Content |
The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality
Features Rigid MDF cabinet 70W RMS amplifier 8-inch long-throw woofer Individual controls to tailor volume, crossover frequency and phase adjustment
Sensitivity 180mV for full power output Frequency response 34Hz - 150Hz Rated output power 70W Drive units 1 x 8" (203mm) long throw woofer Crossover 50 - 150Hz continuous/active Max. power consumption 100W Colour Black Dimensions (WxHxD) 300 x 300 x 310mm (11.8 x 11.8 x 12.2“) Weight 7.7kg (17lbs) |
Crossover Tuning
Mushrooms
Description Active closed-box subwoofer system
Drive unit ø250mm (10 in) paper/Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 25/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Bass Extension -6dB at 18Hz (position A)
-6dB at 23Hz (position B)
-6dB at 28Hz (position C)
Amplifier Power output: 500W
Rated power consumption: 98W / 1W standby
Input impedance: 33kΩ
Signal / noise: >90dB
Functions: Input level (line in)
Input level (speaker in)
Low-pass filter frequency (line in only)
Low-pass filter bypass
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker in (Binding post)
12v trigger (3.5mm jack)
Low-pass filter
Active 4th-order, variable cut-off frequency
Dimensions Height: 325mm (12.8 in) not including feet
Width: 325mm (12.8 in)
Depth: 375mm (14.8 in) including grille and controls
Net weight 15.5kg (34.4 lb)
Finishes Matte Black
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby
Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
|
imensions | Metric :14-1/4” W x 14-1/4” D x 14-1/10” H | 36.2 x 36.2 x 35.8 cm
Driver Complement :One high-definition 10" long throw woofer, pressure coupled to two 10” low bass radiators
Frequency Response :13 Hz – 200 Hz
Internal Amplifier Power :1500 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :70 lbs | 31.8 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Dimensions | Metric :12” W x 12” D x 12-1/2” H | 30.5 x 30.5 x 31.8 cm
Driver Complement :One high-definition 8" long throw woofer, pressure coupled to two 8” low bass radiators
Frequency Response :14 Hz – 200 Hz
Internal Amplifier Power :1250 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :42 lbs | 19.0 kg
Warranty :5 Years; 3 Years for Amplifiers |
Description Active balanced-drive closed-box subwoofer system
Drive units 2x Ø300mm (12 in) Rohacell® cone long-throw
Frequency range -6dB at 15Hz and 250Hz
Frequency response ±3dB 17Hz - 145Hz
Power output: 1000W
Rated power consumption: 135W
Standby power Consumption: 100dB
Functions: 5 Presets
Input sensitivity
Gain
Low-pass filter
Graphic equalisation
Room compensation
Auto on/standby
Trigger on/standby
Trigger preset switching
RS-232 automation control
Inputs: Stereo Line In (2x RCA Phono)
Mono (LFE) Line In (RCA Phono)
Mono (LFE) Line In (XLR balanced)
Dimensions Height:490mm (19.3 in) not including feet
Width: 460mm (18.1 in) including grilles
Depth: 410mm (16.2 in) including controls
Net weight 44kg (97 lb)
Cabinet finish Gloss Black
Cherrywood
Rosenut
Grille Black cloth
ALSO AVAILABLE IN Cherrywood, rosenut
|
Reviews
There are no reviews yet.