| Content | Electric Amplifier for Guitar
- Sound and features redesigned
- The patented ISF Tone Control makes versatile sounds possible for all genres
- 3 Channels: Clean, Crunch and Lead
- Effects: Chorus, Delay and Reverb
- Controller: patented ISF control, Gain, Volume
- 3.5 mm Frequency-corrected headphone jack
- 3.5 mm Aux-In/MP3 connection
- Integrated 6.3 mm mono jack for direct connection to the electric guitar
- Suitable for all types of jack sockets due to foldable plug
Dimensions (W x H x D): 86 x 31 x 80 mm
Weight: 40 g | The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped.
In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation.
A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback.
The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.
- Model Name: LDHPA1
- Product Type: headphone amplifier
- Type: 1-channel stereo
- Inputs: Main Input (Stereo), 1 x Aux In (Stereo)
- Input Connections: XLR-F (L + R Input, balanced), 3.5 mm stereo jack (Aux In)
- Input Impedance: 6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
- Input Sensitivity: 3 dBu (XLR In), -6 dBV (3.5 mm jack)
- Max. Input Level: 16 dBu (XLR In), 7 dBV (3.5 mm jack)
- Protection Circuits: Audio Limiter, Max. Input leveling, Power OFF -Mute relay
- Headphone Outputs: 1
- Headphone Output Connectors: 3.5 mm stereo jack
- Power Output: 2 x 1.65 Vrms / 1% THD 33 Ohm Load
- Minimal Connected Impedance per Channel: 16 ohms
- Frequency Response: 20 Hz - 40,000 Hz
- THD 1 kHz Sine: 0.04%
- Controls: Power/Volume, Balance L/R, Stereo/Mono (Focus) switch,
- Indicators: Signal (Green) / Peak (Amber), Battery (low battery: red) / Power LED (Power ON: green)
- Power Supply: 9 V DC block battery, DC jack
- Operating Voltage: 9 V DC
- Power Consumption: Nom. 70 mA / Max. 150 mA
- Housing Material: plastic
- Housing Surface: soft-touch
- Housing Colour: black
- Width: 80 mm
- Height: 42.5 mm
- Depth: 133 mm
- Accessories (included): belt clip, 1 m 3.5 mm stereo jack cable
|
- Distributes the signal of 1 audio source to 4 sets of headphones
- 4 channels with separate level controls and headphone outputs
- All connections via 6.3 mm (1/4“) jacks
- Operation via supplied power unit
|
MyMONITOR - Personal Headphone Monitor Mixer Overview
Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.
MyMONITOR - Personal Headphone Monitor Mixer Specifications:
Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)
|
HeadAMP - Four Output Stereo Headphone Amp Overview
Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).
HeadAMP - Four Output Stereo Headphone Amp Specifications:
Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included)
Total Harmonic Distortion | The VOX AMPLUG AC30 Guitar Headphone Amplifier, AC30 voicing. Plugs directly into your guitar, a great-sounding headphone guitar amp that gives you serious sound fast.
The VOX amPlug AC30 is your fastest ticket to great tone – anytime, anywhere! Jamming late at night? Donʼt want to wake the neighbours? Maybe you want to work out a lick with your MP3 player without taking the time to set up your amp. You want to play guitar right now. amPlug is the answer. Simply plug this palm-sized headphone guitar amp directly into your guitar, and enjoy serious guitar sound anywhere, anytime. VOX amPlug AC30 is based on a vintage VOX AC30. Even with its ultra-compact size, amPlug AC-30 perfectly reproduces the complex and warm distortion that is distinctive of a vacuum tube. Using all new analog modeling technology, amPlug delivers full-fledged amp sound. With its completely analog design, great care was also taken with amPlug's gain circuitry. The "AC30" uses two natural-sounding gain stages to reproduce the distinctive AC30 tone. Even the circuit response of the original amp is simulated completely. The simulation extends not only to the response of the tone circuits, but also to the way in which the high frequency and gain are affected when you turn down the volume control of the guitar. Every detail has been faithfully reproduced. With up to fifteen hours of battery life, it's easy to take amPlug anywhere. In addition to practicing at home, it's a great way to warm up before a live performance or on the road. And amPlug is not just a convenient way to get great guitar sound. There's also an AUX input jack so you can jam along with your CD/MP3 player.
The main features of the VOX AMPLUG AC30 include:
- Plugs directly into your guitar, a great-sounding headphone guitar amp that gives you serious sound fast
- AUX in jack lets you jam along with your CD/MP3 player
- 100% analog circuit faithfully simulates the response of the original amps
- AC30 emulates the AC30 top boost sound of a vintage VOX AC30
- Up to 15 hours of battery life with two Alkaline AAA batteries
- Quick and easy setup! Just connect amPlug to your guitar and enjoy serious sound
- Dimensions (W x D x H): 86 x 80 x 31 (mm), 3.39 x 3.15 x 1.22 inches
- Weight: 40g /1.41oz. (not including batteries)
- Included items: two AAA zinc-carbon batteries
|
Reviews
There are no reviews yet.