BLACKSTAR ID: Core 10 V2 Red Stereo Digital Electric Guitar Amplifier

• Type:Modeling
• Number of Channels:6 voices
• Total Power:2 x 5W stereo amp
• Speaker Size:2 x 3“
• Reverb:Yes
• Effects:Stereo Modulation, Delay, Chorus/Flange, Envelope Filter
• EQ:ISF tone control
• Inputs:1 x 1/4“, 1 x 1/8" (aux in)
• Outputs:1 x 1/8" (emulated out/headphones)
• USB:1 x Mini-B
• Headphones:Yes
• Computer Connectivity:USB
• Software:Presonus Studio One Prime
• Power Source:AC adapter included
• Height:10.4“
• Width:13.3“
• Depth:7.3“
• Weight:8.1 lbs.

 * 30-watt, 2x12" combo guitar amplifier
    * Two channels with independent volume controls — Normal and Top Boost
    * Reverb and Tremolo effects onboard (controllable via optional footswitch)
    * Master volume section with Tone Cut and Volume controls
    * True bypass effects loop for bringing in your own pedals
    * Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
    * 16-ohm output jack for running a cabinet along with the internal speakers
    * Features two 12" 8-ohm Celestion G12M Greenback speakers
    * Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
    * Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
    * Weight: 70.99 lbs.

From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM

Marshall JVM 205C Specs:

50W power
All-valve, with 5 x ECC83s, and 2 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England

The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.

Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30

Vox AD50VT 50W Guitar Amplifier

Number of amp types: 11
Number of effects: 11, Noise reduction: 1
Number of programs: 11 preset, 2 channel.
Input/output jacks: Top panel ??? 1 x INPUT. Rear panel ??? 1 x FOOT SW , 1 x LINE/ PHONE,
(AD100VT, AD50VT & AD50VT121 only) 1 x EXTERNAL SPEAKER OUT, (AD100VT only) 1 x LOOP RETURN Jack
1 x LOOP SEND Jack.
Power amp output:AD100VT = maximum 100 RMS @ 8 ohms, AD50VT(212) = maximum 50W RMS @ 8 ohms
AD30VT = maximum 30W RMS @ 8 ohms, AD15VT = maximum 15W RMS @ 8 ohms.
Adjustable Output Wattage (AD100VT, 50VT, 50VT-212, 30VT).
Speaker: AD100VT = 2 x 12 inch VOX oringinal 16 ohm, AD50VT-212 = 2 x 12 inch VOX oringinal 16 ohm
AD50VT = 1x Celestion 70/80 (12 inch 8 ohm), AD30VT = 1x VOX original (10 inch 8 ohm), AD15VT = 1x VOX original
(8 inch 8 ohm),
Signal processing A/D conversion: 24-bit, D/A conversion: 24-bit, Sampling frequency: 44.1 kHz .
Power supply requirements: AC, local voltage.
Power consumption: AD100VT=100W, AD50VT(212)=52W, AD30VT=45W, AD15VT=23W
Dimensions: AD100VT = 55.3cms (21.77“) (H) x 68.4cms (26.93“) (W) x 26.8cms (10.55“) (D),
AD50VT-212 = 48.5cms (19.09“) (H) x 67.3cms (26.50“) (W) x 26.5cms (10.43“) (D),
AD50VT = 50.67cms (19.95“) (H) x 57.81cms (22.76“) (W) x 26.5cms (10.43“) (D),
AD30VT = 43cms (16.93“) (H) x 45.59cms (17.95“) (W) x 22.40 cms (8.82“) (D),
AD15VT = 39.5cms (15.55“) (H) x 42.8cms (16.85“) (W) x 22.4cms (8.82“) (D)
Weight: AD100VT = 29kg (63.93lbs), AD50VT-212 = 23kg (50.71lbs), AD50VT = 20kgs (44.09lbs)
AD30VT = 12kgs (26.46lbs), AD15VT = 10kgs (22.05lbs) .
Included items: power cable .
Options (sold separately): VFS2 dual foot switch.