Content |
The Yeti is one of the most advanced and versatile multi-pattern USB microphones available anywhere. Combining three capsules and four different pattern settings, the Yeti is an ultimate tool for creating amazing recordings, directly to your computer. With exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in a USB microphone.
The Yeti features Blue's innovative triple capsule array, allowing for recording in stereo or your choice of three unique patterns, including cardioid, omnidirectional, and bidirectional, giving you recording capabilities usually requiring multiple microphones.
The Yeti utilizes a high quality analog-to-digital converter to send incredible audio fidelity directly into your computer, a built-in headphone amplifier for zero-latency monitoring, and simple controls for headphone volume, pattern selection, instant mute, and microphone gain located directly on the microphone. There are no drivers to install - simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing.
MICROPHONE AND PERFORMANCE
Power Required/Consumption: 5V 150mA
Sample Rate: 48 kHz
Bit Rate: 16bit
Capsules: 3 Blue-proprietary 14mm condenser capsules
Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
Frequency Response: 20Hz - 20kHz
Max SPL: 120dB (THD: 0.5% 1kHz)
Headphone Amplifier
Impedance:16 ohms
Power Output (RMS): 130 mW
THD: 0.009%
Frequency Response: 15 Hz - 22 kHz
Signal to Noise: 100dB
Specifications
Dimensions (extended in stand): 4.72" (12cm) x 4.92“(12.5cm) x 11.61“(29.5cm)
Weight (microphone): 1.2 lbs (.55 kg)
Weight (stand): 2.2 lbs (1 kg)
System Requirements
PC: Windows 8, Windows 7, Windows Vista, XP Home Edition or XP Professional
USB 1.1/2.0; 64 MB RAM (minimum)
Macintosh: Mac OSX ( 10.4.11 or higher )
USB 1.1/2.0
64 MB RAM (minimum)
| The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
- Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
| STUDIO CONDENSER MICROPHONE C-1U
Studio Condenser Microphone with USB Audio Interface and software suite
Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
Plug this amazing USB-mic straight into your computer and turn your PC or Mac computer into a recording system without the need for any other hardware
Directly works with your PC or Mac computer—ultra-low latency ASIO and WDM drivers for PC audio optimization included
Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Pressure-gradient transducer with shock-mounted capsule
- Professional large-diaphragm condenser microphone with built-in 48 kHz USB interface for unsurpassed audio quality
- Gets phantom power directly from PC USB output
- Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software
- Maximum SPL (sound pressure level) of 136 dB
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Ultra-rugged construction with die-cast body
- USB connector and swivel stand mount included
|
- Element: Back electret condenser
- Element diameter: 14mm
- Frequency response: 20–17,000Hz
- Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
- Output: USB
- A-D converter: 48kHz / 16-bit sampling rate
- Output impedance: 100Ω ± 30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max. SPL: 132dB (at 1kHz <1% THD)
- Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
|
Reloop SPodcaster Condenser Microphone USB. Suitable for any type of broadcasting via computer, as connected directly to your PC or Mac without requiring a sound card with high-speed USB 2.0, all connections are as easy as ever. It features a condenser capsule offers us high quality recording.
Sensitivity: -65 ± 5 dB @ 1 kHz
S / N ratio: -59 dB
Frequency range: 50 Hz - 18 kHz
Connection: USB
Dimensions: 148 x 65 x 56 mm
Weight: 0.35 kg
Includes USB cable, table stand and software | The Marantz Professional M4U is an electret condenser microphone system designed to be used with a personal computer. The system incorporates a USB A/D converter with a headphone output so the user can monitor the microphone pickup in real time without latency. Perfect for podcasting, live streaming, interviews or any computer application requiring a microphone.
|
Reviews
There are no reviews yet.