Content | The DacMagic XS USB DAC/headphone amp is an instant upgrade to any computerʼs sound output. It connects quickly and easily to any USB port and allows you to hear your favourite music and movies with every drop of detail, exactly as the artist intended.
Small but mighty
The DacMagic XSs built-in headphone amp puts out 150mW of serious power, for the bass and volume you need even in the noisiest environments. Now you can enjoy perfect sound from your laptop wherever you are. Watch the video opposite for more information.
More power
The built-in headphone amp increases the punch of your headphones, delivering 10 times more power than most laptop soundcards can manage. Even in the noisiest environments you will hear more of your music and wonʼt have to worry about the buzz of background noise.
The DacMagic XS features a volume control, easily adjusted at the tap of a finger. Whatʼs more, an LED shows current sample rate, so you always know if you\'re getting the right level of detail.
Highly Portable
The high quality brushed aluminium case weighs a mere 100g, so this tiny powerhouse can come anywhere with you.
Features
-
- High quality 24-bit DAC
- Analogue volume control
- LED sample rate indicator
- Micro USB cable included
Connections Micro USB input, 3.5mm analogue output
Digital to analogue converter ESS9023 24-bit DAC
Sample rates supported USB 1.0 mode: 16/24-bit, 44.1kHz, 48kHz, 88.2kHz, 96kHz
USB 2.0 mode: 16/24-bit, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Output voltage 2V RMS
Max. power consumption 150mW
Min. headphone impedance 12 Ohms
Frequency response +/-0.2dB 20Hz – 20kHz
THD (unweighted) | ”It makes a handsome difference to your on-the-go sound.” ’What Hi-Fi?’ 2019 award-winner.
Improve the sound of your smartphone
The Cyrus soundKey uses a top quality DAC (Digital to Analogue Convertor) built into an ultra-low power circuit that lets you hugely improve the sound of your smartphone or tablet without rapidly draining the battery. Using a much better DAC than the one built into most smartphones and tablets means music sounds more dynamic, detailed and true-to-life.
Compatible with Hi-Res music files
A further bonus with the soundKey is that it’s compatible with Hi-Res music files up to 24 bit/96kHz. This means that, as well as MP3 and AAC files, it will also replay your Hi-Res FLAC files. Hi-Res makes the music sound more natural, with subtle detail easier to detect.
Ultra-low power consumption
A key advantage with this DAC over others is the extremely low power consumption. With a battery drain of less than 50 milliamps – under half the maximum recommended by Apple for use with their iOS devices – the soundKey is kind to your phone’s battery. What this means is a much longer phone battery life than when using other mini-DACs. The device itself is also battery-free.
Works with Windows 10, Android 5+ and iOS9+
Compatible with Windows, Android and Apple devices the soundKey is suitable for just about any smartphone. Simply make sure you have the correct USB OTG (On The Go) connection (Apple Camera Kit connection for Apple iOS devices) and you’re good to go.
Compact, robust and light
Crafted using high quality brushed aluminium, the soundKey is both lightweight and strong. Its sleek design combined with its compact dimensions and mere 18g weight make it perfect for music on the move.
Unlock the key to great sound from your smartphone, with the Cyrus soundKey.
Brand Cyrus
Colour Graphite
USB Yes
Weight (KG) 18.1g
Bluetooth No
Dimensions WxDxH (mm) 23 x 8 x 54
High Resolution Audio Yes
Power Consumption- Normal Use Under 50mA
Optical Digital Inputs No
DAC Texas Instruments PCM5102 |
The DacMagic Plus has fantastic new features including wireless device connectivity and stunning audio performance from music of all formats. Thanks to twin DACs it instantly improves audio fidelity from all your favourite digital products allowing you to make your computer, TV, Blu-ray player and other devices a true part of your hi-fi system.
PURE PROCESS The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing their built-in digital to analogue converters. This signal is then carefully analysed and upgraded using our ATF2 upsampling system. Once this process is complete, the DacMagic Plus outputs your music as a much purer analogue signal straight to your amplifier. Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection. Watch the video opposite to find out why our proprietary ATF2 upsampling technology makes such a difference to the sound produced by our DACs.
Features Twin Wolfson WM8740 24-bit DACs used in dual differential configuration New Anagram Technologies ATF2, 24-bit/384kHz audio upsampling/jitter reduction technology Optional digital preamp mode allowing connection directly to power amp or active speakers 24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes Selectable digital filters - linear phase, minimum phase and steep Supports high quality aptX Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Digital to analogue converters Dual Wolfson WM8740 24-bit DACs Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced Frequency response 20Hz to 20kHz (±0.1dB)* THD @ 1Khz 0dBFs |
Transit Pro is a super-high resolution USB/DSD (Direct Stream Digital) converter that takes audio signal from your computer and delivers the highest quality digital (optical)/analog signal to any audio component. The key to Transit Proʼs outstanding audio performance is its 32bit/384kHz digital "engine,” which delivers a super-wide bandwidth frequency response, ultra-wide dynamic range and an extremely low noise floor. There are eight user-selectable sampling rates between 44.1 and 384kHz so you can achieve the exact performance level needed for any given circumstance.
Transit Pro has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. Transit Pro is USB-bus-powered or you can use an optional AC wall adapter (not included). Transit Pro is the answer when you need to deliver a reference-quality digital signal from your computer to an external audio component.
Features - Super-high resolution USB to optical/DSD converter
- Eight user-selectable sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
- Signal-to-noise ratio: 112dB
- Extremely low distortion: THD+N 0.003%
- Digital (optical) and analog outputs
- Direct Stream Digital rates: DSD64, DSD128
- Dual headphone outputs: ¼-inch, 1/8-inch
- Compatible with headphones from 16–600 ohms
- USB-bus-powered or optional AC adapter
Requirements - Minimum System Requirements:
- M-Audio Windows Driver
- Windows 7
- OSx 10.9
| The Audioengine D3 Premium 24-bit DAC (digital-toanalog converter) allows you to bypass your
computer's headphone output and send music
directly through a USB port for noticeably improved
fidelity and a higher output.
Portable USB audio converter for Mac or PC
Stream bit-perfect native 24/96 HD audio
High-performance headphone amp included
Plug-and-play, no drivers or software to install
Connect headphones or any music system
Easily drives low impedance headphones
Computer OS volume control
Asynchronous data transfer with dual master clocks
HD indicator for sample rates above 48K
Metal injection molded (MIM) aluminum case |
ARTSOUND VD-238 VGA Video and RCA Audio Converter TO HDMI
This compact VGA with Audio to HDMI Converter enables you to convert a VGA video signal and separate RCA audio signal to an HDMI output, and in this way connect your VGA/RCA sources to an HDMI display for a full audiovisual experience.
On output, the converter supports resolutions up to Full HD 1080p and computer resolutions up to 1600 x 1200. It converts the input resolution to the closest output resolution.
Key Features
- Convert VGA and L/R RCA signals to an HDMI output
- VGA and L/R RCA inputs
- HDMI output
- Embeds L/R RCA audio into the HDMI output
- Supports output resolutions up to 1080p and 1600 x 1200
- Supports data rates up to 6.75 Gbps
Input |
1 x VGA 1 x L/R RCA |
Output |
1 x HDMI 1.2a |
Input Video Signal |
0.5 - 1.0 V p-p |
Input DDC Signal |
5 V p-p (TTL) |
Supported Input Resolutions |
640 x 480 at 60 / 75 Hz 800 x 600 60 / 75 Hz 1024 x 768 60 / 75 Hz 1280 x 720 60 / 75 Hz 1280 x 768 60 / 75 Hz 1280 x 960 60 / 75 Hz 1280 x 1024 60 / 75 Hz |
Supported Output Resolutions |
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Computer Resolutions: up to 1600 x 1200 (if available on the HDMI display)
*The input resolution is automatically converted to the closest output resolution. |
Frequency |
Up to 165 MHz |
Video Amplifier Bandwidth |
1.65 Gbps |
Power Supply |
5 VDC, 1 A |
Power Consumption |
5 W |
Operating Temperature |
32 to 158°F (0 to 70°C) |
Storage Temperature |
14 to 176°F (-10 to 80°C) |
Operating Humidity |
10 to 85% RH (no condensation) |
Storage Humidity |
5 to 95% RH (no condensation) |
Dimensions |
3.5 x 1 x 2.7" (8.9 x 2.5 x 6.9 cm) |
Weight |
0.24 lb (109 g) |
|
Reviews
There are no reviews yet.