BOSS BC-1X Bass Compressor Pedal

241.80 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Intelligent circuitry adapts to every register and playing nuance, providing natural compression that preserves the fundamental bass tone Interactive internal processing enables users to dial in sophisticated multiband compressor settings with simple stompbox controls Professional 18-volt input electronics provide ample headroom for any bass, ensuring clean and punchy sound with no distortion High-resolution gain reduction […]

 

Read more

  • Intelligent circuitry adapts to every register and playing nuance, providing natural compression that preserves the fundamental bass tone
  • Interactive internal processing enables users to dial in sophisticated multiband compressor settings with simple stompbox controls
  • Professional 18-volt input electronics provide ample headroom for any bass, ensuring clean and punchy sound with no distortion
  • High-resolution gain reduction indicator shows the current compression amount at a glance
  • Digital circuitry greatly reduces noise, a common problem with standard compressors
  • BOSS five-year warranty

SpecificationsNominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterBypassBuffered bypassControlsPedal switch
THRESHOLD knob
RATIO knob
RELEASE knob
LEVEL knobIndicatorCHECK indicator (Serves also as battery check indicator)
GAIN REDUCTION indicatorConnectorsINPUT jack
OUTPUT jack
DC IN jackPower SupplyAlkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
AC adaptor (sold separately)Working Voltage18 VCurrent Draw90 mAExpected battery life under continuous use (These figures will vary depending on the actual conditions of use.)Alkaline: Approx. 3 hoursAccessoriesOwner\’s Manual
Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTE,” and “Information“)
Alkaline battery (9V, 6LR61)Options (sold separately)AC adaptor: PSA seriesSize and WeightWidth73 mm
2-7/8 inchesDepth129 mm
5-1/8 inchesHeight59 mm
2-3/8 inchesWeight(including battery)450 g
1 lb

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “BOSS BC-1X Bass Compressor Pedal”

Your email address will not be published. Required fields are marked *

Quick Comparison

BOSS BC-1X Bass Compressor Pedal removeDIGITECH HM2 HarmonyMan Intelligent Pitch Shifter Guitar Effects Pedal removeBOSS CEB-3 Bass Chorus Pedal removeBOSS MD-2 Mega Distortion Pedal removeBOSS FZ-5 PEDAL LEVEL-MODE-FUZZ removeEVENTIDE TIMEFACTOR MULTIDELAY/PEDAL remove
NameBOSS BC-1X Bass Compressor Pedal removeDIGITECH HM2 HarmonyMan Intelligent Pitch Shifter Guitar Effects Pedal removeBOSS CEB-3 Bass Chorus Pedal removeBOSS MD-2 Mega Distortion Pedal removeBOSS FZ-5 PEDAL LEVEL-MODE-FUZZ removeEVENTIDE TIMEFACTOR MULTIDELAY/PEDAL remove
Image
SKUBC-1XHM2690.ROL.305BOS.1575.0026690.ROL.030TIMEFACTOR
Rating
Price241.80 incl. GR VAT 194.00 incl. GR VAT137.63 incl. GR VAT137.63 incl. GR VAT 137.63 incl. GR VAT 519.21 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Intelligent circuitry adapts to every register and playing nuance, providing natural compression that preserves the fundamental bass tone
  • Interactive internal processing enables users to dial in sophisticated multiband compressor settings with simple stompbox controls
  • Professional 18-volt input electronics provide ample headroom for any bass, ensuring clean and punchy sound with no distortion
  • High-resolution gain reduction indicator shows the current compression amount at a glance
  • Digital circuitry greatly reduces noise, a common problem with standard compressors
  • BOSS five-year warranty

SpecificationsNominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterBypassBuffered bypassControlsPedal switch
THRESHOLD knob
RATIO knob
RELEASE knob
LEVEL knobIndicatorCHECK indicator (Serves also as battery check indicator)
GAIN REDUCTION indicatorConnectorsINPUT jack
OUTPUT jack
DC IN jackPower SupplyAlkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
AC adaptor (sold separately)Working Voltage18 VCurrent Draw90 mAExpected battery life under continuous use (These figures will vary depending on the actual conditions of use.)Alkaline: Approx. 3 hoursAccessoriesOwner\'s Manual
Leaflet (“USING THE UNIT SAFELY," "IMPORTANT NOTE," and "Information“)
Alkaline battery (9V, 6LR61)Options (sold separately)AC adaptor: PSA seriesSize and WeightWidth73 mm
2-7/8 inchesDepth129 mm
5-1/8 inchesHeight59 mm
2-3/8 inchesWeight(including battery)450 g
1 lb

Following up on the success and rave reviews of our newly released Vocalist® products, we decided to make a pedal with the same cool features but specifically designed for the guitarist. With our exclusive musIQ™ technology we were able to combine the lightning-fast natural sounding harmony generation made famous by the Vocalist pedals, and fuse it with the demands of professional guitarists everywhere.

HarmonyMan™ is the world's first guitar pedal that generates harmonies based on your chord progression. It features four different types of pitch shifting depending on which of the 42 different voices are selected. Combine up to two distinct voices in any combination to accompany the input signal: a 3rd or 5th above or below, an octave up, two octaves below, 24 semitones and 4 detune variations. Simply play the songs you know and love, and when the spotlight cues your solo, hit the harmony footswitch to get amazing multi-part guitar harmonies!

Features
  • Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
  • 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
  • Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
  • Edit, store and recall 4 memory presets.
  • Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
  • Built-in guitar tuner
  • Pre-harmony Distortion loop
  • Features
  • Shifting Modes
  • Configurations
  • Specifications
Features
  • Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
  • 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
  • Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
  • Edit, store and recall 4 memory presets.
  • Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
  • Built-in guitar tuner
  • Pre-harmony Distortion loop
Shifting Modes Triad Center Shifting Mode

Create musically correct harmonies based around your favorite chordal structure whether soloing a riff in a specific key or using the sidechain input for chord recognition.

Scalic Shifting Mode

Creates musically correct harmonies with various shifting depending on the harmony key.

Fixed (chromatic) Shifting Mode

Applies fixed harmony intervals to all notes with the fixed number of semitones selected.

Detune Shifting Mode

Get a thick overall sound applying a small fixed amount of pitch shifting to the lead guitar voice ranging from 5 cents to 30 cents in both up and down directions simultaneously.

Configuration Electric Guitar With Pre-Harmony Distortion and Stereo Amplifiers Add distortion to your lead and harmonies.

Config 1 The Side-Chain Using Two Guitars with Pre-Harmony Distortion This configuration is used when the 2nd guitar is the source signal.

Config 2 Specifications

Unit Dimensions: 9.75" x 7.9" x 3.4“
Unit Weight: 4 lbs./1.82 kg.
Power Supply: 9VAC 1300mA PS0913B-120 Included
Inputs: 1/4" Unbalanced
Outputs: 1/4" Unbalanced
Sidechain: Ground Lift Switch

The CEB-3 Bass Chorus pedal offers a split-frequency chorus effect capable of applying warm, rich chorusing to the higher frequencies without muddying up the lows. It's the perfect chorus pedal for bassists.

  • Compact chorus pedal especially designed for bass guitar
  • Applies chorus sound to the high frequencies without altering low frequencies
  • Effect Level, Low Filter, Rate and Depth knobs permit precise tonal shaping
  • BOSS 5-year warranty

The MD-2 Mega distortion takes the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme. The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.

  • Produces extreme, low-end distortion for modern metal and hard rock
  • Gain Boost circuit creates huge distortion and sustain regardless of level
  • New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars
  • Tone control adjusts balance between high and low frequencies
  • BOSS 5-year warranty
The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
  • Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
  • Uses advanced COSM technology to recreate classic fuzz
  • BOOST control for more aggressive tone
  • Road-tough BOSS metal construction
Nominal Input Level -20 dBu
Input Impedance 1 M ohm
Nominal Output Level -20 dBu
Output Impedance 1 k ohm
Recommended Load Impedance 10 k ohms or greater
Controls Pedal switch, LEVEL knob, FUZZ knob, MODE knob
Indicator CHECK indicator (Serves also as battery check indicator)
Connectors INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V)
Power Supply DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)
Current Draw 36 mA (DC 9 V)
Expected battery life under continuous use Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use.
Accessories Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61)
Options AC Adaptor (PSA series)
Size and Weight
Width
73 mm 2-7/8 inches
Depth
129 mm 5-1/8 inches
Height
59 mm 2-3/8 inches
Weight
440 g 1 lbs.
Studio Quality Effects at Your Feet Top recording studios worldwide use Eventide effects on hit after hit. TimeFactor includes Eventide's best delay effects from the past 36 years without compromising quality OR flexibility. Flexibility Built-In Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals. Obsolescence is so 20th Century Easy to upgrade; download new software from the Internet and install via USB. Features
  • 10 Stereo or Mono Delay effects
    • Digital Delay
    • Vintage Delay
    • Tape Echo
    • Mod Delay
    • Ducked Delay
    • Band Delay
    • Filter Pong
    • MultiTap
    • Reverse
    • Looper
  • Studio Quality Sound
  • Instant Program Change
  • Real-time control with 10 knobs, MIDI or expression pedal
  • Tap Tempo and MIDI Clock Sync
  • 40 User Presets, unlimited through MIDI
  • True Analog Bypass
  • Rugged cast metal construction
  • Metal footswitches for instant Preset access
  • Mono or Stereo operation
  • Guitar or Line Level Inputs and Outputs
SPECIFICATIONS:
Analog Input/Output
Input impedance 500K ohms
Output Impedance 470 ohms
Recommended Load Impedance 10K ohms or greater
Connectors
Input 1 (mono) ¼ inch mono phone jack
Input 2 ¼ inch mono phone jack
Output 1 (mono) ¼ inch mono phone jack
Output 2 ¼ inch mono phone jack
Expression Pedal ¼ inch mono phone jack
Aux Switch ¼ inch stereo phone jack
USB Type B Socket. Use 2.0 cables only.
MIDI In Five pin DIN (Female)
MIDI Out/Thru Five pin DIN (Female)
AC Adapter Jack Power Supply included (see below)
Physical
Power 9 VDC, 1200 mA, Tip hot (+)
Dimensions English: 4.8" (H) x 7.5" (W) x 2.12" (D) Metric: 122 (H) x 190 (W) x 54 (D) mm
Weight 2.15 lbs, 1kG
Weight0.50 kg1.82 kg1.40 kg1.20 kg0.44 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 1.82 kg
Weight 1.40 kg
Weight 1.20 kg
Weight 0.44 kg
Weight 1.00 kg