Content |
Turn your mobile, smartphone, tablet or computer into a wireless hi-fi component. By connecting our new BT100 to any supported Cambridge Audio product, you can now stream music wirelessly from your iPhone, smartphone, iPad, tablet, laptop or any device that supports Bluetooth to your hi-fi or entertainment system.
aptX audio enhancement on board
If your smartphone or tablet supports the aptX audio enhancement CODEC the BT100 can support it as well. AptX, which is featured on a growing number of mobile devices as well as MacBooks and Apple desktop computers, allows audio to be broadcast wirelessly in significantly higher quality than over standard Bluetooth. You'll instantly notice more extensive dynamic range, deeper bass and crystal-clear top end.
aptX explained
Standard Bluetooth codec (SBC) has variable performance and its weaknesses are very apparent to music lovers including a reduction in high end clarity, muddiness or dullness on stringed content. Conversely, the aptX codec has a fixed performance standard to guarantee a consistently excellent quality when music data is transferred wirelessly over Bluetooth. With almost CD-quality reproduction on offer, you'll instantly experience significantly greater dynamics and infinitely more detail from your favourite music.
| Features
Desktop or portable digital-to-analog convertor
Mac or PC plug-and-play, no drivers to install
High-performance headphone amp included
USB and optical inputs
USB-powered, no separate power supply needed
Stream bit-perfect HD audio with low jitter
Based on high-performance AK4396 DAC
Works With
Any computer (Mac or PC)
Headphones
Apple TV or any product with optical outputs
Powered speakers
Any audio system with mini-jack or RCA inputs
DAC type
Dual Mode USB and Optical (SPDIF)
Inputs
USB/Optical (SPDIF)
Outputs
RCA stereo/3.5mm headphone
D/A converter
AKM4396
Optical receiver
CS8416
USB controller
TI1020B
USB device class
Type 1.1 or above
Full-scale output
2.0V RMS
Output impedance
10 ohms
Power source
USB 5V
Power requirements
5V DC, 200mA
USB power filtering
2-stage redundant regulation
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) |
Model A5
Description Wireless Music System
Technical features Apple® AirPlay® technology
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
Flowport™
Remote control
Drive units 2x 25mm (1.0in) Nautilus™ tube aluminium tweeter
2x 100mm (4.0in) Mid and low range
Frequency response 47Hz - 22kHz ±3dB on reference axis
Frequency range -6dB at 40Hz and 24kHz
Amplifier power output 2x 20W (tweeter)
2x 20W (midrange)
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 48W
Standby power consumption |
Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.
Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.
The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
Specifications
- DAC
Burr-Brown/TI PCM5102
- Frequency Response
10Hz-20kHz, +0 -0.2dB
- Total Harmonic Distortion + Noise
0.002%
- Signal-to-noise ratio (A-weighted)
106dB (24-bit)
- Maximum output level
2.15V RMS
- Supported CODECS
SBC, AAC, aptX™
- Power requirements
0.7W maks.
- Dimensions
L 60 x W 30 x H 75mm
- Weight
40g
- EAN/UPC code
5 060133 602194
| Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
- For use with DN-202WT
- Receives audio up to 30m (100 ft) without wires
- Use multiple DN-202WR in a system for more coverage
- XLR and 1/4” audio outputs
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
|
Model A7
Description Wireless Music System
Technical features Apple® AirPlay® technology
Digital Signal Processing (DSP)
High Quality Class-D amplifier
Switch mode power supply
USB streaming from PC / Mac®
Flowport™
Remote control
Drive units 2x 25mm (1.0in) Nautilus™ tube aluminium tweeter
2x 75mm (3.0in) Midrange
1x 150mm (6.0in) Subwoofer
Frequency response 40Hz - 36kHz ±3dB on reference axis
Frequency range -6dB at 36Hz and 42kHz
Amplifier power output 2x 25W (tweeter)
2x 25W (midrange)
1x 50W (subwoofer)
Input voltage 100V - 240V ~ 50/60Hz
Rated power consumption 100 W
Standby power consumption |
Reviews
There are no reviews yet.