BOSS BC-1X Bass Compressor Pedal

241.80 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Intelligent circuitry adapts to every register and playing nuance, providing natural compression that preserves the fundamental bass tone Interactive internal processing enables users to dial in sophisticated multiband compressor settings with simple stompbox controls Professional 18-volt input electronics provide ample headroom for any bass, ensuring clean and punchy sound with no distortion High-resolution gain reduction […]

 

Read more

  • Intelligent circuitry adapts to every register and playing nuance, providing natural compression that preserves the fundamental bass tone
  • Interactive internal processing enables users to dial in sophisticated multiband compressor settings with simple stompbox controls
  • Professional 18-volt input electronics provide ample headroom for any bass, ensuring clean and punchy sound with no distortion
  • High-resolution gain reduction indicator shows the current compression amount at a glance
  • Digital circuitry greatly reduces noise, a common problem with standard compressors
  • BOSS five-year warranty

SpecificationsNominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterBypassBuffered bypassControlsPedal switch
THRESHOLD knob
RATIO knob
RELEASE knob
LEVEL knobIndicatorCHECK indicator (Serves also as battery check indicator)
GAIN REDUCTION indicatorConnectorsINPUT jack
OUTPUT jack
DC IN jackPower SupplyAlkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
AC adaptor (sold separately)Working Voltage18 VCurrent Draw90 mAExpected battery life under continuous use (These figures will vary depending on the actual conditions of use.)Alkaline: Approx. 3 hoursAccessoriesOwner\’s Manual
Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTE,” and “Information“)
Alkaline battery (9V, 6LR61)Options (sold separately)AC adaptor: PSA seriesSize and WeightWidth73 mm
2-7/8 inchesDepth129 mm
5-1/8 inchesHeight59 mm
2-3/8 inchesWeight(including battery)450 g
1 lb

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “BOSS BC-1X Bass Compressor Pedal”

Your email address will not be published. Required fields are marked *

Quick Comparison

BOSS BC-1X Bass Compressor Pedal removeBOSS BD-2 Blues Driver Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal removeBOSS TR-2 Tremolo Pedal removeBEHRINGER VD-400 Vintage delay analog pedal removeDIGITECH HM2 HarmonyMan Intelligent Pitch Shifter Guitar Effects Pedal remove
NameBOSS BC-1X Bass Compressor Pedal removeBOSS BD-2 Blues Driver Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal removeBOSS TR-2 Tremolo Pedal removeBEHRINGER VD-400 Vintage delay analog pedal removeDIGITECH HM2 HarmonyMan Intelligent Pitch Shifter Guitar Effects Pedal remove
Image
SKUBC-1X690.ROL.020E007855690.ROL.105VD400HM2
Rating
Price241.80 incl. GR VAT155.00 incl. GR VAT 32.00 incl. GR VAT 102.00 incl. GR VAT 35.00 incl. GR VAT 188.33 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)In stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Intelligent circuitry adapts to every register and playing nuance, providing natural compression that preserves the fundamental bass tone
  • Interactive internal processing enables users to dial in sophisticated multiband compressor settings with simple stompbox controls
  • Professional 18-volt input electronics provide ample headroom for any bass, ensuring clean and punchy sound with no distortion
  • High-resolution gain reduction indicator shows the current compression amount at a glance
  • Digital circuitry greatly reduces noise, a common problem with standard compressors
  • BOSS five-year warranty

SpecificationsNominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterBypassBuffered bypassControlsPedal switch
THRESHOLD knob
RATIO knob
RELEASE knob
LEVEL knobIndicatorCHECK indicator (Serves also as battery check indicator)
GAIN REDUCTION indicatorConnectorsINPUT jack
OUTPUT jack
DC IN jackPower SupplyAlkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
AC adaptor (sold separately)Working Voltage18 VCurrent Draw90 mAExpected battery life under continuous use (These figures will vary depending on the actual conditions of use.)Alkaline: Approx. 3 hoursAccessoriesOwner\'s Manual
Leaflet (“USING THE UNIT SAFELY," "IMPORTANT NOTE," and "Information“)
Alkaline battery (9V, 6LR61)Options (sold separately)AC adaptor: PSA seriesSize and WeightWidth73 mm
2-7/8 inchesDepth129 mm
5-1/8 inchesHeight59 mm
2-3/8 inchesWeight(including battery)450 g
1 lb

Features   The BD-2 Blues Driver delivers the creamy, yet crunchy sound associated with great blues guitar. This popular pedal provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.

  • Classic "blues" guitar tones with tube amp simulation
  • Warm distortion and overdrive
  • Responds to nuance and volume changes
  • AC adaptor or 9V battery operation
  • BOSS 5-year warranty
 

VINTAGE TUBE OVERDRIVE TO800

What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain

Vintage Tube-Like Tone

In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.

Ease of Use

Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
  • Get vintage overdrive, smooth sustain and screaming fat tone
  • Perfect for guitar; great for bass and keyboards, too
  • Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
  • Captures every nuance of your playing from smooth overdrive to screaming tube sounds
  • Dedicated Drive, Tone and Level controls for awesome sound shaping
  • Status LED for effect on/off and battery check
  • Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
  • Rugged electronic On/Off switch for noise-free operation
The BOSS TR-2 Tremolo is designed to provide guitarists with classic tremolo effects in an easy-to-use compact pedal. Dedicated "Wave," "Rate," and "Depth" knobs provide a multitude of effect possibilities.
  • Provides guitarists with high-quality vintage tremolo effects in an easy-to-use compact pedal
  • Dedicated "Wave," "Rate" and "Depth" knobs allow for precise effect tailoring
  • “Rate" control allows for higher speed adjustment than classic PN-2
  • “Wave" control alters LFO waveform from triangle to square
  • “Depth" control determines the strength of the effect
  • BOSS 5-year warranty
  • Experience true analog delay and vintage slap-back echo that rivals any tape delay
  • This BEHRINGER product has been designed to compete head to head with leading products on the market
  • Vintage BBDs produce up to 300 ms of delay and advanced noise reduction circuit keeps your signal clean
  • Dedicated Intensity, Echo and Repeat Rate controls for awesome sound shaping
  • Blue status LED for effect on/off and battery check
  • Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
  • First-class electronic On/Off switch for highest signal integrity in bypass mode
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
Analog at its Finest Though digital sound technology constantly evolves, nothing sounds quite like the "old-school” analog Bucket Brigade-style delay you get when you step on the VD400. With its dedicated REPEAT RATE, INTENSITY and ECHO dials, this amazing little stomp box evokes the spirits of some of rock and rollʼs most legendary heroes, and provides up to 300 milliseconds of true analog delay. Every type of classic delay, from a deep-space whisper, to an interplanetary battle cry—is at your command. Easy to Operate The bright blue LED tells you when the Vintage Delay is activated (and serves as a beacon for other time travelers), and the top-quality on/off switch maintains excellent signal integrity in bypass mode.  You can power the VD400 with either a 9 V battery or our PSU-SB DC power supply (not included). Like a Trip Back in Time… The VINTAGE DELAY VD400 is like a snapshot pulled right out of time—and its low, low price tag will have you reminiscing about how much you miss those "good-old” days. Visit your BEHRINGER dealer without delay, delay, delay...

Following up on the success and rave reviews of our newly released Vocalist® products, we decided to make a pedal with the same cool features but specifically designed for the guitarist. With our exclusive musIQ™ technology we were able to combine the lightning-fast natural sounding harmony generation made famous by the Vocalist pedals, and fuse it with the demands of professional guitarists everywhere.

HarmonyMan™ is the world's first guitar pedal that generates harmonies based on your chord progression. It features four different types of pitch shifting depending on which of the 42 different voices are selected. Combine up to two distinct voices in any combination to accompany the input signal: a 3rd or 5th above or below, an octave up, two octaves below, 24 semitones and 4 detune variations. Simply play the songs you know and love, and when the spotlight cues your solo, hit the harmony footswitch to get amazing multi-part guitar harmonies!

Features
  • Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
  • 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
  • Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
  • Edit, store and recall 4 memory presets.
  • Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
  • Built-in guitar tuner
  • Pre-harmony Distortion loop
  • Features
  • Shifting Modes
  • Configurations
  • Specifications
Features
  • Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
  • 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
  • Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
  • Edit, store and recall 4 memory presets.
  • Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
  • Built-in guitar tuner
  • Pre-harmony Distortion loop
Shifting Modes Triad Center Shifting Mode

Create musically correct harmonies based around your favorite chordal structure whether soloing a riff in a specific key or using the sidechain input for chord recognition.

Scalic Shifting Mode

Creates musically correct harmonies with various shifting depending on the harmony key.

Fixed (chromatic) Shifting Mode

Applies fixed harmony intervals to all notes with the fixed number of semitones selected.

Detune Shifting Mode

Get a thick overall sound applying a small fixed amount of pitch shifting to the lead guitar voice ranging from 5 cents to 30 cents in both up and down directions simultaneously.

Configuration Electric Guitar With Pre-Harmony Distortion and Stereo Amplifiers Add distortion to your lead and harmonies.

Config 1 The Side-Chain Using Two Guitars with Pre-Harmony Distortion This configuration is used when the 2nd guitar is the source signal.

Config 2 Specifications

Unit Dimensions: 9.75" x 7.9" x 3.4“
Unit Weight: 4 lbs./1.82 kg.
Power Supply: 9VAC 1300mA PS0913B-120 Included
Inputs: 1/4" Unbalanced
Outputs: 1/4" Unbalanced
Sidechain: Ground Lift Switch

Weight0.50 kg1.20 kg0.50 kg1.20 kg1.00 kg1.82 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 1.20 kg
Weight 0.50 kg
Weight 1.20 kg
Weight 1.00 kg
Weight 1.82 kg