Content |
Slightly smaller than its two bigger cousins, the CWM652 still packs a very powerful punch thanks to top-range technologies. Its 130mm (5in) blue Kevlar® bass/midrange driver is housed in a die-cast chassis, providing extra rigidity for cleaner, faster bass. The speaker also incorporates a 25mm (1in) Nautilus™ tube-loaded aluminium dome tweeter, and a three-position high frequency switch for acoustic fine-tuning. Installation is almost effortless, thanks to our new QuickDogs™ fixing system and plug-and-play connection. |
Hxείο Ηιgh Fidelity ?με υψηλής ποιότητας καμπύλη σχεδίασης για χρήση τόσο σε Commerciall (70/100V) με επιλογή ισχύος 30 W, 15 W, 7.5 W at both 70 V and 100 V -όσο και σε εφαρμογές χαμηλής αντίστασης 4Ω. Δυνατότητα χρήσης σε εξωτερικούς χώρους IP-34 (per IEC 529). Διαθέτει 2 woofers 4" και 19 mm titanium-laminate tweeter. 75 W continuous pink noise (300 W peak), 80 Hz - 20 kHz. Διαθέτει βάση στήριξης. Διαστάσεις: 364 mm wide, 251 mm max depth including wall bracket, 262 mm side depth, 127 mm (5 in) height. Χρώμα Λευκό. Υλικό ΑΒS. Βάρος 3.2kg. |
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black |
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance, mineral filled Polymer cone with rubber surround
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance, metalized soft dome in swivel mount
Electrical
Overall Frequency Response 32Hz - 20kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 20kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 89 dB
Dimensions
Size 12-1/16" H x 8-5/8" W
(30.64cm H x 21.91cm W)
Cut-out Size 10-7/8" H x 7-3/8" W
(27.62cm H x 18.73cm W)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-3/8" (6.03cm)
Overall Depth 2-7/8" (7.30cm)
Shipping/Other
Shipped As pair
Total Shipping Weight 8.00 lbs. (3.63kgs)
Speaker Warranty Lifetime Warranty
|
Dimensions | Metric :5-1/2“W x 4-1/2“D x 12-5/8“H | 14.0 x 11.4x 32.1 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition bass/midrange drivers
Frequency Response :50 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :89dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Packaging :One to a box
Mounting Options :On Shelf; On wall with included flush mounting bracket; Equipped with a single 1/4 20 thread to accommodate an after market articulating wall mount (available separately)
Accessories :Wall bracket
Weight | Metric :7.5 lbs | 3.4 kg
Warranty :5 Years
|
Outer Flange Dimensions | Metric :7-1/2” W x 10-13/16” H | 19.1 x 27.5 cm
Cut Out Dimensions | Metric :6-1/2” W x 9-13/16” H | 16.5 x 24.9 cm
Depth from Flange | Metric :3-5/16” | 8.4 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 6-1/2" cast-basket bass/midrange driver
Frequency Response :28 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
Weight | Metric :6 lbs | 2.7 kg
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Warranty :5 Years
A/V Receiver Crossover Setting :80 Hz
|
Reviews
There are no reviews yet.