| Content |
The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34)
,conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft) | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“)“ | | Weight | 16 kg (35.27 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
The SR-S4SWP is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | | Operating Temperature | -10℃ to +50℃ | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | | Dimensions | 160 (W) × 892 (H) × 303 (D) mm (excluding connected cable) | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
The SR-C15BWP Sub-woofer system is designed to be used in conjunction with the SR-C8LWP or SR-C8SWP Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 450 W | | Rated Impedance | 8 Ω | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | | Speaker Component | 38 cm (15“) cone-type | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“), 4-core cable, 3 m (9.84 ft) | | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | | Weight | 41 kg (90.39 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive? Woofer.
Specifications:
|
Frequency Range
|
:
|
57 Hz - 20 kHz(-10 dB)
| |
Frequency Response
|
:
|
75 Hz - 20 Hz (+/-3db)
| |
Coverage Pattern
|
:
|
100 x 15 nominal
| |
Crossover Modes
|
:
|
4 Ohms Bi-amp / passive,
externally switchable
| |
Crossover Frequency
|
:
|
132 dB SPL peak 1.2 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
| |
System Maximum SPL
|
:
|
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
| |
System Sensitivity (1w @ 1m
|
:
|
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps
| |
HF Driver
|
|
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
| |
Nominal Impedance
|
:
|
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
18 mm, 11-ply birch plywood
| |
Suspension / Mounting
|
:
|
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
| |
Finish
|
:
|
Black DuraFlex? finish
| |
Grille
|
:
|
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
| |
Input Connectors
|
:
|
Neutrik? Speakon? NL-4 (x2)
| |
Dimensions (H x W x D)
|
:
|
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
| |
Net Weight
|
:
|
21.8 kg (48 lb)
| |
Optional Accessories
|
:
|
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
|
|
The SR-S4L is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 94 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | | Dimensions | 160 (W) × 895 (H) × 255 (D) mm | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall mounting bracket: SR-WB4,
Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4,
Protection pad: SR-PP4, Floor stand: SR-FS4,
Digital processor: DP-0206 |
|
The HX-5B-WP is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in directivity. It is ideal for reproducing clear sound in spaces with long reverberation times or high background noises. The HX-5B-WP is designed for outdoor use.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous pink noise: 200 W, Continuous program: 600 W | | Rated Impedance | 8 Ω | | Sensitivity (1 W, 1 m) | 96 dB (60゜ mode), 97 dB (45゜ mode), 98 dB (30゜ mode), 99 dB (15゜ mode) * | | Frequency Response | 95 - 20,000 Hz (-10 dB) (60゜ mode), 100 - 20,000 Hz (-10 dB) (45゜ mode),
105 - 20,000 Hz (-10 dB) (30゜ mode), 110 - 20,000 Hz (-10 dB) (15゜ mode) | | Crossover Frequency | 4 kHz | | Directivity Angle | Horizontal: 100゜ (over 2000 Hz)
Vertical: 60゜ (over 800 Hz), 45゜ (over 1.2 kHz), 30゜ (over 1.6 kHz),
15゜ (over 3.2 kHz) variable | | Speaker Component | Low frequency: 12 cm cone-type × 4, High frequency: Balanced dome-type × 12 | | Speaker Cord | 2-core cabtyre cord with diameter of 6 mm | | Water Protection | IPX4 (Install with the every speaker module downward.) | | Operating Temperature | -15℃ to +50℃ | | Finish | Enclosure: Polypropylene, black
Punched net: Surface-treated steel plate, black, rust proof coating | | Dimensions | 408 (W) × 546 (H) × 342 (D) mm | | Weight | 16 kg | | Accessory | Hanging bracket …2, Hex. wrench …1 | | Option | Matching transformer: MT-200
Speaker mounting bracket: HY-PF1WP, HY-CW1WP, HY-WM1WP, HY-WM2WP,
HY-CN1B-WP | * (Factory-preset: 60゜ mode)
|
Reviews
There are no reviews yet.