TOA SR-C8SWP Line Array Speaker

3,240.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection. Specification Enclosure Bass-reflex type Power Handling Capacity Continuous […]

 

Read more

The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.

Specification
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode)
Rated Impedance 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode)
Sensitivity 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode)
Frequency Response 65 – 20,000 Hz (when driven with the optional DP-0206’s recommended parameters)
Crossover Frequency 1,600 Hz (when driven with the optional DP-0206’s recommended parameters)
Directivity Angle Horizontal: 110゜, Vertical: 15゜
Speaker Component Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2
Connected Cable Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34)
,conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft)
Water Protection IPX4
Finish Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint
Dimensions 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54″ × 11.57“)“
Weight 16 kg (35.27 lb)
Accessory M8 connection bolt …4
Option Rigging frame: SR-RF8WP
Digital processor: DP-0206

 

Weight 16.00 kg

Reviews

There are no reviews yet.

Be the first to review “TOA SR-C8SWP Line Array Speaker”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA SR-C8SWP Line Array Speaker removeJBL VT 4887A LINE ARRAY 2x8'+4x4'+2x1' removeRCF NX L23-A: 750 W, 12", 3x1", ACTIVE LINE ARRAY MODULE removeTOA HX-5W ARRAY SYSTEM removeTOA SR-C8L Line Array Speaker removeTOA SR-C15BWP Line Array Speaker remove
NameTOA SR-C8SWP Line Array Speaker removeJBL VT 4887A LINE ARRAY 2x8'+4x4'+2x1' removeRCF NX L23-A: 750 W, 12", 3x1", ACTIVE LINE ARRAY MODULE removeTOA HX-5W ARRAY SYSTEM removeTOA SR-C8L Line Array Speaker removeTOA SR-C15BWP Line Array Speaker remove
Image
SKUSR-C8SWPVT 4887ANXL23AHX-5WSR-C8LSR-C15BWP
Rating
Price 3,240.00 incl. GR VAT 5,475.00 incl. GR VAT 2,557.50 incl. GR VAT 684.00 incl. GR VAT 2,571.00 incl. GR VAT 3,580.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.

Specification
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode)
Rated Impedance 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode)
Sensitivity 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode)
Frequency Response 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters)
Crossover Frequency 1,600 Hz (when driven with the optional DP-0206's recommended parameters)
Directivity Angle Horizontal: 110゜, Vertical: 15゜
Speaker Component Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2
Connected Cable Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34)
,conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft)
Water Protection IPX4
Finish Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint
Dimensions 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“)“
Weight 16 kg (35.27 lb)
Accessory M8 connection bolt …4
Option Rigging frame: SR-RF8WP
Digital processor: DP-0206

 

Ηχεiο 3 δρόμων, διενiσχυσης, line array μικρού μεγέθους με 2x8" 2168J LF, 1000W/8Ω, 97dB SPL/1W/1Μ, 4x4" 2104H MF, 2x1" 2407H ring radiators HF, MF/HF 225W/8Ω, 107dB SPL/1W/1M, 80Hz-18kHz ±3dB, 90° horizontal. Έτοιμο να δεχθεi το drive pack (μονάδα ενισχυτών με εσωτερικό processor). (279H x 787W x 406D mm). Βάρος 28 kg.

A very compact, active, two-way line array loudspeaker module that delivers extraordinary power handling, clarity, flexibility and great sound in a compact, easy to handle and affordable package.

The 750 Watt Class-D Digipro amplifier module accurately matches the high quality analogue signal input board with precise, complex filter response that result in the natural, detailed reproduction of the best radiating designs.
The NX L23-A is the ideal choice when line array performance is needed and a fast and easy set up is a must.

Features
750 Watt Digipro digital amplifier
133 dB max spl
100 x 15, Wide dispersion constant directivity angle
12" woofer, high power neodymium 3.5" voice coil
3 x 1" HF driver, titanium dome, neodymium 1.75" voice coil
PFC power factor correction

 

Acoustical Specifications
Frequency Response -3 dB:60 Hz÷ 20 kHz
Max SPL:133 dB 
Horizontal coverage angle:100° 
Vertical coverage angle:Max 15° 
Compression Driver:3 x 1" neo, 1.75" v.c. 
Woofer:12" neo, 3.5" v.c. 
INPUT/OUTPUT SECTION
Input signal:bal / unbal 
Input connectors:Combo xlr-jack 
Output connectors:xlr 
Input sensitivity:-2 dBu / +4 dBu 
PROCESSOR SECTION
Crossover frequencies:1300 Hz 
Protections:Thermal, rms 
Limiter:Soft peak limiter 
Controls:Volume, hf correction cluster size 
AMPLIFIER SPECIFICATIONS
Total power:750 Watts 
High frequencies:250 Watts 
Low frequencies:500 Watts 
Cooling:Convection / foced 
Connections:Powercon in / out 
CABINET
Cabinet Material:Balitc birch 
Hardware:Arry side fittings 
Handles:2 side 
Pole Mount/Cap:Yes 
Colour:Black 
PHYSICAL SPECIFICATIONS
Height:346 / 13.62 mm/inch 
Width:659 / 25.94 mm/inch 
Depth:415 / 16.33 mm/inch 
Net Weight:28.5 / 62.83 Kg/Lbs

 

HX-5W 

Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules
independently allows the directivity angle of the speaker system
to be adjusted. Built-in passive network ensures appropriate sound
quality. Ideal for both permanent and temporary installations,
including both vertical and horizontal positioning. Equipped
with a convenient carrying handle. Can be mounted directly on
a wall or suspended by wire, chain or shackle with no need
to use optional brackets. Optional mounting brackets allow
use in a wide variety of applications, including suspension,
ceiling mounting, wall mounting, and speaker stand mounting.
Mounting procedures are described in the instruction manuals
enclosed with the mounting bracket or stand adapter.

Specifications:
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600WRated 
Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode),
98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode)
75 to 20,000 Hz (45° mode) 80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz),
45° (over 1 .2 kHz), 30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4
High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, white
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,
HY-CW1W,HY-WM1W,HY-WM2W,HY-CN1W, Speaker stand adapter:HY-ST1

The SR-C8L is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.

Specification
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode)
Rated Impedance 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode)
Sensitivity 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode)
Frequency Response 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters)
Crossover Frequency 1,600 Hz (when driven with the optional DP-0206's recommended parameters)
Directivity Angle Horizontal: 110゜, Vertical: 5゜
Speaker Component Low frequency: 20 cm (8“) cone-type
High frequency: Wave front control horn 110゜ (horizontal) × 5゜ (vertical)
+ compression driver × 2
Input Connector M5 screw terminal, distance between barriers: 12.2 mm (0.48“)
and Neutrik NL4MP × 2
Finish Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint
Dimensions 526.6 (W) × 293 (H) × 296 (D) mm (20.73 × 11.54" × 11.65“)
Weight 17 kg (37.48 lb)
Accessory M8 connection bolt …4
Option Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206

 

The SR-C15BWP Sub-woofer system is designed to be used in conjunction with the SR-C8LWP or SR-C8SWP Line Array Speaker. Recommended digital processor is the DP-0206 (optional).

Specification
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 450 W
Rated Impedance 8 Ω
Sensitivity 93 dB (1 W, 1 m)
Frequency Response 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters)
Crossover Frequency 125 Hz (when driven with the optional DP-0206's recommended parameters)
Speaker Component 38 cm (15“) cone-type
Connected Cable Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“), 4-core cable, 3 m (9.84 ft)
Operating Temperature -10℃ to +50℃ (14゜F to 122゜F)
Water Protection IPX4
Finish Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint
Dimensions 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“)
Weight 41 kg (90.39 lb)
Accessory M8 connection bolt …4
Option Rigging frame: SR-RF8WP
Digital processor: DP-0206

 

Weight16.00 kg30.00 kg30.00 kg16.00 kg17.00 kg41.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 16.00 kg
Weight 30.00 kg
Weight 30.00 kg
Weight 16.00 kg
Weight 17.00 kg
Weight 41.00 kg