The original Soundweb 9010 Programmable Controller set new standards in control interfacing to DSP systems, and has yet to be bettered as a simple yet powerful interface. The Soundweb London equivalent, the BLU-10, builds on that power and reputation by adding touch-screen control to make a more attractive and potentially cost-saving control solution. It is […]
The original Soundweb 9010 Programmable Controller set new standards in control interfacing to DSP systems, and has yet to be bettered as a simple yet powerful interface.
The Soundweb London equivalent, the BLU-10, builds on that power and reputation by adding touch-screen control to make a more attractive and potentially cost-saving control solution. It is possible that a BLU-10 could replace a more expensive proprietary touch screen solution where simpler control interfacing is required.
As with the Soundweb 9010, up to 100 control ʽpagesʼ of virtually any Soundweb London DSP parameter can be constructed, with the ability to create ʽfoldersʼ for nested pages. Access to specific pages or folders can be restricted with the used of password protection, so that only engineers or key employees can adjust critical system parameters.
Each page can hold up to eight different functions and with navigation being carried out entirely by a page list, all of these functions can be assigned to real parameters rather than functioning as page transitions.
Programming the BLU-10
Soundweb users will be familiar with the simple drag-and-drop programming interface, and the BLU-10 interface is very similar. Once the menu pages have been created, operation of the pages can be tested using the special simulation mode, which emulates how the controller will work when in use. This allows menu structures to be checked before the system goes live.
The BLU-10 connects into a Soundweb London network via its Ethernet port, either directly into the rear of a rackmount device such as the BLU-16 with a Cat 5 crossover cable or with a standard Cat 5 cable into an Ethernet switch. The unit is powered either using the terminals on the rear, accepting a range of 12V – 48V DC or with IEEE802.3af Power Over Ethernet (POE).
Mechanical Installation
The BLU-10 mounts in a standard US 3-gang wallbox (available from BSS Audio) using the screws provided with the unit.
Weight
0.50 kg
Reviews
There are no reviews yet.
Be the first to review “BSS BLU10 Programmable Touchscreen Controller” Cancel reply
The original Soundweb 9010 Programmable Controller set new standards in control interfacing to DSP systems, and has yet to be bettered as a simple yet powerful interface.
The Soundweb London equivalent, the BLU-10, builds on that power and reputation by adding touch-screen control to make a more attractive and potentially cost-saving control solution. It is possible that a BLU-10 could replace a more expensive proprietary touch screen solution where simpler control interfacing is required.
As with the Soundweb 9010, up to 100 control ʽpagesʼ of virtually any Soundweb London DSP parameter can be constructed, with the ability to create ʽfoldersʼ for nested pages. Access to specific pages or folders can be restricted with the used of password protection, so that only engineers or key employees can adjust critical system parameters.
Each page can hold up to eight different functions and with navigation being carried out entirely by a page list, all of these functions can be assigned to real parameters rather than functioning as page transitions.
Programming the BLU-10
Soundweb users will be familiar with the simple drag-and-drop programming interface, and the BLU-10 interface is very similar. Once the menu pages have been created, operation of the pages can be tested using the special simulation mode, which emulates how the controller will work when in use. This allows menu structures to be checked before the system goes live.
The BLU-10 connects into a Soundweb London network via its Ethernet port, either directly into the rear of a rackmount device such as the BLU-16 with a Cat 5 crossover cable or with a standard Cat 5 cable into an Ethernet switch. The unit is powered either using the terminals on the rear, accepting a range of 12V - 48V DC or with IEEE802.3af Power Over Ethernet (POE).
Mechanical Installation
The BLU-10 mounts in a standard US 3-gang wallbox (available from BSS Audio) using the screws provided with the unit.
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function
Four channel expander/gate
Number of Channels
4
Inputs
4 x XLR, 4 x TRS 1/4" phone
Output
4 x XLR, 4 x TRS 1/4" phone
Maximum Input Level
+21dBu
Compression Threshold
Not applicable
Compression Ratio
Not applicable
Attack Time
Not applicable
Release Time
Not applicable
Gate Threshold
0 to -80dB
Gate Rate
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable
Maximum Output Level
+21dBu
Make-up Gain
Not specified by manufacturer
Frequency Response
18HZ to 30kHz
Dynamic Range
Not specified by manufacturer
Noise
>95dBu, unweighted, 22Hz to 22kHz
Dimensions
1U rack mount, 8 1/2" deep
Specialties
Unit will operate at either +4dB or -10 dB
The Symphony I/O Chassis from Apogee provides two I/O Module slots for a variety of digital audio conversion options that form the interface side of the Symphony I/O. Elegant and easy to use, the front panel of Symphony I/O Chassis presents the visual feedback needed to monitor levels, sample rate and clock status, along with the controls required to adjust gain, output levels ,and select the Audio Interface Mode (AIM).
The rear panel provides access to the two I/O Module slots that are capable of a combined thirty-two channels of input and output. PCI, USB and Ethernet connectivity ensures complete compatibility with popular workstations, while the panel also includes Wordclock I/O connectors and termination, LoopSynch I/O connectors, and a quiet digitally-controlled fan to keep everything running cool.
The Audio Interface Mode (AIM) allows the system to be optimized for the most popular audio workstation environments, including Symphony PCI, Pro Tools HD PCI, USB audio, or to function as a standalone converter. With a two-step adjustment using a single front panel encoder knob, the interface can be easily switched back and forth between the preferred modes.
The optional five I/O Modules allow the user to choose from standard configurations, or customize the following - channel count, analog to digital input, digital to analog output, microphone preamps (requires an analog card) and digital I/O.
Two input/output module slots Ethernet connector USB 2.0 connector Two Symphony PC-32 ports for direct connection to Symphony 64 PCI card and Pro Tools core card Wordclock I/O and LoopSync I/O Wordclock termination switch Sixteen, 10-segment meters Two multi-function encoder knobs OLED GUI provides function selection and function adjustment and Audio Interface Mode (AIM) selection Two 1/4" headphone outputs 7-segment sample rate display Clock source display Meter source display High-performance, temperature controlled fan Connectors 2 x 1/4" TRS phone Headphone
2 x Symphony I/O PC-32 Ports
1 x Ethernet
1 x USB
2 x BNC Wordclock I/O
2 x BNC LoopSync I/O
Headphones THD+N: -105dB @ 19dBu
Dynamic Range: 119dB, A-weighted
Output Impedance: 30Ω
Power Requirements 90~240VAC, 50/60Hz, 150W
System Requirements Mac OS X 10.5.8 and above
Dimensions (WxDxH) 19 x 11.5 x 3.5" (483 x 292 x 89mm)
AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
Optional X-Video expansion card to provide master video sync generator
Realtime format conversion between all digital formats
Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
Three stage Termination Sensing for each word clock output
INPUTS
2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
S/PDIF optical on TOS-LINK 44.1-48k
S/PDIF coaxial on RCA 44.1-192k
ADAT 44.1-48k
ADAT/SMUX II for 88.2-96k
ADAT/SMUX IV for 176.4-192k
Word Clock BNC 44.1 –192k
Video
Optional video sync (X-Video card)
OUTPUTS
2 x AES-EBU on XLR single or double wide 44.1-192k
S/PDIF coaxial 44.1-192k
S/PDIF optical on TOS-LINK 44.1-48k
6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
ADAT
SMUX II
SMUX IV
Optional video sync (X-Video card)
SPECS
Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
Video: PAL/NTSC/60Hz
"SuperClock" (256fs)
Pull up/down 0.1% and 4% from any sample rate
Apogee´s new Ultra Low Jitter C777 clock
Three stage termination indicator (under/correct/over) on each
Word Clock output:
"SureLock" technology for drop out prevention
4 digit numeric true sample rate indication
Universal power: 15 W 90-250 VAC 50-60 HZ
Connection:
Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
Operating System:
Mac and Windows
An elegant slim-line device contains all the functions required by a system for distributing different musical programmes in homes for multi-room sound systems and commercial premises.
Three different musical programmes and one for paging can be transmitted in five mono zones, or alternatively four zones, one of which is in stereo. It is also possible to extend the number of zones to ten using a simple connector to interlink two systems. The system has five amplified 20 W / 4 ohm outputs. For each of the five zones, a direct auxiliary input is available for connecting sources such as CD players or mixers to be used exclusively for one zone/room.
The back-lit display and function keys make it possible to access all the menus for configuring and adjusting the system: Volume, Tone, Loudness, Output settings, VOX.
Features
3 Music Source Inputs individually selectable to each output
One Input Source with Override facility (Jukebox or Auto Announcer)
5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones
Can be expanded interlink of two or more MS520 units
Full Digital Matrix control of functions to all 5 zones
Up to 10 remote control panels RC 62 can be connected to each MS 520
AMPLIFIER SPECIFICATIONS
Power output:
5 x 20
Watt rms
Frequency Response (Music):
30 ÷ 45
Hz ÷ kHz
Frequency Response (Direct):
30 ÷ 45
Hz ÷ kHz
Frequency Response (Paging):
200 ÷ 18
Hz ÷ kHz
Distortion:
0.5
%
Signal / noise ratio (Music):
-78
dB
Signal / noise ratio (Direct):
-78
dB
Signal / noise ratio (Paging):
-60
dB
INPUT SECTION
Input sensitivity (Music):
-16
dBu
Input sensitivity (Direct):
-16
dBu
Input sensitivity (Paging - Line):
- 43 ÷ -27
dBu
Input sensitivity (Paging - Mic):
- 58 ÷ -41
dBu
Bass Tone:
(100 kHz) ± 8
dB
Treble Tone:
(12.5 kHz) ± 8
dB
OUTPUT SECTION
Out level:
-6 / -10
dB
Protections:
Short ciurcuit, thermal, AC / DC fuses
Power supply:
16
V dc
POWER REQUIREMENT
Operating voltage:
220÷240 / 110÷120 V ~ 50 / 60 Hz
V ~ Hz
Power (consumption):
370
W
Max. Available power:
100
W
PHISICAL SPECIFICATION
Width:
438 / 17.24
mm/inch
Height:
44 / 1.73
mm/inch
Depth:
253 / 9.96
mm/inch
Net Weight:
3.66 / 8.06
Kg/Lbs
SHIPPING INFORMATION
Package height:
75 / 2.95
mm/inch
Package width:
520 / 20.47
mm/inch
Package depth:
280 / 11.02
mm/inch
Shipping Weight:
4.18 / 9.21
Kg/Lbs
WDT 24 is a wireless transmitter in the operating free band ISM 2.4 GHz, which has been designed to work with the wireless receiver WDR 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
Wireless Digital Audio Transmitter System
Operating Band ISM 2.4GHz (free band).
One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
GFSK digital modulation/demodulation.
External antenna can help to increase the transmission distance.
Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
Automatic mute in bad channel quality conditions or high error code rate.
Transmission distance higher than 30 meters in open places.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.