| Content |
Like the CCM663SR, this is a dual, two-way ceiling speaker combining two offset tweeters and a twin voice coil bass/midrange driver to allow either for a combined stereo signal from one speaker, or for rear-channel surround sound. This speaker features a 150mm (6in) woven glass fibre cone bass/midrange driver and soft dome tweeters, as well as a two-position stereo/surround switch to instantly change between modes. |
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-3/8” | 11.11 cm
Driver Complement :One 1" pure aluminum dome tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :30 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :4.5 lbs | 2.0 kg
Warranty :5 Years |
Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8128):
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums
|
1 x 6 ½ ¨ Mineral Filed Polymer Cone
2 x ¾ ¨ Soft Dome Tweeter
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 22 x 7
One Speaker with Dual Inputs
|
Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Freq. Response: 30 Hz - 30 kHz,
Impedance: 8 Ohms Rec. Ampl. Power: 10 - 250 watts
Inputs: One pair of gold plated spring loaded posts, Finishes: Paintable White
Outer Dimensions: 29.2 x 29.2 x 14.9cm
Cut Out Dimensions: 26.4 x 26.4 x 14.9cm
| Driver Complement |
|---|
| Tweeter | | Quantity | 1 | | Diameter | 1" (2.54cm) | | Type | Pure Aluminum Dome | | Mid / Woofer | | Quantity | 2 | | Diameter | 4 1/2" (11.43cm) | | Type | High Definition Bass/Midrange Driver | | Bass Radiator | | Quantity | 2 | | Diameter | 5 1/4" (13.34cm) | | Type | Planar Bass Radiator |
| Electrical |
|---|
| Audio Inputs | | Speaker Level | 1 Pair (Heavy Duty Spring Loaded) | | Maximum Sensitivity | | 1 watt @ 1 Meter | 92 dB | | Total Frequency Response | | Overall | 30 Hz - 30 kHz | | Nominal Impedance | | Compatible with | 8 ohm | | Crossover | | A/V Receiver Crossover Setting | Small (60 Hz) | | Power Handling | 10 - 250 watts per channel |
| Installation |
|---|
| Cut Out Dimensions | | Height | 10 3/8" (26.35cm) | | Width | 10 3/8" (26.35cm) | | Mounting Depth | 5 7/8" (14.92cm) | | Grille Dimensions | | Height | 11 1/2" (29.21cm) | | Width | 11 1/2" (29.21cm) | | Outer Flange | | Height | 11 1/2" (29.21cm) | | Width | 11 1/2" (29.21cm) | | Placement | | Orientation | In Ceiling | | Cabinet Type | | Speaker Enclosure | Sealed Medite |
|
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
|
Reviews
There are no reviews yet.