Description | | | | | 6-zone PA mono mixing amplifier, MP3 player & IR remote, zones switchable, 120 W
- Comfortable control of PA speakers via 6-zone technology
- 6 PA zone outputs, independently switchable on the front panel
- Output for low-impedance speakers (4-16 ohms)
- SD card slot and USB port
- Folder navigation and repeat functions (1, All)
- 2 rear microphone inputs (6.3 mm jack, unbal.)
- 1 front microphone input (combination XLR/6.3 mm jack, unbal.) with adjustable priority circuit
- All microphone inputs with separate level controls
- 3 line inputs (stereo RCA) with separate level controls
- 1 line output (stereo RCA)
- Chime, switchable
- Treble and bass control for the output signal
- 7-digit LED level meter
- Master control for the output signal
- The device is cooled by cooling fan
- Controlling by IR remote control
- (19") 48.3 cm rack installation 2 U
| Powersoft X4 innovates and evolves the concept of the amplification platform through the integration of a worldwide compatible three-phase power supply and a fully-featured DSP.
The complete digital audio signal management system based on ARM Cortex A-8 processor and TI C6000 DSP platform heralds new and innovative level of signal processing, providing routing and mixing, multi-stage equalization with raised-cosine, IIR and FIR filters, delay up to 2s in input processing and 100ms for time alignment, gain and polarity adjustment, crossover, peak limiters, TruePower™ limiters, and Active DampingControl™.
The power supply permits worldwide AC acceptance and direct connection to any regional power line configuration: it is suitable for Single Phase, Bi-Phase, or Three Phase operation from 85 VAC up to 440 VAC without the need for manual selection. True Three Phase load balancing is directly achievable by the unit without any complex load assignment in the power distribution system design. |
Content | Acoustic Combo
- Power: 60 W
- Equipped with: 1x 8" Turbosound speakers
- 2 Channels
- Effects section with PAN controller: CH1 and CH2
- Klark Teknik effects processor with 16 effects
- DI Out XLR
- Line Out jack
- FX Send
- Tuner Out
- Headphone output
- AUX In: TRS
- Dimensions (H x W x D): 275 x 327 x 237 mm
- Weight: 6.9 kg
- Channel 1:
- 6.3 mm Jack input
- High / low impedance switch
- “Color" switch
- Controls for gain, bass, middle and treble
- Channel 2:
- Combined XLR / jack with optional 48 V phantom
- Line / Mix switch
- Controls for gain, bass and treble
Further information
Power in Watts |
60 |
Speaker size |
1 x 8“ |
Channels |
2 |
Reverb |
Yes |
Effects Unit |
Yes |
External FX Loop |
Yes |
Microphone Input |
Yes |
Line Input |
Yes |
Battery Operation |
No |
Footswitch Connector |
No |
Incl. Footswitch |
No |
| esigned with an emphasis on analog, VOX’s MV50 combines classic amplifier design with new and innovative production techniques to produce a miniature amplifier with truly monstrous sound. Boasting an incredible 50 watts of power, this one-pound package serves up serious guitar tone that’s reminiscent of your favorite old tube amps. With speaker & line/headphone outputs, the MV50 is perfect for the stage, at home, or in the studio for direct recording.
The MV50 is equipped an all-analog pre-amp circuit that features Nutube, a revolutionary new vacuum tube that produces authentic tube tone at a fraction of the size. By taking advantage of this incredible new technology, VOX’s engineers were able to design a true, miniature tube amplifier. Beyond the inclusion of Nutube, the pre-amp circuit in the MV50 features a staggering number of analog components that effectively reproduce the dynamic character of a traditional tube amp. Paired with this innovative pre-amp circuit is a reliable and efficient Class D power amp that has been specifically designed for the MV50. From warm, natural cleans to dynamic overdrives, this power amp has been engineered to respond to the nuances of your guitar and, of course, your technique.
- Analogue preamplifier with Nutube technology
- Power: 50 W
- Class D amplifier
- Controls for gain EQ and volume
- EQ switch on the back to adapt to speaker box
- Line/Headphone jack with speaker simulation
- Impedance select switch: 4, 8 or 16 Ohm
- ECO mode switch
- 1 Input for guitar
- 1 Speaker output socket
- VU meter as output level indicator
- Robust carrying handle
- Retro design
- Weight: 540 g
- Dimensions (W x D x H): 135 x 75 x 100 mm
- Incl. 19 V power supply
|
Portable PA, 2Χ40 Watt stereo, 2x 4" speakers, 1x XLR mic in, 2x 6,3mm jack input, aux in, headphone input, 1x footswitch connector (optional footswitch Vox VFS5 Footswitch - not included), rhythm machine with 24 styles (8 Beat1, 8 Beat2, 8 Beat3, 8 Beat4 Shuffle, 8 Beat5, Unplug1 Cajon, Unplug2 Conga, Unplug3 Djembe, Oldies, Country1, Country2 Train Bt, Country3 3/4, Rock1, Rock2, Blues1, Blues2, 16 Beat1, 16 Beat2 Shuffle, 16 Beat3, Jazz1, Jazz2 3/4, Latin Jazz, Bossa, Samba), recording and playback functions, built-in mixer, built-in tuner & metronome, powered via included power supply or 6x mono D batteries (approx. 20 hours operating time), dimensions: 398 x 242 x 231mm, weight: 8,4kg |
15W Acoustic Guitar Amplifier with Digital Reverb - 1 x 6.5" speaker - high impedance instrument input - 3-band EQ (bass/middle/treble) - volume & gain controls - headphone mini-jack output - stereo jack input for CD/MP3 player - dim. (HxWxD): 31 x 35 x 19cm / 12.2 x 13.8 x 7.5in - weight: 6.8kg / 14lb |
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
240,00 W |
Output power: |
120 W RMS |
Power connection: |
Fixed power supply cord with safety plug |
Frequency range: |
80 - 16000 Hz |
S/N ratio: |
>75 dB Microphone
>85 dB line |
THD: |
<0,5 % at 1 kHz |
Cooling: |
Cooling fan |
Impedance: |
4-16 ohms; Public address systems 100V; Public address systems 70V |
Control: |
IR remote control |
Audio player: |
USB + SD, |
Zone output: |
6 switchable zones |
Circuitry: |
Class AB |
Controls: |
Power on/off transient; Overvoltage; short-circuit |
Connections: |
Input: Microphone via 2 x 6.3 mm plug (unbal.)
Input: Microphone via 1 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line via 3 x stereo RCA 0,3 V
Output: speaker via screw terminal
Output: rec. via 1 x stereo RCA |
Equalizer: |
Master: 1 x 2-band tone control mono |
Music format: |
MP3 |
Number of files: |
Max. 999 |
Available storage media: |
USB devices/SD cards max. 32GB (FAT 32) |
Housing design: |
(19") 48.3 cm rack installation 2 U |
Dimensions: |
Width: 48,3 cm
Depth: 38,5 cm
Height: 8,9 cm |
Weight: |
9,25 kg |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
|
General |
Output power per channel |
Output power per channel |
5200 W @ 2 Ω |
3000 W @ 4 Ω |
1600 W @ 8 Ω |
Bridge mode |
|
10400 W @ 4 Ω |
6000 W @ 8 Ω |
Max output voltage / current |
Max unclipped output voltage @8 Ω |
|
|
175 Vpeak |
Current |
|
|
130 Apeak |
AC main power |
Power supply |
Universal, regulated switch mode with PFC (Power Factor Correction) |
Nominal power requirement |
|
|
100-240 V ±10%, 50-60 Hz |
Operating voltage |
|
|
90 V – 264 V |
Power consumption |
Idle |
|
|
<100 W |
Max |
|
|
<3000 W |
Operating temperature range |
|
|
0° – 35° C – 32° – 95° F |
Thermal dissipation |
1/8 of max output power @ 8 Ω |
|
115 V: 1127BTU/h |
230 V: 1058BTU/h |
1/4 of max output power @ 8 Ω |
|
115 V: 2124BTU/h |
230 V: 1639BTU/h |
|
Reviews
There are no reviews yet.