Content |
The Blackstar Unity Bass U250 bass combo amplifier was built for tonal flexibility. Switch between three power amp stages via the U250\'s Response control to shape your compression, natural drive, and dynamics. Choose between three distinct preamp voicings, and then sculpt the result with a 3-band EQ. Increase your bass\'s punch, depth, and low end, with compression, chorus, and sub-octave effects. The U250 is loaded with enough connectivity for live, studio, and home use. And if you want to beef up your output onstage, you can add a Unity U250ACT powered cabinet for an extra 250 watts of power.
Specs:
- Type:Solid State
- Number of Channels:1-channel, 3 x voices, 3 x drives
- Total Power:250W
- Speakers:1 x 15" Custom Eminence Opus speaker
- Effects:Chorus, Octave
- Compression:Yes
- EQ:3-band EQ with Mid Frequency
- Amp Modeling:Linear, 6L6, 6550 power models
- Inputs:1 x 1/4" (instrument), 1 x 1/8" (mp3/line in)
- Outputs:1 x 1/4" (line out/headphones), 1 x XLR (DI out), 1 x XLR (cab link)
- Headphones:Yes
- Effects Loop:Yes
- Footswitch I/O:1 x 1/4" (overdrive, effect)
- Footswitch Included:No
- USB:1 x Type Mini-B
- Power Source:Standard IEC AC cable
Power: |
250W |
Driver: |
1 x 15" Custom Eminence Opus speaker |
Effects: |
Chorus, Octave |
Modeling Technology: |
Linear, 6L6, 6550 power models |
Channels: |
1-channel, 3 x voices, 3 x drives |
Equalizer: |
3-band EQ with Mid Frequency |
Output: |
1 x 1/4" (line out/headphones), 1 x XLR (DI out), 1 x XLR (cab link) |
Inputs: |
1 x 1/4" (instrument), 1 x 1/8" (mp3/line in) |
Footswitch: |
1 x 1/4" (overdrive, effect) |
FX Loop: |
Yes |
|
The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. Thatʼs where the SVT-3PRO comes in. Thereʼs a reason this amp is a best seller—it delivers the goods! With up to 450 watts and the sweet sound of tubes, the SVT-3PRO is the top choice of rockers and funkmeisters around the globe.
Itʼs all about tone. The SVT-3PROʼs Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices” for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if thatʼs not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel” for your show-stopping bass solo.
The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.
Power: | 450 Watts 4 Ohms, 275 Watts 8 Ohms | Channels: | 1 | Equalizer: | Tone Control 3-Band, Mid Tone 5-Position, Graphic EQ 9-Band | Inputs: | Bass, Power Amp In | Outputs: | Balanced Line Out, Neutrik Speakon Out, Preamp Out, Tuner Out | Controls: | Gain, Brightness, Bass, MidRange, Frequency, Treble, Master, Tube Gain, 9 Band EQ | Dimensions ( W x H x D ): | 48,26 x 10 x 39,37 cm | Weight: | 11.82 kg |
| The NEW YORK 122 NINJA Richard Bona signature cabinet has a very full yet focused sound, with controlled bottom end from the 2x12” Markbass custom speakers and fantastic clarity and detail from the special new 1.25” compression driver that delivers smooth and crisp highs that are never harsh or brittle. With its 800W power handling itʼs a great single cab choice for medium or large gigs, and its 8 Ω allows you to match two of them with our powerful Markbass heads like the new Little Mark Ninja or Bass Multiamp S. "I searched it, and I found it. Itʼs my sound and tone”, says Richard, "In the end It ALL come down to BASS Sound. Itʼs ALL in Markbass!” |
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10" Power Handling (RMS) 640W Impedance 4 Ohms Weight - 73 kgs Dimensions (mm) 675x1265x410
|
Ampegʼs Portaflex PF-500 bass head delivers a staggering 500W of power in an ultra-compact design providing pure Ampeg tone in an extremely portable package. Precise tone controls and gig-friendly input/output options provide ultimate flexibility. Pair it with our PF Series flip-top cabinets for the vintage styling and portability of Ampegʼs iconic Portaflex originals.
Power: | 500W RMS @ 4 ohms 5% THD | Channels: | 1 | Equalizer: | 3 band EQ | Inputs: | Bass Input, Audio Input, Power Amp In | Outputs: | Headphones Output, Speaker Output Speakon, Tuner Out, Preamp Out, XLR Line Out Jack | Controls: | Mute, -15db, Compression, Gain, Ultra Hi / Lo, 3 Band EQ, Frequency, FX mix, Volume | Dimensions ( W x H x D ): | 27.5 x 6.9 x 27.2 cm | Weight: | 3.5 kg |
| The world-renowned Classic Series Cabinets are synonymous with bass enclosures and the sound they are expected to produce. And because we know that players have different tastes, we make the configuration YOU are looking for. From the undeniable tone of the SVT-810E to the unexpected low end of the extended range SVT-410HLF, Ampeg enclosures have set the standard for decades. All enclosures feature dual Neutrik Speak-On(r) and 1/4' input/output jacks. Cabinets using high frequency horns contain a variable level attenuator. To prevent overpowering and damaging the horns, a resistive bulb is wired in series with the horn for protection. |
Reviews
There are no reviews yet.