| Content |
Combining discreet installation with top quality Cambridge Audio sound, the C165SS in-ceiling speaker offers the best of both worlds and stereo sound to boot!
STEREO SOUND FROM A SINGLE SPEAKER
By utilizing two high quality tweeters and a powerful bass driver, the C165SS gives a high performance stereo sound from a single speaker. Perfect for bathrooms, lobbies or any area that can't accommodate a stereo pair of speakers, the C165SS lets you hear all of the sound in the smallest of areas.
POWERFUL BASS
Matching the precise, stereo treble response is an equally impressive mid-range and bass response. Using a dedicated 6.5" woofer unit, the C165SS offers the ideal balance of a clear and natural mid-range, underpinned by a solid and surprisingly powerful bass response.
DISCREET, BEZEL-LESS FIT
Despite its hi-fi quality sound, the C165SS in-ceiling speaker doesn't compromise on aesthetics. The bezel-less fittings provide a smooth and seamless installation that can hardly be any more discreet. The speaker grille comes finished in neutral white but can easily be painted to match or contrast with your ceiling.
For a full-range, stereo in-ceiling speaker that's as discreet as they come, the Cambridge Audio C165SS offers a performance that's above and beyond what you'd expect.
| Magnetically Shielded | Are they magnetically shielded? Allows speaker to be placed near a TV without the risk of screen damage | | | Sensitivity (dB) | The higher the figure the easier it is to drive - meaning that a less powerful amp may be used | NA | | Impedance (ohms) | Resistance. A standard figure is 8 ohm. Figure halves when doubling the number of speakers | 4 | | Power Rating (Watts) | Maximum power output long term/short term (RMS) | NA | | Depth | Depth of speaker (mm) | 97 | | Diameter | Diameter of speaker inc surround (mm) | 240 | | Cut out | Cut out required for speaker in wall/ceiling (mm) | 202 | | Ceiling Speaker | Suitable for use in ceiling? | | | Wall Speaker | Suitable for use in wall? | | | Black | Does this speaker come in a black finish? | | | Wood | Does this speaker come in a wood finish? | | | Other Colours | Does the speaker have another coloured finish? | | | Weight | Weight of each speaker in KG | 1.28 | | Outdoor Speaker | Suitable for outdoor use? Please note that speakers will have differing levels of weather protection | | | Freq Response (Hz) | The lower the first figure the deeper the bass should be | 60 - 20,000 |
|
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
|
The JBL Professional Control 227C is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227C incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 227C features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. An 8 ohm driver is utilized on the Control 227C and offers 150 Watts of continuous power handling capability.
The Control 227C is easy to install and features a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.
The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
To ensure long life and reliability, Control 227C passes JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.
Features
- Consistent 120° broadband pattern control forexceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
- Extraordinary clarity for speech and vocals withextended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille (sold separately)
Specifications
- Frequency Range (-10dB): 43Hz - 19kHz
- Frequency Response (-3dB): 75Hz - 17kHz
- Nominal Sensitivity: 90dB measured half-space; 95dBcomputed for competitive comparison
- Nominal Coverage Angle: 120 degrees conical,broadband
- Nominal Impedance: 8 ohms
- Low Frequency: 6.5" Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia.): 12" round baffle x depth fromback of baffle of 5.8“
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 9-5/16“(23.65cm)
Cut-out Diameter 8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3-3/8" (8.57cm)
Overall Depth 3-7/8" (9.84cm)
Shipping/Other
Shipped As each
Product Weight 3.25 lbs. (1.47kgs) each
Total Shipping Weight 5.00 lbs. (2.27kgs)
|
Features:
Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker. Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil. High power handling of 400 Watts with high sensitivity provides high SPL capability. The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws.
Specifications:
Frequency Response 30 Hz - 4.5 kHz, -10dB Maximum Power Handling 600 Watts, long term 1000 Watts, 2 hrs. (pink noise) Impedance 8 Ohms SPL 121dB continuous, 124dB peak, long term Beamwidth Not Applicable Horizontal Beamwidth Not Applicable Vertical Beamwidth Not Applicable Directivity Not Applicable Construction Kevlar Reinforced Cone Magnet Saturated-gap Voice Coil 3" Dimensions (HxWxD) 14.4 x 14.4 x 6.3" (366 x 366 x 160mm) Weight 17 lb (7.7 kg)
|
1 x 6 ½ ¨ Mineral Filed Polymer Cone
2 x ¾ ¨ Soft Dome Tweeter
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 22 x 7
One Speaker with Dual Inputs
|
Reviews
There are no reviews yet.