| Content | 80 Ohm specs
- Type Over-ear (Closed)
- Channels Stereo
- Noise isolation 18 dB reduction
- Connections 3.5mm stereo, 6.25mm stereo
- Weight 9.52 oz
General
- Type Over-ear (Closed)
- Cable type Y-cable
- Channels Stereo
Other features
- Plug type Straight
- Gold-plated connector Yes
Audio quality
Noise reduction
- Noise isolation 18 dB reduction
Connections
- Connections 3.5mm stereo, 6.25mm stereo
| With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 22,000 Hz
- Max Input Power: 1,300 mW @ 1KHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Folding/collapsible: Yes
- Weight: (Without cable) 7.8 oz (220 g)
- Cable - Detachable: No
- Cable: 3 m (9.84') Straight cable, left-side exit
- Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
|
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
| The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
| DT 990 PRO
Professional headphone for studio applications, open
Features
Open, diffuse-field systems
Professional version of the oftentimes awarded DT 990
Excellent sound reproduction
Robust spring steel headband
Single-sided cable
Soft replaceable ear cushions
Gold plated stereo mini jack and 1/4" adapter
Technical Specifications
Transducer type Dynamic
Operating principle Open
Weight without cable 250 g
Frequency response 5 - 35,000 Hz.
Nominal impedance acc. to IEC 60268-7 250 Ω /System
Nominal SPL acc. to IEC 60268-7 > 96 dB
Nominal THD acc. to IEC 60268-7
Power handling capacity acc. to IEC 60268-7 100 mW
Sound coupling to the ear Circumaural
Average pressure on ear acc. to IEC 60268-7 3.5 N |
The SRH1440 Professional Open Back Headphones provide full-range audio with detailed highs and rich bass in a sleek, attractive design. Made for mastering and critical listening, the premium padded headband with steel frame offers hours of listening comfort.
The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.
40 mm Neodymium drivers deliver full-range audio with rich, controlled bass
Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field
Impedance optimized for direct connection to wide range of portable audio devices
Fully adjustable, premium padded headband with steel frame and sleek, ergonomic design for hours of listening comfort
Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability
Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement
Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort
Individually tested and serialized
Legendary Shure durability to withstand the rigors of everyday use
Type
Open-back, circumaural
Frequency Range
15 Hz – 27 kHz
Cable Length
6.9 ft (2.1 m)
Plug
Gold-plated 1/8" (3.5 mm) stereo mini-jack
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual
|
Reviews
There are no reviews yet.