AKG C417PP professional miniature condenser microphone

148.80 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Extremely light, inconspicuous lavalier microphone Excellent audio quality across the full bandwith Affordable professional miniature condenser microphone. Its broadband, flat audio reproduction in an omnidirectional format is ideal for all types of broadcast and theatrical applications. The sound is extremely open and natural, making it ideal for wireless or hardwire multi-mic situations. An attachment clip, […]

 

Read more

  • Extremely light, inconspicuous lavalier microphone
  • Excellent audio quality across the full bandwith

Affordable professional miniature condenser microphone. Its broadband, flat audio reproduction in an omnidirectional format is ideal for all types of broadcast and theatrical applications. The sound is extremely open and natural, making it ideal for wireless or hardwire multi-mic situations. An attachment clip, tiepin, and windscreen are supplied with each C 417.
C 417 PP: For hardwire applications, with standard XLR connector for phantom powering.

Weight 0.07 kg

Reviews

There are no reviews yet.

Be the first to review “AKG C417PP professional miniature condenser microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG C417PP professional miniature condenser microphone removeAUDIX ADX10-p Condenser lapel microphone removeShure WL51B & WL51W Lavalier Condenser Microphone removeSHURE SLX14 wireless system removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeShure MX185 Lavalier Condenser Microphone remove
NameAKG C417PP professional miniature condenser microphone removeAUDIX ADX10-p Condenser lapel microphone removeShure WL51B & WL51W Lavalier Condenser Microphone removeSHURE SLX14 wireless system removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeShure MX185 Lavalier Condenser Microphone remove
Image
SKUC417PPADX10-pWL51B & WL51WSLX14WL93 & WL93TMX185
Rating
Price148.80 incl. GR VAT 213.34 incl. GR VAT 291.00 incl. GR VAT 637.00 incl. GR VAT 198.00 incl. GR VAT 265.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Extremely light, inconspicuous lavalier microphone
  • Excellent audio quality across the full bandwith
Affordable professional miniature condenser microphone. Its broadband, flat audio reproduction in an omnidirectional format is ideal for all types of broadcast and theatrical applications. The sound is extremely open and natural, making it ideal for wireless or hardwire multi-mic situations. An attachment clip, tiepin, and windscreen are supplied with each C 417.
C 417 PP: For hardwire applications, with standard XLR connector for phantom powering.

Miniaturized lavalier condenser microphone for wireless or wired applications.

The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to use.

Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz - 18 kHz. This mic is lightweight, low profile and has a natural sound with exceptional sound response.

Primarily for use with the Audix RAD360 Wireless System, the ADX10 includes a tie-clip and a 3' attached cable  terminating to a mini-XLRf connector.

MODEL VARIATIONS:

ADX10P - For hard wired application. Includes an 8' cable terminating to a mini-XLRf connector tie clip, external windscreen and a phantom power adapter module. 9 - 48 V phantom power required.

Type Pre-polarized Condenser
Polar Pattern Cardioid
Frequency Response 50Hz - 18kHz
Impedance 250 Ohms
Sensitivity 5 mV/Pa @1k







    All models include foam windscreen, swiveling lapel clip, dual tie clip, pin mount, magnet mount
    Subminiature size (5.8 mm diameter x 11 mm height)
    Electret condenser cartridge
    Unidirectional pattern
    One termination: 4-pin mini connector (fits directly into Shure wireless transmitters)
    High Boost equalization caps included for optimal clarity and response
        Provides a 10 dB boost centered at 12 kHz

    Used in applications that require a chest-worn microphone

Black and white models available
All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens and carry case
requency response: 20-20,000 Hz
Low visibility with a variety of options for mounting
Low handling noise
Legendary Shure quality, ruggedness, and reliability



 Shure SLX14 Instrument Wireless System Features:

    SLX4 Wireless Receiver:
    Automatic Frequency Selection
    Automatic Transmitter Setup
    960 Selectable frequencies across 24MHz bandwidth
    Detachable 1/4 wave antennas
    Microprocessor-controlled diversity
    RF presence LED
    5-segment audio meter
    Multi-function, backlit LCD
    Low battery indicator
    Frequency and power lockout
    Rugged metal chassis
    Volume control on rear of unit
    1/2 rack design
    Furnished rack hardware
    Non-slip bumpers for use out of rack
    XLR and 1/4" outputs

    SLX1 Bodypack Transmitter
    Automatic Transmitter Setup
    Backlit LCD with timeout feature
    Frequency and power lockout
    3-segment battery fuel gauge
    2 AA batteries (included) provide 8 hours of continuous use
    518 - 782 MHz operating range



Shure SLX14 Instrument Wireless System Specifications:

    SLX4 Wireless Receiver:
    Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): —13dBV; 1/4" connector (into 3000 Ohm load): —2dBV
    Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
    XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
    Sensitivity: —105 dBm for 12 dB SINAD, typical
    Image Rejection: >70 dB, typical
    Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
    Operating Range Under Typical Conditions: 300 ft. (100m)
    Note: Actual range depends on RF signal absorption, reflection, and interference
    Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
    Note: Overall system frequency depends on microphone element.
    Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
    Dynamic Range: >100 dB A-weighted
    Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
    Note: battery characteristics may limit this range
    Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
    Weight: 1 lb. 13 oz. (816 g )
    Housing: Galvanized steel
    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
    respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
    Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC

    SLX1 Bodypack Transmitter
    Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0 dB gain position, +20 dBV maximum at -10 dB gain position
    Gain Adjustment Range: 30dB
    Input Impedance: 1 Mohms
    RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations
    Dimensions (H x W x D): 4.25 x 2.50 x 0.75 in. (108 x 64 x 19 mmD)
    Weight: 81 grams (3 oz.) without batteries
    Housing: Molded ABS case
    Power Requirements: 2 "AA" size alkaline or rechargeable batteries
    Battery Life: >8 hours (alkaline)

Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement Small, inconspicuous mounting hardware Full, clear sound comparable to larger microphones Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation Controlled low-frequency rolloff reduces low-frequency clothing and room noise Low distortion, wide dynamic range Uniform omnidirectional polar pattern Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband Wide-range phantom powering (SM93) accepts all commonly used voltages Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Response Curve Image Small SM93 WL93 View Larger Polar Pattern Omnidirectional, uniform with frequency Output Impedance 3000 ohms Output Level (1 Pascal = 94 dB SPL) Open Circuit Voltage: -38 dBV/Pa (13 mV) Output Clipping Level (at 1,000 Hz) 0.25 V at 120 dB Total Harmonic Distortion Less than 1% at 120 dB Maximum SPL 120 dB Dynamic Range (maximum SPL to A-weighted noise level) 102 dB Output Noise (equivalent SPL) 18 dB typical, A-weighted Signal-to-Noise Ratio 76 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)* *Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector Recommended Operating Voltage 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4) Current Drain 40 microA typical Environmental Conditions Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) Cable Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft]) Case Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille Net Weight Microphone: 16 g (0.57 oz)
Condenser
    Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Microflex® Lavalier microphones bring a new level of sophistication to personal voice reproduction. Like all Microflex family microphones, the Lavaliers use Shure's interchangeable condenser cartridges, available in cardioid, supercardioid or omnidirectional polar patterns. That means you can be sure there is a Microflex Lavalier that's right for your application.  Compatible with all Shure wireless bodypack transmitters, their high sensitivity and wide frequency response guarantee great sound.

MX185     Cardioid, Includes Belt-Clip Preamp, Rotatable Tie Clip, Dual Tie Clip, Snap-Fit Windscreen
Weight0.07 kg0.50 kg0.20 kg2.00 kg0.20 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.07 kg
Weight 0.50 kg
Weight 0.20 kg
Weight 2.00 kg
Weight 0.20 kg
Weight 0.20 kg