The Yeti is the most advanced and versatile multi-pattern USB microphone available anywhere. Combining three capsules and four different pattern settings, the Yeti is the ultimate tool for creating amazing recordings, directly to your computer. THX Certified for exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in […]
The Yeti is the most advanced and versatile multi-pattern USB microphone available anywhere. Combining three capsules and four different pattern settings, the Yeti is the ultimate tool for creating amazing recordings, directly to your computer. THX Certified for exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in a USB microphone.
The Yeti features Blue’s innovative triple capsule array, allowing for recording in stereo or your choice of three unique patterns, including cardioid, omnidirectional, and bidirectional, giving you recording capabilities usually requiring multiple microphones.
The Yeti utilizes a high quality analog-to-digital converter to send incredible audio fidelity directly into your computer, a built-in headphone amplifier for zero-latency monitoring, and simple controls for headphone volume, pattern selection, instant mute, and microphone gain located directly on the microphone.
The Yeti’s exceptional performance and fidelity have earned it the distinction of being the first THX Certified Microphone, a validation of Yeti’s incredibly low distortion, high fidelity, and balanced frequency response. There are no drivers to install — simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing.
Power Required/Consumption: 5V 150mA
Sample Rate: 48 kHz
Bit Rate: 16-bit
Capsules: 3 Blue-proprietary 14mm condenser capsules
Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
Frequency Response: 20Hz – 20kHz
Max SPL: 120dB (THD: 0.5% 1kHz)
Dimensions (extended in stand): 4.72″ (12cm) x 4.92″(12.5cm) x 11.61″(29.5cm)
Weight (microphone): 1.2 lbs (.55 kg)
Weight (stand): 2.2 lbs (1 kg)
HEADPHONE AMPLIFIER
Impedance: 16 ohms
Power Output (RMS): 130 mW
THD: 0.009%
Frequency Response: 15 Hz – 22 kHz
Signal to Noise: 100dB
System Requirements
WINDOWS
Windows Vista, 7, 8 (or newer)
USB 1.1/2.0 (or newer)
64MB RAM (or better)
MACINTOSH
Mac OSX (10.4.11 or higher)
USB 1.1/2.0
64 MB RAM (minimum)
Weight
1.00 kg
Reviews
There are no reviews yet.
Be the first to review “Blue Microphones Yeti Blackout Multi-Pattern USB microphone” Cancel reply
The ATR4650-USB is a small condenser boundary microphone that is convenient for podcasting, video- and teleconferencing, and casual recording applications, such as meetings, conversations, and note-taking.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
Content
The Yeti is the most advanced and versatile multi-pattern USB microphone available anywhere. Combining three capsules and four different pattern settings, the Yeti is the ultimate tool for creating amazing recordings, directly to your computer. THX Certified for exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in a USB microphone.
The Yeti features Blue's innovative triple capsule array, allowing for recording in stereo or your choice of three unique patterns, including cardioid, omnidirectional, and bidirectional, giving you recording capabilities usually requiring multiple microphones.
The Yeti utilizes a high quality analog-to-digital converter to send incredible audio fidelity directly into your computer, a built-in headphone amplifier for zero-latency monitoring, and simple controls for headphone volume, pattern selection, instant mute, and microphone gain located directly on the microphone.
The Yeti's exceptional performance and fidelity have earned it the distinction of being the first THX Certified Microphone, a validation of Yeti's incredibly low distortion, high fidelity, and balanced frequency response. There are no drivers to install — simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing.
Power Required/Consumption: 5V 150mA
Sample Rate: 48 kHz
Bit Rate: 16-bit
Capsules: 3 Blue-proprietary 14mm condenser capsules
Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
Frequency Response: 20Hz - 20kHz
Max SPL: 120dB (THD: 0.5% 1kHz)
Dimensions (extended in stand): 4.72" (12cm) x 4.92"(12.5cm) x 11.61"(29.5cm)
Weight (microphone): 1.2 lbs (.55 kg)
Weight (stand): 2.2 lbs (1 kg)
HEADPHONE AMPLIFIER
Impedance: 16 ohms
Power Output (RMS): 130 mW
THD: 0.009%
Frequency Response: 15 Hz - 22 kHz
Signal to Noise: 100dB
System Requirements
WINDOWS
Windows Vista, 7, 8 (or newer)
USB 1.1/2.0 (or newer)
64MB RAM (or better)
MACINTOSH
Mac OSX (10.4.11 or higher)
USB 1.1/2.0
64 MB RAM (minimum)
The NT-USB Mini is a compact, studio-quality USB microphone designed for recording direct to a computer or tablet.
It is simple to set-up and use, and a smooth frequency response and directional pickup pattern make the NT-USB Mini perfect for recording vocals and instruments, livestreaming and gaming, podcasting, voice calls and more.
The included desk stand features a magnetic base that can be detached for easy mounting on mic stands or studio arms, and with its in-built pop filter and zero-latency headphone monitoring, the NT-USB Mini delivers crisp, clear audio in all recording applications.
Acoustic Principle: Pressure gradient Active Electronics: Electret condenser, A/D and USB interface Polar Pattern: Cardioid
Frequency Range: 20 Hz – 20 kHz
Input SPL @ 1%THD: 121dB (A-weighted, as per IEC651) Sample Rate: 48 kHz
Bus Powered: Yes
Bit Depth: 24-bit Analog Output: 3.5mm headphone
Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
Output Connection: USB-C OS Requirements: macOS 10.12 / Windows 10
Weight (grams): 585
Dimensions (millimetres): Height: 141.9 Width: 54.5 Diameter (base): 89.3
• Studio-quality microphone with U SB-C connectivity
• 3.5mm headphone output with zero-latency monitoring
• Easy set-up, plug in and play
• Detachable magnetic desk stand
• In-built pop ? lte
Polar Chart:
Cardioid
USB compatibility:
Yes
The Audio-Technica Consumer ATR4650-USB is a compact USB microphone that can be clipped on clothing or mounted to a surface such as a monitor frame making it ideal for vloggers, YouTubers, and live streamers. With its USB Type-C cable and USB Type-A adapter, it conveniently works with USB-equipped smartphones, tablets, and computers.
Operation is simple and straightforward thanks to its plug-and-play compatibility and USB powering. The 6' attached cable allows plenty of slack for you to maintain sufficient distance between the mic and your device. The condenser element's omnidirectional polar pattern picks up sound from all directions, so you don't have to worry about precisely angling the mic.
Utility USB microphone for computer applications
Easily portable boundary mic plugs into USB input on a computer, tablet, smartphone or other device
1.8 m (6') cable is terminated with USB-C connector, and comes with USB-C to USB-A adapter
Slim-profile mount for easy attachment to flat-panel monitor or other surface
Integral clothing clip enables use as a lapel microphone
Omnidirectional pickup pattern offers full 360° coverage
MicrophoneElement : Condenser
Polar Pattern : Omnidirectional
Freq response : 50 - 13,000 Hz
Open circuit sensitivity : -48 dB
Power Requirement : 5v DC
SUM40 USB condenser microphone
Uses: Music recording, voice-over, podcasting
Capsule: Condenser
Polar pattern: Cardioid
Sensitivity: - 53 dB +/- 3 dB
Frequency response: 50 Hz to 18 kHz
Maximum sound pressure level: 75 dB
Compatibility: Windows and Mac OS X, without additional driver
Connector: Type B USB
Headphone output: 3.5 mm (1/8“) mini jack
Colour: Black
This USB back electret condenser microphone is perfect for musicians needing to record vocals and instruments alike. This clear and precise sounding mic features smooth frequency response.
Polar Chart:Cardioid
The TM-250U is the USB condenser microphone for personal broadcasting and online communication. Because it captures crisp, accurate sound at an ultra-affordable price, and also includes a headphones output for monitoring, it is the ideal solution for podcasting, conferencing, computer recording and internet broadcasting.
Lightweight and Small – for Perfect Audio Quality With Direct-to-Computer Connectivity
The TM-250U was designed to deliver flawless, detailed audio straight to your computer via USB. Simply select it for audio input and output in your operating system, connect your headphones, and off you go. Record voice-over or music directly to your audio software, use it for online conferences and meetings, create podcasts, stream live with pristine vocal quality, or any other situation where crisp clear audio is needed.
Adaptability To All Common Operating Systems
The TASCAM TM-250U works via industry-standard USB-C connectors on Windows, Mac, iOS, Android* and Chrome OS* platforms, with driverless functionality returning stream-optimized audio at 16-bit/48kHz.
* Operation of this unit was confirmed using standard devices, however this does not guarantee operation with all devices with Android and Chrome OS.
Built-in Controls For Gain, Mute and Headphones Volume
The TM-250U computer broadcast microphone provides all the control for the microphone and monitoring on the unit itself. Microphone gain control and headphones output with volume control are easily accessible. A Mic-Mute button gives additional flexibility for in-the-moment control of audio.
Everything Included to Broadcast or Record Right Away
Included are essential microphone accessories: a mic holder, USB C-A cable (2 m), and desktop tripod – allowing you to set up on your desktop immediately.
Tascam TM-250U: Frequency response and polar diagram (at 1 kHz)
Features at a glance
USB condenser microphone with headphones output for direct monitoring
Ideal for video conferencing, podcasting or recording of acoustic instruments, vocals or speech with a computer
Simple connection with a Windows, macOS, iOS, Android* or Chrome OS* device using the included USB cable
* Dependent on hardware/processor. Operation with all devices is not guaranteed.
No driver is necessary (USB Audio Class 1.0)
Audio processing at 16 bit and up to 48 kHz sampling rate
High SPL (sound pressure level) capability and smooth frequency curve
Supercardioid directional pattern is ideal to capture single sound sources and is less sensitive to ambient noise
Headphones output (3-contact mini stereo jack) enables direct monitoring of the audio returned from the computer
Headphones volume control
Microphone volume (gain) control
Mute button
Sturdy metal body
Included accessories: USB cable (Type C – Type A, 2 m), mic holder (screw diameter 5/8 inch), tabletop mic stand
Windows
Windows 10 (October 2020, Version 20H2)
Windows 10 (May 2020 Update 2004)
Windows 10 (November 2019 Update 1909)
Windows 8.1
Windows 7
Mac
macOS Big Sur (11.0)
macOS Catalina (10.15)
macOS Mojave (10.14)
macOS High Sierra (10.13)
Transducer
High-quality condenser capsule
Directional pattern
Supercardioid
USB connector
USB Type C receptacle
Frequency response
20 Hz – 20 kHz
Sensitivity
−32 dB (0 dB ＝ 1 V/Pa at 1 kHz)
Maximum permissible SPL
130 dB (at 1 kHz = 1% THD)
Quantization bit depth
16-bit
Sampling frequencies
44.1 kHz, 48 kHz
ADC performance
Distortion (THD+N)
0.01%
S/N ratio
89 dB
Dynamic range
89 dB
DAC performance
Distortion (THD+N)
0.005%
S/N ratio
96 dB
Dynamic range
93 dB
Power supply and other specifications
Power supply
DC 5 V via USB connection
External dimensions (Ø × L)
65 mm × 204 mm
Weight
439 g (microphone only)
Permissible operating temperature range
5–35 °C
Element: Back electret condenser
Element diameter: 14mm
Frequency response: 20–17,000Hz
Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
Output: USB
A-D converter: 48kHz / 16-bit sampling rate
Output impedance: 100Ω ± 30% (at 1kHz)
Load impedance: >1kΩ
Self noise: 16dBA
Max. SPL: 132dB (at 1kHz <1% THD)
Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.