| Content | The Yeti is the most advanced and versatile multi-pattern USB microphone available anywhere. Combining three capsules and four different pattern settings, the Yeti is the ultimate tool for creating amazing recordings, directly to your computer. THX Certified for exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in a USB microphone.
The Yeti features Blue's innovative triple capsule array, allowing for recording in stereo or your choice of three unique patterns, including cardioid, omnidirectional, and bidirectional, giving you recording capabilities usually requiring multiple microphones.
The Yeti utilizes a high quality analog-to-digital converter to send incredible audio fidelity directly into your computer, a built-in headphone amplifier for zero-latency monitoring, and simple controls for headphone volume, pattern selection, instant mute, and microphone gain located directly on the microphone.
The Yeti's exceptional performance and fidelity have earned it the distinction of being the first THX Certified Microphone, a validation of Yeti's incredibly low distortion, high fidelity, and balanced frequency response. There are no drivers to install — simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing.
Power Required/Consumption: 5V 150mA
Sample Rate: 48 kHz
Bit Rate: 16-bit
Capsules: 3 Blue-proprietary 14mm condenser capsules
Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
Frequency Response: 20Hz - 20kHz
Max SPL: 120dB (THD: 0.5% 1kHz)
Dimensions (extended in stand): 4.72" (12cm) x 4.92"(12.5cm) x 11.61"(29.5cm)
Weight (microphone): 1.2 lbs (.55 kg)
Weight (stand): 2.2 lbs (1 kg)
HEADPHONE AMPLIFIER
Impedance: 16 ohms
Power Output (RMS): 130 mW
THD: 0.009%
Frequency Response: 15 Hz - 22 kHz
Signal to Noise: 100dB
System Requirements
WINDOWS
Windows Vista, 7, 8 (or newer)
USB 1.1/2.0 (or newer)
64MB RAM (or better)
MACINTOSH
Mac OSX (10.4.11 or higher)
USB 1.1/2.0
64 MB RAM (minimum) |
Miniaturized USB condenser microphone for recording directly into a computer.
The USB12 is a miniaturized USB condenser microphone used for recording voice and acoustic instruments directly into a computer via the USB port. This mic is designed to naturally capture and reproduce vocals and instruments with stunning detail. The USB12 is clear, flexible, easy to use and has excellent sound response.
With a uniformly controlled cardioid polar pattern, the USB12 provides isolation and control at the sound source with a smooth, accurate response over a frequency range of 50 Hz - 16 kHz.
The USB12 supports both 44.1k and 48k sample rates for playback and recording. This high definition condenser microphone features a push-to-talk button, "steady on” or "momentary on” as well as a headphone jack for real time monitoring. The USB12 is also equipped with a bass roll-off filter to control unwanted low frequency signals.
The USB is also available in white, model USB12W. Supplied accessories include a 6' USB cable and external foam windscreen.
| Type | Pre-polarized Condenser |
|---|
| Polar Pattern | Cardioid | | Frequency Response | 50Hz - 16kHz | | Impedance | 1000 Ohms | | Sensitivity | @1k 1.3 mV/Pa |
|
- Element: Back electret condenser
- Element diameter: 14mm
- Frequency response: 20–17,000Hz
- Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
- Output: USB
- A-D converter: 48kHz / 16-bit sampling rate
- Output impedance: 100Ω ± 30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max. SPL: 132dB (at 1kHz <1% THD)
- Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
| High-Performance 2.4 GHz Digital Wireless System with 2 Handheld Microphones and Dual-Mode USB Receiver
-
- Package of 2 ULM200M handheld microphones and ULM200D dual-mode USB receiver
- High-quality microphone capsule for dedicated vocal applications
- Ultra-compact USB receiver with dual mode analog/digital audio interface
- Digital 2.4 GHz wireless connectivity offers superior sound quality
- Maximum range 120 m
- Automatic pairing for easy and intuitive setup
- Integrated volume up and down buttons on handheld microphone
- Panic mute feature on microphone
- Receiver powered via USB interface
- Auto-sensing of analog or USB digital audio connection
- 2.4 GHz ISM band operation allows license-free use on a worldwide basis
- 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
| The NT-USB Mini is a compact, studio-quality USB microphone designed for recording direct to a computer or tablet.
It is simple to set-up and use, and a smooth frequency response and directional pickup pattern make the NT-USB Mini perfect for recording vocals and instruments, livestreaming and gaming, podcasting, voice calls and more.
The included desk stand features a magnetic base that can be detached for easy mounting on mic stands or studio arms, and with its in-built pop filter and zero-latency headphone monitoring, the NT-USB Mini delivers crisp, clear audio in all recording applications.
Acoustic Principle: Pressure gradient Active Electronics: Electret condenser, A/D and USB interface Polar Pattern: Cardioid
Frequency Range: 20 Hz – 20 kHz
Input SPL @ 1%THD: 121dB (A-weighted, as per IEC651) Sample Rate: 48 kHz
Bus Powered: Yes
Bit Depth: 24-bit Analog Output: 3.5mm headphone
Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
Output Connection: USB-C OS Requirements: macOS 10.12 / Windows 10
Weight (grams): 585
Dimensions (millimetres): Height: 141.9 Width: 54.5 Diameter (base): 89.3
• Studio-quality microphone with U SB-C connectivity
• 3.5mm headphone output with zero-latency monitoring
• Easy set-up, plug in and play
• Detachable magnetic desk stand
• In-built pop ? lte
| Polar Chart: |
Cardioid |
| USB compatibility: |
Yes |
| Optimised for podcasters, gamers, streamers and home recording applications
Three integrated 14 mm capsules
Switchable polar pattern: omnidirectional, figure-eight, cardioid, stereo
Frequency range: 20 - 20,000 Hz
Max. SPL: 120 dB
AD-converter: 48/44.1 kHz / 16-bit
Gain +17 dB
Mute button
Volume control
Headphone jack: 3.5 mm mini jack
Mini-B USB connector
Plug & Play compatible with Windows 10 (64-bit) and Mac OSX 10.10 or higher
5/8" Thread for mounting on standard microphone stands
Dimensions (H x W x D): 227 x 110 x 110 mm
Weight: 1.7 kg
Includes table stand and USB cable |
Reviews
There are no reviews yet.