Content |
The C165 uses a 6.5” woofer along with a 1” pivoting tweeter. The pivoting tweeter provides ultimate customisation, to improve off-axis performance and control over the speaker crossover. The C165 is optimised for integration across the entire audio band.
Frequency response
50Hz - 20kHz
Impendance
4 Ohms
Drivers
1 x 6.5” (165mm) woofer, 1 x 1” (25mm) tweeter
Dimensions
97 x Ø 240mm (3.8 x Ø 9.4’’) Mounting hole required: Ø 202mm (Ø 8”)
Weight
1.28kg (2.8 lbs)
In the box
1x speaker
|
2 x 2-way high-end recessed speaker
This built-in ceiling loudspeaker with particularly high-quality workmanship follows all the major parameters of Magnat´s Quantum technology. Just like the classic home-audio boxes, the ICQ 262 has also been equipped with bass/mid-range cones made from highly stable and torsion-resistant ceramic-aluminium. This material results in extremely accurate reproduction and reveals even the finest of acoustic details.
This special model possesses two angularly disposed tweeters as well as an additional three-way treble level adjustment and, thanks to the dual voice coil and switch, may be used in mono and stereo mode. Cascading also is possible.
Principle
2 x 2 way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
160 mm woofer
Power Handling (RMS / Max.)
100 / 180 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
2 x 4 Ohm
Frequency Response
34 – 26000 Hz
Crossover Frequencies
4.000 Hz
Recommended Amplifier Output
20 - 200 Watts
Outer Dimensions Ø
220 mm
Cutting Out Ø
193 mm
Mounting depth
98 mm
Weight
1.4 kg
|
Outer flange (grille) diameter | Metric :5-3/8" | 13.55 cm
Cut out diameter | Metric :4-1/2" | 11.5 cm
Depth from flange | Metric :3-3/8" | 8.64 cm
Driver complement :3/4" (20mm) pivoting aluminum dome tweeter axially aligned with a 4-1/2" (11.4 cm) BDSS bass/midrange driver
Frequency response :35 Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :88 dB
Recommended associated amplifier power :10 - 150 WPC
Inputs :One pair of gold plated heavy duty spring loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Weight | Metric :2.6 lb. | 1.16kg
Warranty :5 years
|
The CCM664 features an adjustable, tilt-offset 25mm (1in) soft dome tweeter, and a 150mm (6in) woven glassfibre bass/midrange driver. Quick and easy to install, the speaker also incorporates a three-position EQ switch for a better off-axis response. A cost-effective route to high quality ceiling mount sound. |
2-way recessed ceiling speaker
The IC 82 is the larger of two strong-sounding built-in ceiling loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound.
The two built-in coaxial tweeters make two circuit versions possible – sound directed over a wide area or at specific points. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease.
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
2 x 19 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
100 / 180 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
4 – 8 Ohms
Frequency Response
32 - 35000 Hz
Crossover Frequencies
3500 Hz
Recommended Amplifier Output
20 - 180 Watts
Outer Dimensions Ø
272 mm
Cutting Out Ø
238 mm
Mounting depth
100 mm
|
Outer flange (grille) diameter | Metric :9-3/4" | 24.76 cm
Cut out diameter | Metric :8-3/4" | 22.2 cm
Depth from flange | Metric :3-7/8" | 9.77 cm
Driver complement :1-inch (25mm) pivoting Aluminum dome tweeter axially aligned with a 8" (20 cm) BDSS bass/midrange driver
Frequency response :26Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :90 dB
Recommended associated amplifier power :10 - 225 WPC
Inputs :One pair of gold plated heavy-duty spring-loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Weight | Metric :4.8 lb. | 2.14 kg |
Reviews
There are no reviews yet.