| Content |
The LT BOOSTʼs patent-applied-for gain circuit is designed to push your guitar amp into smooth overdrive and has been refined to ensure the maximum delivery of your dynamics and tone. This is an extremely flexible pedal and can be used into a clean amp as a volume boost, an additional equalisation stage, or to drive your amplifier into dynamic overdrive.
Features
- Patent-Applied-For clipping circuit that matches the tone and response of our valve pedals
- Continuously variable boost
- Bass and Treble controls for tonal refinement
- 9V battery powered
- Small form-factor - great for pedalboards
- Rugged construction
| Application: | Εl.Guitar | | Type: | Single | | Effect: | Boost |
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
| Nominal Input Level |
-20 dBu |
| Input Impedance |
1 M ohm |
| Nominal Output Level |
-20 dBu |
| Output Impedance |
1 k ohm |
| Recommended Load Impedance |
10 k ohms or greater |
| Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
| Indicator |
CHECK indicator (Serves also as battery check indicator) |
| Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
| Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
| Current Draw |
36 mA (DC 9 V) |
| Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
| Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
| Options |
AC Adaptor (PSA series) |
| Size and Weight |
| Width |
|
| Depth |
|
| Height |
|
| Weight |
|
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
|
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
| Nominal Input Level | -20 dBu |
|---|
| Input Impedance | 1 M ohms |
|---|
| Nominal Output Level | -20 dBu |
|---|
| Output Impedance | 1 k ohms |
|---|
| Recommended Load Impedance | 10 k ohms or greater |
|---|
| Residual Noise Level | -92 dBu (IHF-A, Typ.) |
|---|
| Connectors | INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) |
|---|
| Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
|---|
| Current Draw | 50 mA (DC 9 V) |
|---|
| Accessories | Dry Battery 9 V type (6F22/9 V) |
|---|
| Options | AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U) |
|---|
| Size and Weight ( incl. battery ) |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
| Wah-Wah Pedal HB-01 hell-babe
The HELL-BABE HB01 is unlike any wah you’ve ever stepped on, offering a tremendous array of tone-sculpting options. You get everything from “old-school” wah to the most up-to-date sounds, all in one mesmerizing effects pedal. Add to that optical control that does away with noisy pots, an adjustable spring mechanism and tunable boost, and this babe’s a contender! The HELL-BABE will add new dimension and depth to your artistic expression.
What’s So Great About the HELL-BABE?
First of all, the HB01’s heel-down Range control provides low frequency adjustment that can be swept from 440 Hz down to 250 Hz, making the HB01 the ideal companion for either guitar or bass. For custom-tailoring the toe-down frequency range, the HELL-BABE features a Fine control, allowing you to adjust the frequency sweep as high as 2.2 kHz.
Volume Boost
You can even dial in a powerful volume Boost (up to +15 dB), so that when you do step on the HB01, your guitar will rise to the top of the mix. A highly versatile Q control is provided for precise filter shaping and for achieving vocal-like effects.
|
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
- Snake Charmer Compressor CT05
- Connection: Input: x1 (guitar input), Output: x1 (line output)
- Input / Output Impedance: 830 k-ohm / 4 k-ohm
- Tube: 12AU7 (ECC82)
- Power Supply: Four AA alkaline batteries or DC9V AC adapter
- Battery Life: Approx. 18 hours
- Current Consumption: 95 mA
- Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
- Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
- Included Items: Four AA alkaline batteries
|
Reviews
There are no reviews yet.