| Content |
Blackstar are proud to introduce the new ID:Core BEAM. Based on the control set of the critically acclaimed and best-selling ID:Core series of guitar amps, the ID:Core BEAM takes incredible guitar tone into the home and becomes the central hub for instruments and stunning music playback. The ID:Core BEAM is the first Blackstar product with Bluetooth functionality, allowing you to stream your music to the amplifier. The hi-fi quality playback of your MP3s through the ID:Core BEAM will redefine what you can expect from a multifunctional product and with Super Wide Stereo the sound will fill the room.
With two bass, six electric guitar, two acoustic and two acoustic simulator Voices, and with a sealed and ported cabinet construction for optimum bass response and stereo definition, the ID:Core BEAM is the ultimate musicians amp for the home. The retro-cool design means ID:Core BEAM will look at home in any room in the house.
|
- Hand-built 22-Watt guitar combo driven by 2 x EL84 valves
- Way cool vintage look and feel
- Original heavy-duty 12" BUGERA guitar speaker for true vintage sound
- Authentic 2-channel preamp design from the '60s featuring 3 x 12AX7 valves—everything from purring blues to mind-blowing crunch
- Integrated high-class reverb with dedicated Reverb control
- Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
- Normal and Bright inputs for ultimate sound character to perfectly match your guitar
- Multi-gain stage Lead channel with Pre, Post gain and Master controls
- Amazing Mode switch to select between Triode or Pentode operation
- Impedance connectors (4, 8 and 16 Ohms) to match virtually any external speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
The AD15VT-XL is part of the NEW VOX Valvetronix XL line, an exciting new range of tube-powered modelling amplifiers that delivers the power and punch that modern rock players require, with a selection of hi-gain sounds that span the entire range of heavy rock music.
Features of the Vox AD15VT XL:
Eleven amp sounds
Sophisticated modelling technology is used to provide eleven different amps, including classic vintage amps of the past, costly, modern high-end amps and high-gain hybrids, all accessible at the turn of a knob. These new models include Glass, modelled on the Clean channel of a collectable 100-Watt head named the Overdrive Special; Funked, modeled on a classic American black-faced 2x12 combo; Buzzsaw, inspired by the British-made 50-Watt head that created the sounds of ʽ70s hard rock and metal; Crunched, based on a very rare modded VOX AC30/6TBX Top Boost combo, adding new hot-rodded gain levels and EQ; Thrashed, modelled on a 1983, all tube, single channel, master volume 100-Watt head; Raged, based on the high gain channel of a modern, all-tube 100 Watter, with boosted bass and mid frequencies and even more gain; Modern, a still higher gain modification to the "Modern High Gain” channel, with scooped EQ; Fluid, the UK Modern setting with maximum gain and mid-range EQ, modified to emphasize a vocal-like tone for legato-style playing; Molten, based on VOXʼs US Hi-Gain model but capable of even more powerful, heavily saturated sounds, with an Octave effect mixed into the preset; Black, a version of the UK Modern mutated to Class A, rather than Class AB; and Damaged, rooted in VOXʼs US Hi-Gain model with more gain and a completely re-voiced and modified EQ to be thicker and darker.
Eleven high-quality effects
Are built in, including compressor, delay, reverb, compressor & chorus, compressor & phaser, chorus & delay, chorus & reverb, flanger & reverb, tremolo & reverb, and rotary & reverb, plus Noise Reduction. New for th XL series is an Octave effect for massive lead tones. Effect parameters are fully adjustable and a Tap button makes it easy to set your delay time or modulation speed.
Store amp and effect settings
Store your favourite amp and effect settings as a program, containing two different settings (CH1 and CH2). Switch between these settings from the top panel, or by using the optional VFS2 foot switch connected to the rear panel. In addition, there is a preset program for each amp type.
Manual mode
In Manual mode the sound you hear reflects the physical settings of the knobs. Youʼre in control. Connect an optional VFS2 dual foot switch (sold separately) to switch programs or bypass effects. A power level control (not available on AD15VT-XL) adjusts the output wattage of the power amp. This means that even when the master volume is turned up all the way to drive the Valve Reactor power amp, you can adjust the volume without losing any tone.
Specifications of the VOX AD15VT XL - Number of amp types: 11
- Number of effects: 11
- Noise reduction: 1
- Number of programs: 11 preset, 2 channel
- Input/output jacks:
- Top panel: 1 x INPUT
- Rear panel: 1 x FOOT SW jack, 1 x LINE/PHONE jack
- Power amp output: Maximum 15W RMS @ 8 ohms
- Speaker: 1 x VOX original (10 inch 8 ohm)
- Weight: 11kg/24.25lbs
- Options (sold separately): VFS2 dual foot switch
|
Marshall 1962 Bluesbreaker Combo Guitar Amplifier
Used by Clapton during his stint with Mayall's Bluesbreakers. It's a JTM45 in combo form with a footswitchable tremolo. It produces a gutsy bass and vibrant top, coupled with an overall natural warmth. 45W. Dimensions: 740x600x235 mm. Weight: 30.2 Kg.
|
- 30-watt, 2x12" combo guitar amplifier
- Two channels with independent volume controls — Normal and Top Boost
- Reverb and Tremolo effects onboard (controllable via optional footswitch)
- Master volume section with Tone Cut and Volume controls
- True bypass effects loop for bringing in your own pedals
- Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
- 16-ohm output jack for running a cabinet along with the internal speakers
- Features two 12" 8-ohm Celestion Alnico Blue speakers
- Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
- Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
- Weight: 73.59 lbs.
|
From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:
50W power
All-valve, with 5 x ECC83s, and 2 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England
|
Reviews
There are no reviews yet.