Content | Utilising the revolutionary technologies of Blackstar’s award winning ID:Core range, the ID:Core 100 and 150 stereo combos are the latest models to the family bringing brand new features such as infinite looping and octave modulation in a high wattage and lightweight package perfect for the gigging guitarist.
Specs:
- Power: 100 W / 2x 50W
- Speakers: 2x 10 "
- 6 Blackstar Voices: Warm Clean, Bright, Clean, Crunch, Super Crunch, OD 1 and OD 2
- Variable sound spectrum from British to American sounds via patented ISF control
- 12 typical vintage effects - delay, reverb, etc.
- Up to 36 sounds are storable
- Integrated looper
- USB port
- Aux In
- Line output with speaker emulation
- Stereo FX Loop
- Incl. footswitch
Power: |
100W (2x50W) |
Speaker: |
2x10“ |
Effect: |
12 Vintage |
Modeling Technology: |
Patented ISF control |
Sounds: |
36 |
Equalizer: |
Ναί |
Outs: |
Line output with speaker emulation |
Inputs: |
Aux In |
Ποδοδιακόπτης: |
Ναί |
FX Loop : |
Ναί |
|
- Hand-built 22-Watt guitar combo driven by 2 x EL84 valves
- Way cool vintage look and feel
- Original heavy-duty 12" BUGERA guitar speaker for true vintage sound
- Authentic 2-channel preamp design from the '60s featuring 3 x 12AX7 valves—everything from purring blues to mind-blowing crunch
- Integrated high-class reverb with dedicated Reverb control
- Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
- Normal and Bright inputs for ultimate sound character to perfectly match your guitar
- Multi-gain stage Lead channel with Pre, Post gain and Master controls
- Amazing Mode switch to select between Triode or Pentode operation
- Impedance connectors (4, 8 and 16 Ohms) to match virtually any external speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
- Hand-built and hand-wired 120-Watt Class A/B amplifier driven by 4 x 6L6 tubes (now fully compatible with EL34 and 5881, etc.)
- 2 original 12" BUGERA guitar speakers optimized for tight low-end and modern-vintage mids
- Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 valves for boutique clean and face-melting hi-gain tone
- Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
- Revolutionary INFINIUM Tube Life Multiplier technology:
- Extends the life of your amplifierʼs expensive power valves up to 20 times.
- Provides incredible reliability and consistent tone over the complete lifespan of your valves
- No need for expensive matched valve sets
- Allows you to mix and match any combination of compatible valve types and brands
- Monitors performance of each power tube continuously and displays defective valves to allow for easy and individual replacement
- Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
- Power amp damping switchable (High, Medium, Low) for total sound control
- Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
- Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
- Line output with dedicated Level control
- Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged constructionensure long life
| MINI GUITAR AMP MARSHALL MS-2
1" Speaker, 2 Watts
Volume Tone Control.
Channel Switch (clean/overdrive).
Headphone Out.
Colour: Black, Vintage Look.
Power Supply: 9V Battery or AC adaptor (not included).
Dimensions:
Width: 110 mm
Depth: 60 mm
Height: 140 mm
Weight: 0.34kg |
Vox AD50VT 50W Guitar Amplifier
Number of amp types: 11 Number of effects: 11, Noise reduction: 1 Number of programs: 11 preset, 2 channel. Input/output jacks: Top panel ??? 1 x INPUT. Rear panel ??? 1 x FOOT SW , 1 x LINE/ PHONE, (AD100VT, AD50VT & AD50VT121 only) 1 x EXTERNAL SPEAKER OUT, (AD100VT only) 1 x LOOP RETURN Jack 1 x LOOP SEND Jack. Power amp output:AD100VT = maximum 100 RMS @ 8 ohms, AD50VT(212) = maximum 50W RMS @ 8 ohms AD30VT = maximum 30W RMS @ 8 ohms, AD15VT = maximum 15W RMS @ 8 ohms. Adjustable Output Wattage (AD100VT, 50VT, 50VT-212, 30VT). Speaker: AD100VT = 2 x 12 inch VOX oringinal 16 ohm, AD50VT-212 = 2 x 12 inch VOX oringinal 16 ohm AD50VT = 1x Celestion 70/80 (12 inch 8 ohm), AD30VT = 1x VOX original (10 inch 8 ohm), AD15VT = 1x VOX original (8 inch 8 ohm), Signal processing A/D conversion: 24-bit, D/A conversion: 24-bit, Sampling frequency: 44.1 kHz . Power supply requirements: AC, local voltage. Power consumption: AD100VT=100W, AD50VT(212)=52W, AD30VT=45W, AD15VT=23W Dimensions: AD100VT = 55.3cms (21.77“) (H) x 68.4cms (26.93“) (W) x 26.8cms (10.55“) (D), AD50VT-212 = 48.5cms (19.09“) (H) x 67.3cms (26.50“) (W) x 26.5cms (10.43“) (D), AD50VT = 50.67cms (19.95“) (H) x 57.81cms (22.76“) (W) x 26.5cms (10.43“) (D), AD30VT = 43cms (16.93“) (H) x 45.59cms (17.95“) (W) x 22.40 cms (8.82“) (D), AD15VT = 39.5cms (15.55“) (H) x 42.8cms (16.85“) (W) x 22.4cms (8.82“) (D) Weight: AD100VT = 29kg (63.93lbs), AD50VT-212 = 23kg (50.71lbs), AD50VT = 20kgs (44.09lbs) AD30VT = 12kgs (26.46lbs), AD15VT = 10kgs (22.05lbs) . Included items: power cable . Options (sold separately): VFS2 dual foot switch. | The MS-4 is the ultimate in portable battery/mains adapter operated micro amps, packing a full 4 Watt of Marshall tone into a tiny case. This mighty micro Marshall half-stack has switchable Clean and Overdrive modes. A single Tone control provides full focus of bass to treble.
Technical Info
Dimensions (H x W x D): 26 x 11 x 6cm
Finished in traditional Marshall black
White logo
Gold panel
Power Supply: 9V Battery or AC adaptor (not included).
Headphone Out. |
Reviews
There are no reviews yet.