| Content | The Yeti is one of the most advanced and versatile multi-pattern USB microphones available anywhere. Combining three capsules and four different pattern settings, the Yeti is an ultimate tool for creating amazing recordings, directly to your computer. With exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in a USB microphone.
The Yeti features Blue's innovative triple capsule array, allowing for recording in stereo or your choice of three unique patterns, including cardioid, omnidirectional, and bidirectional, giving you recording capabilities usually requiring multiple microphones.
The Yeti utilizes a high quality analog-to-digital converter to send incredible audio fidelity directly into your computer, a built-in headphone amplifier for zero-latency monitoring, and simple controls for headphone volume, pattern selection, instant mute, and microphone gain located directly on the microphone. There are no drivers to install - simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing.
Microphone and Performance
Power Required/Consumption: 5V 150mA
Sample Rate: 48 kHz
Bit Rate: 16bit
Capsules: 3 Blue-proprietary 14mm condenser capsules
Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
Frequency Response: 20Hz - 20kHz
Max SPL: 120dB (THD: 0.5% 1kHz)
Headphone Amplifier
Impedance:16 ohms
Power Output (RMS): 130 mW
THD: 0.009%
Frequency Response: 15 Hz - 22 kHz
Signal to Noise: 100dB
Specifications
Dimensions (extended in stand): 4.72" (12cm) x 4.92“(12.5cm) x 11.61“(29.5cm)
Weight (microphone): 1.2 lbs (.55 kg)
Weight (stand): 2.2 lbs (1 kg)
System Requirements
PC: Windows 8, Windows 7, Windows Vista, XP Home Edition or XP Professional
USB 1.1/2.0; 64 MB RAM (minimum)
Macintosh: Mac OSX ( 10.4.11 or higher )
USB 1.1/2.0
64 MB RAM (minimum) | Equipped with a USB output, the AT2020USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The microphone offers the critically acclaimed, award-winning sound of the AT2020, with studio-quality articulation and intelligibility perfect for singer/songwriters, podcasters, voice-over artists, field recorders, and home studio recorders.
The AT2020USB+ features a built-in headphone jack with volume control that allows you to directly monitor your microphone signal with no delay. It also offers mix control that blends microphone and pre-recorded audio. The microphoneʼs cardioid pickup pattern delivers excellent off-axis rejection, while its A/D converter with a 16-bit, 44.1/48 kHz sampling rate ensures extremely articulate sound reproduction.
Audio-Technicaʼs state-of-the-art design and manufacturing techniques ensure that the microphone complies with the companyʼs renowned consistency and reliability standards.
-
- Condenser microphone with USB output for digital recording
-
- High quality A/D converter with 16 bit, 44.1/48 kHz sampling rate for superb audio
-
- Headphone jack with volume control allows you to monitor the microphone signal with no delay
-
- Mix control allows you to blend your microphone signal and pre-recorded audio
-
- High-output internal headphone amplifier delivers superior clarity and musical detail as well as more volume overall
-
- Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording and voiceover use
-
- Compatible with Windows 7, Vista, XP, 2000 and Mac OS X
- Tripod desk stand with folding legs for secure and easily portable tabletop use
| ELEMENT |
Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN |
Cardioid |
| FREQUENCY RESPONSE |
20 – 20,000 Hz |
| POWER REQUIREMENTS |
USB Power (5V DC) |
| BIT DEPTH |
16 bit |
| SAMPLE RATE |
44.1/48 kHz |
| VOLUME CONTROL |
Mix control;
Headphone volume control |
| WEIGHT |
386 g (13.6 oz) |
| DIMENSIONS |
162.0 mm (6.38“) long,
52.0 mm (2.05“) maximum body diameter |
| OUTPUT CONNECTOR |
USB-type |
| HEADPHONE OUTPUT POWER |
130 mW (at 1 kHz, 10% T.H.D., 32 ohm load) |
| HEADPHONE JACK |
3.5 mm (1/8“) TRS (stereo) |
| ACCESSORIES FURNISHED |
Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable |
| The new AT2020 USB offers studio-quality articulation and intelligibility. It plugs right into your computer's USB port, and functions seamlessly with your favorite recording software. Equipped with a USB digital output, the AT2020 USB is perfect for home studio recording, field recording, podcasting, and voiceover use.
Based on the renowned AT2020
The AT2020 USB is based on the design of Audio-Technica's critically acclaimed AT2020 cardioid condenser microphone. Like the AT2020, it features a low-mass diaphragm, custom-engineered for extended frequency response and superior transient response.
With low self-noise, the AT2020 USB is perfectly suited for sophisticated digital recording equipment. Audio-Technica's state-of-the-art design and manufacturing techniques ensure that the microphone complies with the company's renowned consistency and reliability standards.
Experience AT2020 USB. Plug it in and transform your sound.
- Side-address studio condenser with USB digital output (Windows and Mac compatible)
- Crystal-clear, natural sound for podcasting, home studio recording, field recording, and voiceover use
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Low self-noise - perfectly suited for sophisticated digital recording equipment
- Includes tripod desk stand, pivoting stand mount, USB cable & storage pouch
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-16,000 Hz
- Weight: 13.2 oz (374 g)
- Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
- Output Connector: USB-type
- Accessories: Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable
| The Marantz Professional M4U is an electret condenser microphone system designed to be used with a personal computer. The system incorporates a USB A/D converter with a headphone output so the user can monitor the microphone pickup in real time without latency. Perfect for podcasting, live streaming, interviews or any computer application requiring a microphone.
|
Combining high-resolution audio with increased connectivity options, the AT2020USBi cardioid condenser microphone adds a new level of sound-quality and convenience to the expanding lineup of Audio-Technica USB microphones. Modeled after the critically acclaimed AT2020, this digital output mic features an A/D converter with a 24-bit/96 kHz sampling rate to deliver high-resolution articulation and intelligibility thatʼs perfect for home studio recording, field recording, podcasting and voiceover use.
The AT2020USBi works with both USB and Lightning cables (included), so you can use it straight from the box to digitally capture audio on the device of your choice: PC, Mac or lightning equipped iOS device. The integrated gain control adds to the convenience, allowing you to adjust the input level directly on the microphone.
The AT2020USBi cardioid condenser microphone brings state-of-the-art sound for the on-the-go lifestyle to the family of Audio-Technica USB mics.
- Condenser microphone with digital output for convenient, high-resolution recording
- High-quality A/D converter with 24-bit/96 kHz sampling rate for superb, high-resolution audio
- Mic gain control allows you to adjust input level on the mic itself
- Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording and voiceover use
- Compatible with Windows 7 and above, Mac OS 10.6 and above, and iOS 7.02 and above (requires Lightning connector).
- Tripod desk stand with folding legs for secure and easily portable tabletop use
- Included USB and Lightning cables provide ready connectivity to computers and iOS devices
| ELEMENT | Fixed-charge back plate, permanently polarized condenser | | POLAR PATTERN | Cardioid | | FREQUENCY RESPONSE | 20 – 20,000 Hz | | POWER REQUIREMENTS | USB (5V DC); Lightning (3.3V DC) | | BIT DEPTH | 24 bit | | SAMPLE RATE | Up to 96 kHz | | VOLUME CONTROL | Mic gain control | | WEIGHT | 350 g (12.3 oz) | | DIMENSIONS | 162.0 mm (6.38“) long, 52.0 mm (2.05“) maximum body diameter | | OUTPUT CONNECTOR | Micro-HDMI | | ACCESSORIES FURNISHED | Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 4.9' (1.5 m) USB cable; 4.9' (1.5 m) Lightning cable |
|
The sE X1 USB combines the hugely popular sE X1 large-diaphragm condenser microphone with high-quality USB technology to provide a professional studio microphone for use anywhere!
The sE X1 USB offers the same great performance as the original sE X1, but with the added convenience of plugging straight into a USB port on a PC or Mac, negating the need for an audio interface or external power supply. The sE X1 USB features a cardioid polar pattern with a bass cut and a -10dB pad, and it ships with a mic clip as standard.
The sE X1 USB is fitted with a USB 2.0 connection and is fully USB 3.0 compatible. As with the rest of the sE X1 range, the sE X1 USB has been treated with a Matte Black finish, meaning the microphone can easily blend into the background on stage or during video recordings. The X1 USB is compatible with the sE Isolation Pack.
- Directional pattern: Cardioid
- Frequency range: 20Hz - 20kHz
- Sensitivity: -27dBV (mV/Pa)
- Equivalent noise level: 19.8 dB
|
Reviews
There are no reviews yet.