BUGERA 333XL INFINIUM GUITAR AMPLIFIER 120W

No longer available!

677.29 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: BUGERA 333XL INFINIUM Category:
The 333XL / 333XL-212 is the big brother to the 333 Series, with four key additions: Overall active Presence control. Comes loaded with EL34 power tubes for a more compressed, tighter midrange. Noise Gate on Lead channel. This is an ANALOGUE gate that will never close or shut you off in a clean passage. It […]

 

Read more

The 333XL / 333XL-212 is the big brother to the 333 Series, with four key additions:

  • Overall active Presence control.

  • Comes loaded with EL34 power tubes for a more compressed, tighter midrange.

  • Noise Gate on Lead channel. This is an ANALOGUE gate that will never close or shut you off in a clean passage. It is designed to decrease high frequency noise and hiss without changing your tone and it works loads better than a lot of competitors’ gates.

  • XL switch on Crunch and Lead channels. The XL function will add more “chunk” to your sound. You can add some thunder to the combo version to more closely emulate a 412 cab, thicken the sound of single coil pickups or add sustain to single-note melodic passages.

After that, this design is much like the 333 with three fully independent channels: A totally Clean channel that won’t break up; a Crunch channel for a “halfway dirty” rock and blues tone (or crank the gain for a metal rhythm tone); and a Lead channel with the same structure as the Crunch channel, but with access to more gain. Each of these channels has its own volume feeding the overall master volume, giving you total control over the level of each.

INFINIUM Tube Life Multiplier Technology

Our revolutionary INFINIUM Tube Life Multiplier technology is like having your very own technician inside your amp constantly monitoring and tweaking tube performance for the ultimate in tonal integrity and reliability. This revolutionary circuit not only optimizes the performance of each output tube, it dynamically balances the drive between them to more evenly distribute the load. With INFINIUM, your tubes last up to 20 times longer, saving you substantial money over the lifespan of your amplifier. INFINIUM also compensates for the effects of aging, automatically adjusting current levels to keep your tubes sounding as good as the day they were installed.

If and when a tube does reach the end of its life, the system even tells you which one to replace. All you need do is replace the faulty tube and let INFINIUM take care of the rest for you. This all adds up to more consistent sound quality and longer life for your tubes. Maintenance for tube amps has never been this easy!

Features

  • Hand-built 120-Watt amplifier driven by 4 x EL34 tubes (convertible to 6L6)
  • Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 tubes for boutique clean and face-melting hi-gain tone
  • Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
  • Revolutionary INFINIUM Tube Life Multiplier technology: – Extends the life of your amplifier’s expensive power tubes up to 20 times. – Provides incredible reliability and consistent tone over the complete lifespan of your tubes – No need for expensive matched tube sets – Allows you to mix and match any combination of compatible tube types and brands – Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
  • XL switches on the Lead and Crunch channels for killer low end control
  • Adjustable Noise Gate available on Lead channel
  • Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
  • Classic Presence control for efficient midrange sound shaping
  • Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
  • Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
  • Line output with dedicated Level control
  • Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  • High-quality components and exceptionally rugged construction ensure long life
Weight 30.00 kg

Reviews

There are no reviews yet.

Be the first to review “BUGERA 333XL INFINIUM GUITAR AMPLIFIER 120W”

Your email address will not be published. Required fields are marked *

Quick Comparison

BUGERA 333XL INFINIUM GUITAR AMPLIFIER 120W removeLANEY IRT120H Amplifier Cabinet for Electric Guitar removeMARSHALL 2245-01 JTM45 vintage 30W Guitar Amplifier REISSUE removeBUGERA 6262 INFINIUM Guitar Amplifier with Reverb and INFINIUM Tube Life Multiplier removeMOOER Little Monster Electric Guitar Head 5W removeVOX NT50H-G2 GUITAR AMPLIFIER 50W 8Ω OR 16Ω remove
NameBUGERA 333XL INFINIUM GUITAR AMPLIFIER 120W removeLANEY IRT120H Amplifier Cabinet for Electric Guitar removeMARSHALL 2245-01 JTM45 vintage 30W Guitar Amplifier REISSUE removeBUGERA 6262 INFINIUM Guitar Amplifier with Reverb and INFINIUM Tube Life Multiplier removeMOOER Little Monster Electric Guitar Head 5W removeVOX NT50H-G2 GUITAR AMPLIFIER 50W 8Ω OR 16Ω remove
Image
SKUBUGERA 333XL INFINIUMG07LA000162245-01E005884G07MO00000NT50H-G2
Rating
Price677.29 incl. GR VAT 855.00 incl. GR VAT 1,454.00 incl. GR VAT 696.00 incl. GR VAT 193.00 incl. GR VAT 525.63 incl. GR VAT
Stock

Out of stock

In stock (can be backordered)

In stock

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockIn stock (can be backordered)In stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The 333XL / 333XL-212 is the big brother to the 333 Series, with four key additions:

  • Overall active Presence control.

  • Comes loaded with EL34 power tubes for a more compressed, tighter midrange.

  • Noise Gate on Lead channel. This is an ANALOGUE gate that will never close or shut you off in a clean passage. It is designed to decrease high frequency noise and hiss without changing your tone and it works loads better than a lot of competitors' gates.

  • XL switch on Crunch and Lead channels. The XL function will add more "chunk" to your sound. You can add some thunder to the combo version to more closely emulate a 412 cab, thicken the sound of single coil pickups or add sustain to single-note melodic passages.

After that, this design is much like the 333 with three fully independent channels: A totally Clean channel that won't break up; a Crunch channel for a "halfway dirty" rock and blues tone (or crank the gain for a metal rhythm tone); and a Lead channel with the same structure as the Crunch channel, but with access to more gain. Each of these channels has its own volume feeding the overall master volume, giving you total control over the level of each.

INFINIUM Tube Life Multiplier Technology

Our revolutionary INFINIUM Tube Life Multiplier technology is like having your very own technician inside your amp constantly monitoring and tweaking tube performance for the ultimate in tonal integrity and reliability. This revolutionary circuit not only optimizes the performance of each output tube, it dynamically balances the drive between them to more evenly distribute the load. With INFINIUM, your tubes last up to 20 times longer, saving you substantial money over the lifespan of your amplifier. INFINIUM also compensates for the effects of aging, automatically adjusting current levels to keep your tubes sounding as good as the day they were installed.

If and when a tube does reach the end of its life, the system even tells you which one to replace. All you need do is replace the faulty tube and let INFINIUM take care of the rest for you. This all adds up to more consistent sound quality and longer life for your tubes. Maintenance for tube amps has never been this easy!

Features
  • Hand-built 120-Watt amplifier driven by 4 x EL34 tubes (convertible to 6L6)
  • Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 tubes for boutique clean and face-melting hi-gain tone
  • Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
  • Revolutionary INFINIUM Tube Life Multiplier technology: - Extends the life of your amplifier's expensive power tubes up to 20 times. - Provides incredible reliability and consistent tone over the complete lifespan of your tubes - No need for expensive matched tube sets - Allows you to mix and match any combination of compatible tube types and brands - Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
  • XL switches on the Lead and Crunch channels for killer low end control
  • Adjustable Noise Gate available on Lead channel
  • Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
  • Classic Presence control for efficient midrange sound shaping
  • Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
  • Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
  • Line output with dedicated Level control
  • Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  • High-quality components and exceptionally rugged construction ensure long life
Housing a single high gainIRONHEARTchannel – with full EQ and switchable pre-boost feature the IRT15H is designed to give youCRUSHINGIRONHEARTtones at low output levels which makes it ideal for home recording and your smaller gigs. Using the unique input options of 15W or

Marshall 2245-01 30W Guitar Amplifier

When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.

By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.


Model Name JTM45 (2245)
Series Vintage Reissue
Tubes 3 ECC83 (Preamp), 2 5881 (Power Amp)
Output 30 Watts
OHMS 16
Speakers n/a
Effects n/a
Covering Black Vinyl
Footswitch n/a
Dimensions 660x260x205mm
Weight 14.6kg

Ultimate Rock Tone 120-Watt 2-Channel Tube Amplifier Head with Reverb and INFINIUM Tube Life Multiplier

  • Hand-built 120-Watt amplifier driven by 4 x 6L6 tubes (convertible to EL34)
  • 2-channel preamp design (Clean/Crunch, Lead) featuring 6 x 12AX7 tubes for thick and screaming hi-gain
  • Revolutionary INFINIUM Tube Life Multiplier technology:
    • Extends the life of your amplifierʼs expensive power tubes up to 20 times
    • Provides incredible reliability and consistent tone over the complete lifespan of your tubes
    • No need for expensive matched tube sets
    • Allows you to mix and match any combination of compatible tube types and brands
    • Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
  • Integrated high-class reverb with dedicated Reverb control for each channel
  • Independent Equalizer sections for each channel with dedicated Bass, Mid and Treble controls
  • Classic Presence control per channel for efficient midrange sound shaping
  • Heavy-duty footswitch for Channel selection and FX Loop function included
  • Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  • High-quality components and exceptionally rugged construction ensure long life

 

  • Extremely small all-tube guitar amplifier head
  • NORMAL/TOP BOOST channel select
  • THIN/MELLOW tone control
  • GAIN and VOLUME controls
  • 8Ω/16Ω speaker out select
  • Full metal construction
    Power:

5W
Channels: 1
Equalizer: -
Inputs: 1
Outputs: 2
Effects: -
Valves: Yes
Foot-switch: -
Controls: Thin, Mellow, Gain, Volume
FX Loop: -
Dimensions ( W x H x D ): - 120mm (d) x 193mm (w) x 105mm (h)
Weight: - 2,55kg
 

Info

NT50H-G2 Features: - Output Power: 50 Watts RMS into 8Ω or 16Ω. - Tube Complement: Preamp: 12AX7 (x3) Power amp: EL34 (x2) - Inputs/Outputs: Guitar input, FX Loop (Send/Return), D.I. Out, Foot switch, 1 x Speaker output (16 Ω), 1 x Speaker output (8 Ω) / 2 x Speaker output (16Ω). - Controls: Master Volume, BRIGHT/GIRTH channel switch, Reverb, Tone Cut, THICK switch, GIRTH channel ? ?Volume, Bass, Middle, Treble, Gain?, BRIGHT channel - ?Bass, Middle, Treble, Gain?, THICK. - Dimensions (W x D x H): 450 x 165 x 215 mm / 17.72 x 6.50 x 8.46 inches. - Weight: 12.2 kg / 26.90 lbs. - Options: VFS2A footswitch. - Accessories: Power cable, High Performance VOX Custom Speaker Cable (16AWG).

Weight30.00 kg24.00 kg14.60 kg3.00 kg3.00 kg12.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 30.00 kg
Weight 24.00 kg
Weight 14.60 kg
Weight 3.00 kg
Weight 3.00 kg
Weight 12.00 kg