Content | The Soundweb London BLU-DAN offers Dante audio and BLU link. This means that the BLU-DAN can be used to ‘add’ Dante to one or more BLU link devices.
The BLU-DAN is configurable through HiQnet Audio Architect. A rich palette of logic objects and a "drag and drop" method of configuration provide a simple and familiar design environment.
The BLU-DAN features Dante audio. The BLU-DAN is capable of simultaneously transmitting and receiving up to 64 channels of Dante audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port.
The BLU-DAN also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect.
The BLU-DAN and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
- AES67 and Dante Audio with support for Dante Domain Manager
- BLU link – 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
- ‘Add’ Dante / AES67 to one or more BLU link devices
- Clear Front Panel LED Indication
- Bi-Directional Locate Functionality
- HiQnet Device
- Configuration, Control and Monitoring from HiQnet Audio Architect
- 1RU, Half-Rack Device
- AES67 Compatible
- EN 54-16 Compliant for life safety applications
*The price is without VAT
| The dbx 520 will help you expertly tame the excessive sibilance often found in vocals and other high frequency dense material. Based upon the legendary dbx 902, the dbx 520’s unique features make it possible to achieve an exact amount of de-essing regardless of variations in signal levels. The 520 allows you to create brilliant, crisp vocals without sibilance!
With its modular 500 Series based design, the dbx 520 examines the differences in dB between the high frequency and full-bandwidth portions of a signal, allowing de-essing of signals which change in level by as much as 60dB. It features a Frequency Control with range from 800Hz to 8kHz, Gain Reduction Metering and a De-essing Amount Range from 0dB to 20dB.
Control vocals, drums, percussive instruments and problematic material/reverb combinations with the dbx 520! |
The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to our 900 Series and the 560A continues that tradition.
Featuring the same switch-selectable OverEasy? and Hard Knee compression curves as our industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! It’s also versatile enough to go from subtle compression to "brick wall" peak limiting. |
An elegant slim-line device contains all the functions required by a system for distributing different musical programmes in homes for multi-room sound systems and commercial premises.
Three different musical programmes and one for paging can be transmitted in five mono zones, or alternatively four zones, one of which is in stereo. It is also possible to extend the number of zones to ten using a simple connector to interlink two systems. The system has five amplified 20 W / 4 ohm outputs. For each of the five zones, a direct auxiliary input is available for connecting sources such as CD players or mixers to be used exclusively for one zone/room.
The back-lit display and function keys make it possible to access all the menus for configuring and adjusting the system: Volume, Tone, Loudness, Output settings, VOX.
Features |
---|
3 Music Source Inputs individually selectable to each output | One Input Source with Override facility (Jukebox or Auto Announcer) | 5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones | Can be expanded interlink of two or more MS520 units | Inbuilt 20W into 4 Ohms 5 channel Amplifiers (1 Stereo – 3 Mono Option) | Direct Inputs and Outputs on each zone | Paging or Alarm Input Override System | Full Digital Matrix control of functions to all 5 zones | Up to 10 remote control panels RC 62 can be connected to each MS 520 |
AMPLIFIER SPECIFICATIONS |
---|
Power output: | 5 x 20 | Watt rms | Frequency Response (Music): | 30 ÷ 45 | Hz ÷ kHz | Frequency Response (Direct): | 30 ÷ 45 | Hz ÷ kHz | Frequency Response (Paging): | 200 ÷ 18 | Hz ÷ kHz | Distortion: | 0.5 | % | Signal / noise ratio (Music): | -78 | dB | Signal / noise ratio (Direct): | -78 | dB | Signal / noise ratio (Paging): | -60 | dB |
INPUT SECTION |
---|
Input sensitivity (Music): | -16 | dBu | Input sensitivity (Direct): | -16 | dBu | Input sensitivity (Paging - Line): | - 43 ÷ -27 | dBu | Input sensitivity (Paging - Mic): | - 58 ÷ -41 | dBu | Bass Tone: | (100 kHz) ± 8 | dB | Treble Tone: | (12.5 kHz) ± 8 | dB |
OUTPUT SECTION |
---|
Out level: | -6 / -10 | dB | Protections: | Short ciurcuit, thermal, AC / DC fuses | | Power supply: | 16 | V dc |
POWER REQUIREMENT |
---|
Operating voltage: | 220÷240 / 110÷120 V ~ 50 / 60 Hz | V ~ Hz | Power (consumption): | 370 | W | Max. Available power: | 100 | W |
PHISICAL SPECIFICATION |
---|
Width: | 438 / 17.24 | mm/inch | Height: | 44 / 1.73 | mm/inch | Depth: | 253 / 9.96 | mm/inch | Net Weight: | 3.66 / 8.06 | Kg/Lbs |
SHIPPING INFORMATION |
---|
Package height: | 75 / 2.95 | mm/inch | Package width: | 520 / 20.47 | mm/inch | Package depth: | 280 / 11.02 | mm/inch | Shipping Weight: | 4.18 / 9.21 | Kg/Lbs |
|
The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.
The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.
A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.
Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring
Function |
Four channel expander/gate |
Number of Channels |
4 |
Inputs |
4 x XLR, 4 x TRS 1/4" phone |
Output |
4 x XLR, 4 x TRS 1/4" phone |
Maximum Input Level |
+21dBu |
Compression Threshold |
Not applicable |
Compression Ratio |
Not applicable |
Attack Time |
Not applicable |
Release Time |
Not applicable |
Gate Threshold |
0 to -80dB |
Gate Rate |
Attack: Program dependant Hold: 0 to 4 sec, variable Release: 50ms to 4 sec, variable |
Maximum Output Level |
+21dBu |
Make-up Gain |
Not specified by manufacturer |
Frequency Response |
18HZ to 30kHz |
Dynamic Range |
Not specified by manufacturer |
Noise |
>95dBu, unweighted, 22Hz to 22kHz |
Dimensions |
1U rack mount, 8 1/2" deep |
Specialties |
Unit will operate at either +4dB or -10 dB |
|
mic/line for the BLU-80, BLU-32, BLU-16. |
Reviews
There are no reviews yet.