Content | The Yeti is the most advanced and versatile multi-pattern USB microphone available anywhere. Combining three capsules and four different pattern settings, the Yeti is the ultimate tool for creating amazing recordings, directly to your computer. THX Certified for exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in a USB microphone.
The Yeti features Blue\'s innovative triple capsule array, allowing for recording in stereo or your choice of three unique patterns, including cardioid, omnidirectional, and bidirectional, giving you recording capabilities usually requiring multiple microphones.
The Yeti utilizes a high quality analog-to-digital converter to send incredible audio fidelity directly into your computer, a built-in headphone amplifier for zero-latency monitoring, and simple controls for headphone volume, pattern selection, instant mute, and microphone gain located directly on the microphone.
The Yeti\'s exceptional performance and fidelity have earned it the distinction of being the first THX Certified Microphone, a validation of Yeti\'s incredibly low distortion, high fidelity, and balanced frequency response. There are no drivers to install — simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing.
Primary Applications Podcast
Form Factor Desktop / Stand/Boom Mount
Intended Sound Sources Vocals
Sound Field Mono, Stereo
Diaphragm 0.55" / 14 mm
Polar Pattern Cardioid, Figure-8, Omnidirectional
Pattern Selection Switched
Orientation Side Address
High-Pass Filter Yes
On-Board Controls Headphone Volume
Frequency Range 20 Hz to 20 kHz
Maximum SPL 120 dB SPL
THD 0.5%
Output Connectors (Digital) 1 x USB (Type Unspecified)
Headphone Connector 1 x 1/8" / 3.5 mm
A/D Conversion 16-Bit
Sample Rate 48 kHz
Operating System Support Windows, macOS/OS X
RAM Requirement 64 MB Minimum
Available Port USB (Interface Unspecified)
Bus Power USB
Operating Voltage Not Specified by Manufacturer
Mounting 5/8"-27 Female (via Integrated Hardware)
Desktop Stand (with Included Hardware)
Dimensions ø: 4.72 x W: 4.92 x L: 11.61" / ø: 11.99 x W: 12.5 x L: 29.49 cm
Weight 2.2 lb / 1 kg
Package Weight 3.715 lb
Box Dimensions (LxWxH) 11.45 x 6.4 x 5.5" | Uber Mic is the perfect set-up for all your recording needs—whether it’s recording acoustic instruments & vocals, capturing pristine audio for podcasts & broadcasting, or simply bringing your gaming experience to the next level. Uber Mic does it all – start recording, streaming & broadcasting now!
• Cardioid – a directional pattern, perfect for capturing singular sound sources while eliminating unwanted room reflections and background noise
• Omnidirectional – equal output/sensitivity at all angles captures your sound sources from all directions, perfect for adding some ambience to your recordings or capturing a group of sound sources
• Figure 8 - equal output/sensitivity on two sides of the microphone, ideal for capturing two independent sound sources simultaneously
• Stereo – picks up from the left and right side of the microphone, producing a true stereo image
Features
- Easy, intuitive operation for any application
- Wide-range 30–20,000Hz frequency response delivers detailed, natural sound
- 3-capsule condenser microphone element, including single-point stereo
- 4 selectable polar patterns to customize your ideal recording
- Polar patterns: cardioid, figure-8, omnidirectional, and stereo
- 1/8” headphone jack and internal headphone amplifier
- USB/direct mixing control with mic volume control enables zero-latency recording and monitoring
- Microphone mute control ensures privacy
- LCD display shows polar pattern and currently selected control level
- Studio-quality recording and playback for accurate reproduction
- Convenient desktop mounting with threaded insert for optional stand-mounting
- Integrated stand fits easily into any setup
- iOS compatibility using the Apple iPad Camera Connection Kit (sold separately)
Specifications
- Microphone:
- Type: 3-capsule condenser USB microphone
- Capsule Size: 16mm
- Polar Patterns: Figure 8, cardioid, omni, and stereo
- Frequency Response: 30 Hz - 20 KHz
- Sensitivity: -45 dB (0 dB = 1V/Pa @ 1 kHz)
- SNR: 110 dB
- Maximum SPL: 120 dB (THD
|
Miniaturized USB condenser microphone for recording directly into a computer.
The USB12 is a miniaturized USB condenser microphone used for recording voice and acoustic instruments directly into a computer via the USB port. This mic is designed to naturally capture and reproduce vocals and instruments with stunning detail. The USB12 is clear, flexible, easy to use and has excellent sound response.
With a uniformly controlled cardioid polar pattern, the USB12 provides isolation and control at the sound source with a smooth, accurate response over a frequency range of 50 Hz - 16 kHz.
The USB12 supports both 44.1k and 48k sample rates for playback and recording. This high definition condenser microphone features a push-to-talk button, "steady on” or "momentary on” as well as a headphone jack for real time monitoring. The USB12 is also equipped with a bass roll-off filter to control unwanted low frequency signals.
The USB is also available in white, model USB12W. Supplied accessories include a 6' USB cable and external foam windscreen.
Type | Pre-polarized Condenser | Polar Pattern | Cardioid | Frequency Response | 50Hz - 16kHz | Impedance | 1000 Ohms | Sensitivity | @1k 1.3 mV/Pa |
| Equipped with a USB output, the AT2020USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The microphone offers the critically acclaimed, award-winning sound of the AT2020, with studio-quality articulation and intelligibility perfect for singer/songwriters, podcasters, voice-over artists, field recorders, and home studio recorders.
The AT2020USB+ features a built-in headphone jack with volume control that allows you to directly monitor your microphone signal with no delay. It also offers mix control that blends microphone and pre-recorded audio. The microphoneʼs cardioid pickup pattern delivers excellent off-axis rejection, while its A/D converter with a 16-bit, 44.1/48 kHz sampling rate ensures extremely articulate sound reproduction.
Audio-Technicaʼs state-of-the-art design and manufacturing techniques ensure that the microphone complies with the companyʼs renowned consistency and reliability standards.
-
- Condenser microphone with USB output for digital recording
-
- High quality A/D converter with 16 bit, 44.1/48 kHz sampling rate for superb audio
-
- Headphone jack with volume control allows you to monitor the microphone signal with no delay
-
- Mix control allows you to blend your microphone signal and pre-recorded audio
-
- High-output internal headphone amplifier delivers superior clarity and musical detail as well as more volume overall
-
- Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording and voiceover use
-
- Compatible with Windows 7, Vista, XP, 2000 and Mac OS X
- Tripod desk stand with folding legs for secure and easily portable tabletop use
ELEMENT |
Fixed-charge back plate, permanently polarized condenser |
POLAR PATTERN |
Cardioid |
FREQUENCY RESPONSE |
20 – 20,000 Hz |
POWER REQUIREMENTS |
USB Power (5V DC) |
BIT DEPTH |
16 bit |
SAMPLE RATE |
44.1/48 kHz |
VOLUME CONTROL |
Mix control;
Headphone volume control |
WEIGHT |
386 g (13.6 oz) |
DIMENSIONS |
162.0 mm (6.38“) long,
52.0 mm (2.05“) maximum body diameter |
OUTPUT CONNECTOR |
USB-type |
HEADPHONE OUTPUT POWER |
130 mW (at 1 kHz, 10% T.H.D., 32 ohm load) |
HEADPHONE JACK |
3.5 mm (1/8“) TRS (stereo) |
ACCESSORIES FURNISHED |
Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable |
| Optimised for podcasters, gamers, streamers and home recording applications
Three integrated 14 mm capsules
Switchable polar pattern: omnidirectional, figure-eight, cardioid, stereo
Frequency range: 20 - 20,000 Hz
Max. SPL: 120 dB
AD-converter: 48/44.1 kHz / 16-bit
Gain +17 dB
Mute button
Volume control
Headphone jack: 3.5 mm mini jack
Mini-B USB connector
Plug & Play compatible with Windows 10 (64-bit) and Mac OSX 10.10 or higher
5/8" Thread for mounting on standard microphone stands
Dimensions (H x W x D): 227 x 110 x 110 mm
Weight: 1.7 kg
Includes table stand and USB cable | The NT-USB Mini is a compact, studio-quality USB microphone designed for recording direct to a computer or tablet.
It is simple to set-up and use, and a smooth frequency response and directional pickup pattern make the NT-USB Mini perfect for recording vocals and instruments, livestreaming and gaming, podcasting, voice calls and more.
The included desk stand features a magnetic base that can be detached for easy mounting on mic stands or studio arms, and with its in-built pop filter and zero-latency headphone monitoring, the NT-USB Mini delivers crisp, clear audio in all recording applications.
Acoustic Principle: Pressure gradient Active Electronics: Electret condenser, A/D and USB interface Polar Pattern: Cardioid
Frequency Range: 20 Hz – 20 kHz
Input SPL @ 1%THD: 121dB (A-weighted, as per IEC651) Sample Rate: 48 kHz
Bus Powered: Yes
Bit Depth: 24-bit Analog Output: 3.5mm headphone
Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
Output Connection: USB-C OS Requirements: macOS 10.12 / Windows 10
Weight (grams): 585
Dimensions (millimetres): Height: 141.9 Width: 54.5 Diameter (base): 89.3
• Studio-quality microphone with U SB-C connectivity
• 3.5mm headphone output with zero-latency monitoring
• Easy set-up, plug in and play
• Detachable magnetic desk stand
• In-built pop ? lte
Polar Chart: |
Cardioid |
USB compatibility: |
Yes |
|
Reviews
There are no reviews yet.