---|---|---|---|---|---|
| Solid | BC – Bare Copper | 0.65 mm | 0.02 mm | 1 | |
| ` |
| Conductor Count: | 1 |
| Conductor Size: | 22 AWG |
Insulation
| Type | Material | Nominal Diameter | Diameter +/- Tolerance |
|---|---|---|---|
| Dielectric | FPE – Foamed Polyethylene | 2.9 mm | 0.15 mm |
Outer Shield Material
| Type | Layer | Material | Coverage [%] | Min. Overlap | Nominal Diameter | Coverage +/- Tolerance |
|---|---|---|---|---|---|---|
| Tape | 1 | Aluminum/Polyester/Aluminum | 2 mm | |||
| Braid | 2 | TC – Tinned Copper | 90 % | 3.45 mm | 5 % |
Outer Jacket Material
| Material | Nominal Diameter | Diameter +/- Tolerance |
|---|---|---|
| LSZH / FRNC | 4.45 mm | 0.2 mm |
| OuterJacket1, Table Note: | According to EN 50290-2-20 |
Construction and Dimensions
| Min Elongation at Breakof Jacket: | 125 % |
| Min Tensile Strength of Jacket: | 9 MPa |
Electrical Characteristics
Conductor DCR
| Max. Conductor DCR | Max. Shield DCR |
|---|---|
| 55 Ohm/km | 17 Ohm/km |
Capacitance
| Nom. Capacitance | Capacitance Tolerance |
|---|---|
| 53 pF/m | 2 pF/m |
Impedance
| Nominal Characteristic Impedance | Nominal Characteristic Tolerance |
|---|---|
| 75 Ohm | 3 Ohm |
High Frequency (Nominal/Typical)
| Frequency [MHz] | Nom. Insertion Loss |
|---|---|
| 1 MHz | 1.7 dB/100m |
| 3.6 MHz | 2.5 dB/100m |
| 5 MHz | 2.8 dB/100m |
| 6 MHz | 3 dB/100m |
| 7 MHz | 3.2 dB/100m |
| 10 MHz | 3.7 dB/100m |
| 12 MHz | 4 dB/100m |
| 25 MHz | 5.4 dB/100m |
| 67.5 MHz | 8.3 dB/100m |
| 71.5 MHz | 8.6 dB/100m |
| 88.5 MHz | 9.5 dB/100m |
| 100 MHz | 10 dB/100m |
| 135 MHz | 11.5 dB/100m |
| 143 MHz | 11.9 dB/100m |
| 180 MHz | 13.2 dB/100m |
| 270 MHz | 16.1 dB/100m |
| 360 MHz | 18.6 dB/100m |
| 540 MHz | 22.8 dB/100m |
| 720 MHz | 26.4 dB/100m |
| 750 MHz | 26.9 dB/100m |
| 1000 MHz | 31.3 dB/100m |
| 1500 MHz | 38.7 dB/100m |
| 2000 MHz | 45 dB/100m |
| 2250 MHz | 48 dB/100m |
| 2500 MHz | 50.8 dB/100m |
| 3000 MHz | 56.1 dB/100m |
| 4000 MHz | 65.7 dB/100m |
| 4500 MHz | 70.2 dB/100m |
Delay
| Nominal Delay | Nominal Velocity of Propagation (VP) [%] | Velocity of Propagation Tolerance |
|---|---|---|
| 400 ns/ft | 84 % | 2 % |
High Freq
| Frequency [MHz] | Min. RL (Return Loss) [dB] |
|---|---|
| 5 – 1600 MHz | 23 dB |
| 1600 – 4500 MHz | 21 dB |
Screening
| Frequency [MHz] | Min. Screening Attenuation After Flexing |
|---|---|
| 30 – 1000 MHz | 85 dB |
| 1000 – 2000 MHz | 85 dB |
| 2000 – 3000 MHz | 85 dB |
| 3000 – 4500 MHz | 80 dB |
| Screening Class: | B |
Transfer Impedance
| Frequency [MHz] | Transfer Impedance |
|---|---|
| 5-30 MHz | Max. 15 mOhm/m |
Voltage
| Voltage Rating [V] |
|---|
| 50 V AC |
| 75 V DC |
Temperature Range
| Installation Temp Range: | -5°C To +50°C |
| Storage Temp Range: | -30°C To +70°C |
| Operating Temp Range: | -30°C To +70°C |
Mechanical Characteristics
| Max Recommended Pulling Tension: | 160 N |
| Min Bend Radius (W/o Pulling Strength): | 45 mm |
Standards
| CPR Euroclass: | Dca-s1,d1,a1 |
| CENELEC Compliance: | EN 50117-1 and EN 50290-2-20 |
| RG Type: | Mini 59/U Type |
Applicable Environmental and Other Programs
| EU RoHS Compliance Date (yyyy-mm-dd): | 2005-01-01 |
Flammability, LS0H, Toxicity Testing
| ISO/IEC Flammability: | IEC 60332-1-2 and IEC 60332-3-24 |
| Other Flammability: | CEI 20-35/1 |
| LOI of Jacket: | Min. 35 % |
| Amount of Halogen acc. to IEC 60754-1 & EN50267-1: | Zero |
Reviews
There are no reviews yet.