| Content | Even with the best-selling delays in compact-pedal history, BOSS continues to push the envelope and innovate. The new DD-7 takes the best features from its predecessors and expands the creative potential with Modulation Delay mode, classic modeled Analog Delay mode, External pedal control options, longer delay time, and more.
- Expanded delay time, up to 6.4 seconds
- Modulation Delay mode offers natural, chorus-type sounds
- Analog Delay mode models the classic warm BOSS DM-2 analog delay sound
- Tap tempo controllable via external footswitch
- Delay time, feedback, and effect level can be controlled via external Expression pedal (sold separately)
- Up to 40 seconds of recording for sound on sound (Hold mode)
| Controls |
E.LEVEL, F.BACK, D.TIME, MODE
Pedal switch |
| Indicator |
CHECK (Used for indication of TEMPO, HOLD, and to check battery) |
| Connectors |
INPUT-A (MONO) jack, INPUT-B jack
OUTPUT-A (MONO) jack, OUTPUT-B jack
TEMPO/EXP jack
AC adaptor jack (DC 9 V) |
| Delay Time |
1 ms to 6400 ms*
Maximum recording time: 40 sec (in Hold mode)
*Values may vary according to the mode and connections. |
| Nominal Input Level |
-20 dBu |
| Input Impedance |
1 M ohm |
| Nominal Output Level |
-20 dBu |
| Output Impedance |
1 k ohm |
| Recommended Load Impedance |
10 ohms or greater |
| Power Supply |
DC 9 V:
Dry battery, 9 V type (6F22/carbon, 6LR61/alkaline)
AC Adaptor (PSA-series: optional) |
|
DC 9 V: Dry battery 6F22 (9 V) type (carbon)/
Dry battery 6LR61 (9 V) type (alkaline),
AC Adaptor (PSA-series: optional) |
| Current Draw |
55 mA (DC 9 V)
* Expected battery life under continuous use: Carbon: 1.5 hours, Alkaline: 6 hours. These figures will vary depending on the actual conditions of use. |
| Accessories |
Owner's Manual, Mode Sticker, Application Sticker, Leaflets (“USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information“), Dry battery (9 V type, 6LR61) *1 |
| Options |
AC adaptor (PSA-series), Footswitch: FS-5U, Expression pedal: Roland EV-5 |
| Size and Weight |
| Width |
|
| Depth |
|
| Height |
|
| Weight |
|
| Studio Quality Effects at Your Feet
Top recording studios worldwide use Eventide effects on hit after hit. TimeFactor includes Eventide's best delay effects from the past 36 years without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
- 10 Stereo or Mono Delay effects
- Digital Delay
- Vintage Delay
- Tape Echo
- Mod Delay
- Ducked Delay
- Band Delay
- Filter Pong
- MultiTap
- Reverse
- Looper
- Studio Quality Sound
- Instant Program Change
- Real-time control with 10 knobs, MIDI or expression pedal
- Tap Tempo and MIDI Clock Sync
- 40 User Presets, unlimited through MIDI
- True Analog Bypass
- Rugged cast metal construction
- Metal footswitches for instant Preset access
- Mono or Stereo operation
- Guitar or Line Level Inputs and Outputs
SPECIFICATIONS:
| Analog Input/Output |
| Input impedance |
500K ohms |
| Output Impedance |
470 ohms |
| Recommended Load Impedance |
10K ohms or greater |
| Connectors |
| Input 1 (mono) |
¼ inch mono phone jack |
| Input 2 |
¼ inch mono phone jack |
| Output 1 (mono) |
¼ inch mono phone jack |
| Output 2 |
¼ inch mono phone jack |
| Expression Pedal |
¼ inch mono phone jack |
| Aux Switch |
¼ inch stereo phone jack |
| USB |
Type B Socket. Use 2.0 cables only. |
| MIDI In |
Five pin DIN (Female) |
| MIDI Out/Thru |
Five pin DIN (Female) |
| AC Adapter Jack |
Power Supply included (see below) |
| Physical |
| Power |
9 VDC, 1200 mA, Tip hot (+) |
| Dimensions |
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm |
| Weight |
2.15 lbs, 1kG |
| The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications
- Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
| All-Time Favorite Chorus Effects, Modeled in a Single X-Series Pedal
Introducing the DigiTech CF-7 Chorus Factory. Think of it as 1-stomp shopping for all of your ultra high quality chorus needs. Besides Speed and Depth knobs, they've included a 2-in-1 concentric control that lets you tweak 2 more key parameters of each chorus effect. Add Flexible Output Mode, cast metal treadle and sleek carbon fiber finish and you have an industrial strength creative tool. If one of the best classic choruses with added control begs to be a part of your sound, you've just found the perfect pedal.
Features:
7 classic chorus effects models
Speed, depth and 2 parameter controls for each effect
Flexible output mode -- configure outputs for amp or mixer
CIT models classic speaker cabinets
Cast-metal treadle and chassis
Unique carbon-fiber look
Non-skid rubber base
Based on the Boss CH-1*
Based on the EH Small Clone*
Based on the DigiTech Multi Chorus
DigiTech, X-Series, Flexible Output Mode, DigiTech Whammy, Multi Chorus, CIT and CF-7 Chorus Factory are trademarks of Harman International Industries, Inc. |
Bass chorus like the world has never known.
The DigiTech XBC Bass Multi Chorus Pedal is designed especially for bass. The XBC Bass Chorus Pedal lets you morph up to 16 bass chorus voices at once for an endless palette of amazingly rich effects. Built-in voice randomization increases with more voices for an even denser wash of killer chorus. DigiTech includes a 9V battery with the XBC Bass Multi Chorus Pedal.
DigiTech XBC Bass Multi Chorus Pedal Features:
- Designed especially for bass
- Morph up to 16 bass chorus voices at once
- Voice randomization increases with more voices
|
Reviews
There are no reviews yet.