B&W M1 WHITE HI-FI LOUDSPEAKER 8 ΟΗΜ

The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.

The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.

The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.

The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.

Driver Complements
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Areated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Enhanced Ring Radiator Dynamic Balance tweeter
Electrical
Overall Frequency Response 36Hz-40kHz
Lower -3dB Limit 50Hz dB
Upper -3dB Limit 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-200 w/channel
Efficiency 88 dB
Crossover Orth Crossover
Crossover
(mid-high array) 2800HZ
Inputs Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 16 3/4" H x 8" W x 14 9/16" D
(42.55cm H x 20.32cm W x 36.99cm D)
Mounting Options speaker stands or shelf mount
Enclosure Type Sealed
Enclosure Type
(subwoofer) PowerPort bass venting
Shipping/Other
Product Weight 29.60 lbs. (13.43kgs)
Shipping unit: each
Total Shipping Weight 32.50 lbs. (14.74kgs)
Speaker Warranty 5 years parts and labor (original purchaser)

ALSO AVAILABLE IN "EBONY" COLOR

Dimensions | Metric :6-1/4” W x 6-1/2” D x 10-7/8” H | 15.9 x 16.5 x 27.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/4" BDSS bass/midrange drivers; One 5-1/4" pressure coupled bass radiator
Frequency Response :42 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Two ¼ 20 insert cover plugs; Tripod base
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket articulating mount (articulating mount not included); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 1000 stand mounting (ProStand 1000 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :6.5 lbs | 2.9 kg
Warranty :5 Years

# Perfect for use with ultra-shallow TVs 40-inch class and larger
# Only 1.5 inches (38mm) deep
# Wall mount bracket included
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter

Dimensions (mounted on wall without bracket) :23-1/4" H x 6" W x 1-1/2" D (59.1cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :23-1/4" H x 6" W x 1-9/16" D (59.1cm x 15.2cm x 40mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 2 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

Woven Kevlar    
Crossover Tuning    
Nautilus Tapering Tube    
Flowport    
Technical features     Nautilus™ tube loaded aluminium dome tweeter

Kevlar® brand fibre cone bass/midrange

Flowport™
Description     2-way vented-box system
Drive units     1x ø25mm (1 in) aluminium dome high-frequency

1x ø165mm (6.5 in) woven Kevlar® cone bass/midrange
Frequency range     -6dB at 45Hz and 50kHz
Frequency response     52Hz - 22kHz ±3dB on reference axis
Dispersion     Within 2dB of reference response
Horizontal:     over 60º arc
Vertical:     over 10º arc
Sensitivity     88dB spl (2.83V, 1m)
Harmonic distortion     2nd and 3rd harmonics (90dB, 1m)

Frequency Response +/- 3dB:    60 Hz - 35 KHz
Sensitivity (1W@1M):    87 dB
Driver Compliment:    1 x 140mm (5 1/2“) RST® mid-bass driver
1 x 25mm (1“) C-CAM® gold dome tweeter
Nominal Impedance:    8 ohms
Maximum SPL (each):    110.8 dBA
Recommended Amplifier Requirements (RMS):    25 - 100W
Bass Alignment:    Front ported - bass reflex. HiVE®II port system
Power Handling (RMS):    100W
Crossover Frequency:    3.0kHz
External Dimensions:
(H x W x D)    250 x 140 x 140 mm
9 13/16 x 5 1/2 x 5 1/2 inch
Weight (Individual):    3.95 kg (8 3/4 lbs)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ