Bugera BC-15 Vintage Guitar Tube Amplifier

The Bugera BC-15 Vintage Guitar Tube Amplifier is compact, portable and features a 12AX7 tube for a vintage warmth and tone to compliment its vintage styling. The amplifier features 30 watts peak (15 watts RMS) for just the right amount of power during rehearsals, small gigs and recording sessions. A dedicated CD input lets guitarists jam along to CD and MP3 audio. A dedicated 2-band EQ section contours the frequency and overall tone.

Those instantly recognizable, warm British sounds you've come to expect from VOX are alive and well in the compact, 10-Watt Pathfinder 10 combo - plus a high gain capability that's thoroughly modern!

This 10-Watt, 1 x 6.5" combo's eye-catching looks are also classic VOX and include basket-weave, leather-look vinyl, our distinctive diamond grille cloth and, of course, chicken head knobs! Small but all-important details such as gold beading and white piping have also been faithfully reproduced, perfectly recapturing the legendary look of VOX.

Little Yet Loud!
The Pathfinder 10's powerful yet always tone-filled 10-Watt output, makes this amp perfect for home practice, backstage warm-up and recording. The Clean/Overdrive switch allows you to change instantly between clean and dirty sounds. With a mere press of this switch you can go from a crystal clear clean sound to our uniquely warm distortion; or from a slightly crunchy bluesy tone to a high-gain, modern-rock roar.

Headphone/Lineout jack
Want to practice late at night without disturbing your neighbours? No problem! Just plug your headphones into the Headphone/Line Out jack and away you go - your sleeping neighbours won't hear a thing because using this jack automatically mutes the amp's speaker! This jack also doubles as a specially filtered Line Out which is perfect for recording your amp without having to worry about setting up any pesky microphones. The Pathfinder 10 also features controls for Gain, Treble, Bass and Volume plus a Clean/Overdrive switch.

• Input Jacks. This, believe it or not, is where you plug your guitar into the amp!
• Gain Control. This adjusts the overall preamp gain of the amplifier. This control can produce a wide variety of killer tones - from clean to crunchy to crazy and all points in-between! What you get all depends on how you set this control and also how you have the Clean/Overdrive Switch (3) set. In both Switch modes - Clean & Overdrive - turning the Gain control down (i.e. counter clockwise) will clean up your sound while cranking it up (i.e. turning it clockwise) will dirty things up. The possibilities are endless.
• Clean/Overdrive Switch. As its name suggests, this switch puts the preamp of the Pathfinder 10 in one of two distinctly different modes -Clean (switch "out“) or Overdrive (switch "in“). And, as you'd expect, the Overdrive mode has bags more gain than the Clean mode. So, if you want more gain just press this button in and let rip!
• Treble Control. This adjusts the treble (high) frequencies in your tone. It can take your sound from soft and round, to bright and cutting, and any point in-between.
• Bass Control. This adjusts the bass (low) frequencies in your tone. It can take your sound from warm and light, to dark and heavy and any point in-between.
• Volume Control. This determines the overall volume of the amplifier. Setting this control high while keeping the Gain low works well for clean sounds (HINT: make sure the Clean/Overdrive Switch is "out" if you wanna go clean!), while setting the Master Volume lower, engaging the Overdrive mode and turning up the Gain will give you a fat, distorted sound at a lower, "bedroom friendly" volume.
• Headphone/Line Out Jack. This dual output carries a specially filtered signal for use with either headphones or for direct connection to a soundboard or recording console. The LINE OUT gives you a good sounding signal for recording or live work without having to mic up the amp. Inserting a jack-plug into this jack will mute the internal speaker.
• Power ON/OFF Switch & LED. On/Off switch for mains (AC) power to amplifier. Plus power indicator LED.

• Circuitry: Solid-State
• Output: 10-Watts RMS
• Speakers: Vox Bulldog x 1 (6.5“, 8 ohm)
• Controls: Gain, Treble, Bass, Volume, Clean/Overdrive Switch, Power On/Off
• Input: Input Jack
• Outputs: Headphone/Line Out Jack
• Dimensions: 380mm(w) x 260mm(h) x 170mm(d) / 14.96“(w) x 10.24“(h) x 6.69“(d)
• Weight: 4.8Kg/10lbs

The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.

Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30

Product Description

MG101CFX is a Carbon Fiber outfitted, 100 Watt 1x12 inch guitar combo amplifier with FX!

Features

- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 1x12 in. Speaker combo
- 100 watts

Supercharged to befit the name: The Valvetronix Pro Series. Introducing the new VTX150 Neodymium - the pinnacle of VOX modeling amps.

Main Features

• VTX150 Neodymium features
• Valvetronix Pro Series - the perfect fusion of real tube tone and VOX modeling technology
• Next-generation VOX Valve Reactor circuit features an EL84 Vacuum tube
• 132 Expertly voiced presets
  • 44 Song Presets: spot-on recreations of the sounds used on classic tracks
  • 44 Basic Amp Model Presets: Valvetronix amp modeling at its robust finest
  • 44 Effected Amp Model Presets: created with chorus, flanger and tremolo effects
• 44 Distinct amp models - the most in any Valvetronix amp
  • Accurate amp models encompass the entire VOX lineage from the traditional AC30 to the modern Night Train, plus an impressive list of other hard-to-come-by classics and rare hi-gain boutique models
• 25 In-demand, top-quality effects
  • 11 Pedal-type effects
  • 11 Modulation (chorus, flanger, etc.)/Delay effects with Tap Tempo control
  • 3 Reverb styles
• 8 User Programs for saving your custom settings (expandable to 16 using the VC12SV)
• Manual mode relies on the physical knob settings of the amp section
• Amp offers Gain, Volume, and Master Volume; EQ features Treble, Middle, and Bass
• Unique Power Level control can limit the power amp output wattage, creating distinctive power amp distortion at any listening level
• Built-in automatic guitar tuner
• Power level control allows you to adjust the output wattage of the power amp
• Celestion VOX NeoDog neodymium 12" speaker
  • Powerful neodymium magnets generate volume levels unimaginable from a compact 150W combo amp
• Extension speaker output jack
  • Connect any speaker cabinet (150W / 8Ω) to obtain up to 300W of output power
• Effects Loop for use with an external effects processor
• AUX IN jack lets you connect your CD/MP3 player and enjoy jam sessions
• Headphone output simulates the acoustic and spatial character of a full speaker cabinet
• Optional VC-12SV foot controller (or VFS5) foot switch can control many of the VTX150 Neodymium's functions

• Number of amp models: 44
• Number of effects: 25 + Noise reduction
• Number of programs
  • Preset: 132
  • User: 8 (2 banks x 4 channels) *when using VC-12SV: 16 (4 banks x 4 channels)
• Input/output jacks
• Top panel: INPUT jack, PHONES jack, AUX IN jack
• Rear panel: FOOT SW jack, VOX Bus, Effect loop send/return
• Power amp output:
  • maximum 150 W RMS @ 8 ohms (only the VTX150 Neodymium),
  • *maximum 300 W RMS @ 4 ohms (when using an extension speaker)
• Speaker: Celestion Vox NeoDog neodymium speaker; 12" / 8 Ω (x1)
• Signal processing: A/D conversion: 24-bit  D/A conversion: 24-bit
• Power supply requirements: AC, local voltage
• Power consumption: 83W
• Dimensions (W x D x H): 451 x 261 x 438 mm / 17.76 x 10.28 x 17.24 inches
• Weight: 12.1 kg / 26.68 lbs.
• Included items: Power cable
• Options (sold separately): Foot controller (VOX VC-12SV), Foot switch (VOX VFS5)