Content | High-end portable Sound system, 700W, 15"
Bluetooth receiver
2x UHF Wireless Microphones
SD card reader, USB stick and IR remote control
SD card reader, USB stick and IR remote control |
|
2 handheld microphones |
UHF AA 1.5V LR06 x2 batteries |
Bluetooth receiver |
|
LF |
15" |
HF |
1" |
RMS power |
350W |
MAX power |
700W |
Bandwidth |
40Hz - 20KHz |
SPL Max |
126dB |
Power supply |
integrated battery, or external battery (12V) |
2 wired microphone in 6.35mm Jack |
Volume - Echo effects |
+/- 12dB microphones bass |
treble microphones +/- 12dB |
Voice priority function |
|
Dimension |
505x435x765 |
Net weight |
20,05 |
Power supply |
230v AC 50 / 60Hz |
Autonomy |
6-8 hours |
Wireless microphone frequency |
650 and 666 MHz |
|
Info
Portable PA system with UHF receiver unit, audio player and Bluetooth - Portable all-in-one PA system for mobile use - Ideal for mains independent and wireless applications, e.g. at sales events, lectures and gyms - 4-channel power mixer (40 W RMS) and 2-way speaker system with a 20 cm woofer (8“) - MP3 player with Bluetooth receiver and IR remote control - SD card slot and USB input - Stream music wirelessly from your mobile devices (e.g. smartphone, tablet) via Bluetooth - Integrated UHF receiver unit and matching wireless microphone - Mains operation or battery operation for up to 4 hours of music playing - Integrated automatic charging of the battery - Lead gel battery optionally available (E6506305) - 2 mono input channels mic/line with adjustable echo effect - 1 stereo stereo input channel for line signal sources e.g. CD players and notebook - Common 2-band EQ for highs and lows - Link output for the combination of several amplifier systems - Jack for external 12V battery operation (e.g. car battery) - Black plastic enclosure with metal grille and carrying handle - Operation of the hand-held microphone via 2 x AA batteries (not included) - Flange for speaker stand installation etc.
|
Portable, Rechargeable PA with Bluetooth
Take great sound with you wherever your music takes you with the Mackie FreePlay portable PA system with Bluetooth. Hook up a vocal mic and your acoustic-electric guitar, stream backing tracks from your smartphone via Bluetooth, and you're ready to perform with up to 10 hours of operation from eight D-cell batteries. Polish your sound with 16 effects including delay and reverb, while built-in feedback elimination makes sure you always sound great. Take it from Sweetwater, the Mackie FreePlay is a powerful, convenient and flexible portable PA system.
Tech Specs Speaker Drivers | 1 x 8" LF, 2 x 1" HF | Number of Mixer Channels | 4 | Number of Mic Preamps | 2 | EQ | 3-band | Inputs | 2 x XLR/TRS Combo, 1 x 1/8“ | Outputs | 1 x 1/4“ | Power Amp | 150W (RMS), 300W (Peak) | Frequency Response | 65Hz-20kHz (-10 dB) | Playback | Bluetooth | Enclosure Material | ABS | Height | 9.5“ | Width | 17.8“ | Depth | 9.1“ | Weight | 11 lbs. 5 Kgs
| Manufacturer Part Number | FreePlay |
|
LDRJ8 Battery Powered Bluetooth Loudspeaker with Mixer
The Road Jack Series 8" active 2-way system takes your sounds anywhere. With built-in wheels and extension handles for carting convenience the LDRJ8 features a 90 Hz - 18 kHz frequency range and 100 watts peak output. A rechargeable battery pack provides up to 20 hours of continuous operation.
The integrated mixer sports 3 channels with individual volume controls, a 2-band EQ plus adjustable reverb and master volume. Combo, 6.3 mm TRS jack, RCA and 3.5 mm TRS mini-jack connectors allow for a wide variety of input sources.
The LDRJ8\'s major feature is a built-in Bluetooth player which permits wireless streaming to the system. It also supports SD card and USB storage devices. The player menu includes language selection and multiple genre specific presets for instant EQ adjustment.
The LDRJ8 comes with a handy IR remote control and convenient stand mount insert.
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom made
- HF driver size: 3" (wide range)
- HF driver size: 76.2 mm
- HF driver magnet: ferrite
- HF driver brand: custom made
- Amplifier: class D
- Power Output (RMS): 25 W
- Power Output (Peak): 100 W
- Frequency Response: 90 - 18.000 Hz
- SPL (1 W/1 m): 94 dB
- Max SPL: 113 dB
- Protection: Short circuit, overvoltage, overload protection
- Controls: Mic 1 Level, Mic 2 Level, CD / Tape IN Level, Low, High, Reverb, Master Volume, AUX / MP3 switch
- Indicators: Power, charge/battery status
Media player
- Supported media: Bluetooth, USB stick, SD card
- Supported formats: MP3 file, WAV-CD, WMA-CD
- Media player controls: Mode (Menu / Bluetooth /SD / USB) , Play / Pause, Stop, Repeat, Previous Track, Next Track)
- Media player display elements: Lighted multifunctional LC display
- Line Inputs: 1
- Line Input Connectors: 2 x cinch, 3.5 mm jack
- Mic Inputs: 2
- Mic Input Connectors: XLR, 6.3 mm jack
- Power Supply: switching power supply
- Operating Voltage: 100 V - 120 V / 60 Hz, 220 V - 240 V / 50 Hz
- rechargeable batteries: 12 V / 5 Ah
- Cabinet Material: 15 mm MDF
- Cabinet Type: bass reflex
- Width: 385 mm
- Height: 450 mm
- Depth: 298 mm
- Other Features: Stand mount 36 mm, transport castors, pull-out handle, carrying handle, IR Remote for Media Player
| The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driveris operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peakpower. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. An IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input viaRCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to twohand-held transmitter microphones The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10 "
HF driver brand
Custom-made
Frequency response
55 - 18000 Hz
Protection circuits
over-current , overload protection , short circuit
Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume
Indicators
Charge/battery status , Power
Supported media
Bluetooth , SD Card , USB stick
Supported formats
MP3 file , WAV-CD , WMA file
Media player controls
equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop
Media player display elements
Lighted multifunctional LC display
Line input connectors
2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm jack
Mic inputs
2 x XLR , 6.3 mm jack
Operating voltage
Switching power supply
Operating voltage
100 V - 120 V / 60 Hz , 220 V - 240 V AC / 50 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle
|
Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8" woofer and 1" tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming. Voice Priority mutes music when a wireless mic is used. Echo effect for richer-sounding vocals. Industry’s only Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level. Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote. Retractable handle and rugged wheels make it amazingly easy to transport. Built-in storage compartment for 2 handhelds or bodypack transmitters. Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required). Active limiter prevents speaker damage from loud signal spikes. Can be powered via AC power, battery or direct DC. Weight:16kg
Max. Power Output |
190 Watts |
Amplifier |
Class D |
Sensitivity Typical |
89db |
Maximum |
108db |
T.H.D. |
< 1% |
Frequency Response |
50 Hz - 18 kHz |
Speaker Tweeter |
1" Compression Driver |
Bass |
8" Woofer |
Coverage |
H80° x V60° |
Audio Inputs Wired |
XLR x 1, 6.3 mm (1/4 ") x 1 |
Wireless |
Up to 4 wireless microphones |
Audio Player |
CDM-2︱DPM-3 |
Line-In |
Unbalanced RCA jack |
Bluetooth Connectivity |
Yes |
Audio Output |
Unbalanced line RCA jack |
Extension Speaker |
Ø 6.3 mm (1/4 ") Phone jack |
Master Volume Control Manually or Wirelessly via ACT-32HR |
|
Controls |
Tone, Voice Priority & Echo on wireless mics |
Storage |
2 handheld or bodypack transmitters |
Installation |
Speaker stand, flat surface or retractable handle & wheels |
Power Supply AC |
Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W) |
DC & Battery |
24 - 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2 |
Charge Time |
8 hours (automatic charging management) |
Standby Time |
> 7 hours |
Battery Indicator |
4-level indicator (25/50/75/100%) |
Color |
Black or white option |
Dimensions |
336 x 545 x 325mm |
Weight |
16.3 kg 36 lbs (MB-70 batteries included) |
Wireless System (optional) |
|
Receiver |
1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync |
Max. Receiver |
Up to 4 |
Frequency Range |
|
MRM-70B︱MRM-70W︱MRM-80 |
UHF 480 ~ 934 MHz (country dependent) |
MRM-24 |
2.4 GHz |
Preset Channels & Bandwidth |
See Accessories - Receiver Modules |
Transmitters |
See Accessories - Receiver Modules |
Microphones |
MM-107︱MM-39︱MM-59 Wired Dynamic Microphone |
Interlinking Transmitter |
MTM-92 |
Installation |
Plug-in Module |
Antenna |
Built-in |
Audio Player (optional) |
|
Model |
CDM-2 | DPM-3 |
Installation |
Plug-in Module |
Note Refer to actual product in the event of product description discrepancy |
|
|
Reviews
There are no reviews yet.