BUGERA 333XL INFINIUM GUITAR AMPLIFIER 120W

The 333XL / 333XL-212 is the big brother to the 333 Series, with four key additions:

• Overall active Presence control.

• Comes loaded with EL34 power tubes for a more compressed, tighter midrange.

• Noise Gate on Lead channel. This is an ANALOGUE gate that will never close or shut you off in a clean passage. It is designed to decrease high frequency noise and hiss without changing your tone and it works loads better than a lot of competitors' gates.

• XL switch on Crunch and Lead channels. The XL function will add more "chunk" to your sound. You can add some thunder to the combo version to more closely emulate a 412 cab, thicken the sound of single coil pickups or add sustain to single-note melodic passages.

After that, this design is much like the 333 with three fully independent channels: A totally Clean channel that won't break up; a Crunch channel for a "halfway dirty" rock and blues tone (or crank the gain for a metal rhythm tone); and a Lead channel with the same structure as the Crunch channel, but with access to more gain. Each of these channels has its own volume feeding the overall master volume, giving you total control over the level of each.

Our revolutionary INFINIUM Tube Life Multiplier technology is like having your very own technician inside your amp constantly monitoring and tweaking tube performance for the ultimate in tonal integrity and reliability. This revolutionary circuit not only optimizes the performance of each output tube, it dynamically balances the drive between them to more evenly distribute the load. With INFINIUM, your tubes last up to 20 times longer, saving you substantial money over the lifespan of your amplifier. INFINIUM also compensates for the effects of aging, automatically adjusting current levels to keep your tubes sounding as good as the day they were installed.

If and when a tube does reach the end of its life, the system even tells you which one to replace. All you need do is replace the faulty tube and let INFINIUM take care of the rest for you. This all adds up to more consistent sound quality and longer life for your tubes. Maintenance for tube amps has never been this easy!

• Hand-built 120-Watt amplifier driven by 4 x EL34 tubes (convertible to 6L6)
• Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 tubes for boutique clean and face-melting hi-gain tone
• Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
• Revolutionary INFINIUM Tube Life Multiplier technology: - Extends the life of your amplifier's expensive power tubes up to 20 times. - Provides incredible reliability and consistent tone over the complete lifespan of your tubes - No need for expensive matched tube sets - Allows you to mix and match any combination of compatible tube types and brands - Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
• XL switches on the Lead and Crunch channels for killer low end control
• Adjustable Noise Gate available on Lead channel
• Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
• Classic Presence control for efficient midrange sound shaping
• Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
• Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
• Line output with dedicated Level control
• Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
• High-quality components and exceptionally rugged construction ensure long life

Marshall 1987X-01 50W Guitar Amplifier

Though the 50 Watt 1987X shares the same front and rear panel features as its big brother, the 1959 SLP, it does have its own distinct personality. Sweet warm singing sounds are packed into every nook and cranny of this great tone machine. As is the case with the 1959SLP, the 1987X has fittings and hardware as true to the originals as humanly possible, thus ensuring that authentic Marshall 'Vintage' look.

Highlights
Mix the two channels together by connecting a short, screened patch lead between the second input of Channel 1 and the first input of Channel 2. If you then plug your guitar into the first input of Channel 1, you can mix the different tonal characters of each channel for greater flexibility.

The Series Effects Loop features a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised. The Level Switch allows you match the loop to either stompboxes or rack units.

• Output: 50 Watts
• Pre-amp Tubes: 3 x ECC83
• Power Amp Tubes: 2 x EL34
• EQ: 3-Band
• Presence Control

Marshall 2245-01 30W Guitar Amplifier

When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.

By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.

The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.

Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.

• Product type: Amplifier
• Type: 2-channel
• Output power (1 kHz 4 ohms): 2 x 200 W
• Output power (1 kHz 8 ohms): 2 x 100 W
• Output power (1 kHz 8 ohms, bridged mode): 400 W
• Circuit concept: Class D dynamic
• Frequency response: 20 - 20,000 Hz
• THD:
• Voltage gain: 32 dB / 26 dB / 28 dB
• Input sensitivity: 0.68 V / 1.4 V / 1.2 V
• Protection: Soft-start, short-circuit, DC, overheating, overvoltage
• Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
• Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
• Line input connectors: 2 x XLR, 2 x 6.3 mm jack
• Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
• Cooling System: low-noise fan
• Power supply: switching power supply
• Power Consumption Full Load: 470 W
• Operating voltage: 115 V AC / 230 V AC (switchable)
• Width: 482 mm
• Height: 44 mm
• Depth: 244 mm

Get ready to experience a whole new level of tone creation. THR100H Dual packs true dual-amp functionality into a single 5kg package. Both amps feature five custom-voiced amp types with natural, organic overdrive, Yamahaʼs new ultra-dynamic power amp with selectable output tube simulations and selectable class A or A/B topology, independently assignable boosters, reverbs and IR speaker simulators, as well as selectable single or true dual-discrete inputs for genuine dual-path connectivity.

Marshall 2203-01 100W Guitar Amplifier

The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.

The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.