Content |
Our goal with the 6260 head and 6260-212 combo was to achieve the tone of a high power super lead amp, and provide it with all the virile crunch it takes to detonate the center stage. With 6L6s, this design has a very open and glassy tone; with EL34s, it takes on a more compressed and noticeably midrange character.
Split Personality
Turning the Clean gain up gradually causes the amp to react like a non-master volume amp, and achieves a very natural sounding overdrive-what we call "Texas Clean“. The amp will react sharply to changes in volume or attack from the instrument. The Crunch setting is simply the clean channel with more gain from another 12AX7 to create the Rock 'n' Roll rhythm sound heard on all your classic rock faves.
The Lead channel is all about articulate gain and sustain. Copious amounts of harmonics and compression help your solos stand out and cut thru the band with ease. Separate master volumes allow for easy rhythm-clean/solo-lead switching with total control over the level of each sound.
INFINIUM Tube Life Multiplier Technology
Our revolutionary INFINIUM Tube Life Multiplier technology is like having your very own technician inside your amp constantly monitoring and tweaking tube performance for the ultimate in tonal integrity and reliability. This revolutionary circuit not only optimizes the performance of each output tube, it dynamically balances the drive between them to more evenly distribute the load. With INFINIUM, your tubes last up to 20 times longer, saving you substantial money over the lifespan of your amplifier. INFINIUM also compensates for the effects of aging, automatically adjusting current levels to keep your tubes sounding as good as the day they were installed.
If and when a tube does reach the end of its life, the system even tells you which one to replace. All you need do is replace the faulty tube and let INFINIUM take care of the rest for you. This all adds up to more consistent sound quality and longer life for your tubes. Maintenance for tube amps has never been this easy!
Features- Hand-built 120-Watt amplifier driven by 4 x 6L6 tubes (convertible to EL34)
- 2-channel preamp design (Clean/Crunch, Lead) featuring 5 x 12AX7 tubes for thick and screaming hi-gain
- Integrated high-class reverb with dedicated Reverb control
- Revolutionary INFINIUM Tube Life Multiplier technology: - Extends the life of your amplifier's expensive power tubes up to 20 times. - Provides incredible reliability and consistent tone over the complete lifespan of your tubes - No need for expensive matched tube sets - Allows you to mix and match any combination of compatible tube types and brands - Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
- Vintage Equalizer section with dedicated Bass, Mid and Treble controls
- Classic Master Presence control for efficient midrange sound shaping
- Heavy-duty footswitch for Channel selection and FX Loop function included
- Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
The JVM Series from Marshall is the most comprehensive range of professional, all-valve amplifiers ever offered. The JVM205H head is a 2-Channel 50 Watts tone buster. No other multi-channel, multi-mode amplifier delivers the amazing all-valve tone offered by the JVM at any price. Multiple, all-valve voicings provide an amazing array of tones which are accessible from the front-panel switches, MIDI or via the revolutionary technology of the supplied footswitch. Hailed as a breakthrough in amplification by the world's guitar press, the JVM Series offers a powerstage built on the peerless EL34 designs responsible for the legendary Marshall roar.
Outstanding Tone
Ultimate Flexibility
Seamless, Silent Switching
Ultimate Control and Connectivity
MIDI In and Thru connection means it can easily be integrated in a MIDI switching set-up
Studio-Quality Reverb
Effective Control
Silence is Golden
Technical Info
Output (RMS): 50 Watts
Speakers: No
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 1 x ECC83, 2 x EL34
Footswitch (Supplied): PEDL-00045
Dimensions (Millimeters): 730 x 310 x 215
Weight: 17.5 kg, 38.6 lbs
|
- Extremely small all-tube guitar amplifier head
- NORMAL/TOP BOOST channel select
- THIN/MELLOW tone control
- GAIN and VOLUME controls
- 8Ω/16Ω speaker out select
- Full metal construction
Power:
| 5W | Channels: | 1 | Equalizer: | - | Inputs: | 1 | Outputs: | 2 | Effects: | - | Valves: | Yes | Foot-switch: | - | Controls: | Thin, Mellow, Gain, Volume | FX Loop: | - | Dimensions ( W x H x D ): | -
120mm (d) x 193mm (w) x 105mm (h)
| Weight: | -
2,55kg
|
|
Marshall 1987X-01 50W Guitar Amplifier
Though the 50 Watt 1987X shares the same front and rear panel features as its big brother, the 1959 SLP, it does have its own distinct personality. Sweet warm singing sounds are packed into every nook and cranny of this great tone machine. As is the case with the 1959SLP, the 1987X has fittings and hardware as true to the originals as humanly possible, thus ensuring that authentic Marshall 'Vintage' look.
Highlights
Mix the two channels together by connecting a short, screened patch lead between the second input of Channel 1 and the first input of Channel 2. If you then plug your guitar into the first input of Channel 1, you can mix the different tonal characters of each channel for greater flexibility.
The Series Effects Loop features a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised. The Level Switch allows you match the loop to either stompboxes or rack units.
- Output: 50 Watts
- Pre-amp Tubes: 3 x ECC83
- Power Amp Tubes: 2 x EL34
- EQ: 3-Band
- Presence Control
|
Marshall 2203-01 100W Guitar Amplifier
The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.
The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.
| Weighing in at under 1 kilo, the Micro Terror is arguably the most portable amp head on the market. When paired with its matching PPC108 cabinet, the Micro Terrorʼs Aux Input and Headphone output make it a perfect practice partner, small enough for even the most cluttered sideboard. However, donʼt be fooled by its miniature footprint because size is the only thing that is small about this amp.
With a high tensile steel casing, the Micro Terror is built to the same high standards as the rest of the Terror family and features a single 12AX7/ECC81 preamp valve, coupled to a solid state output section. The depth of sound (and volume) that this little thing pushes out is truly staggering, with Orange growl and bite in abundance. Whatʼs more, the Micro Terror can be used with any 8-16 Ohm speaker cabinet. |
Reviews
There are no reviews yet.