CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single)

109.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling. Sensitivity (SPL)    86dB (2.83 […]

 

Read more

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

 

 

Weight 0.46 kg

Reviews

There are no reviews yet.

Be the first to review “CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single)”

Your email address will not be published. Required fields are marked *

Quick Comparison

CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single) removePOLK AUDIO SC60 20-100 W/ch In-Ceiling speaker -PAIR- removeJBL CONTROL 47LP-PL Ceiling Speaker 75 Watts removeJBL 8128 Ceiling Speaker 8 Inch 6 Watts removeJBL CONTROL 26C Coaxial 2 way ceiling speaker removeJBL CONTROL 24C MICRO Ceiling 2 way speaker remove
NameCAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single) removePOLK AUDIO SC60 20-100 W/ch In-Ceiling speaker -PAIR- removeJBL CONTROL 47LP-PL Ceiling Speaker 75 Watts removeJBL 8128 Ceiling Speaker 8 Inch 6 Watts removeJBL CONTROL 26C Coaxial 2 way ceiling speaker removeJBL CONTROL 24C MICRO Ceiling 2 way speaker remove
Image
SKUMinx C46SC-60CONTROL 47LP-PL8128CONTROL 26CCONTROL 24C MICRO
Rating
Price 109.00 incl. GR VAT229.00 incl. GR VAT 391.55 incl. GR VAT 65.65 incl. GR VAT 214.00 incl. GR VAT 107.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

In stock

In stock

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

 


 

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response     40Hz-20kHz
Lower -3dB Limit     60Hz
Upper -3dB Limit     20kHZ
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     89 dB
Dimensions
Overall Diameter     9-5/16“(23.65cm)
Cut-out Diameter     8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     3-3/8" (8.57cm)
Overall Depth     3-7/8" (9.84cm)
Shipping/Other      
Shipped As     each
Product Weight     3.25 lbs. (1.47kgs) each
Total Shipping Weight     5.00 lbs. (2.27kgs)

Built on the same platform as the Control 47C/T, the Control 47LP is a low-profile model intended for locations with limited above-ceiling clearance (only 5.6 inches deep). The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond.

Features:
Shallow Backcan Version of 47C/T for locations with limited clearance
Same Sonic Signature as Control 47C/T Allows
Mixing & Matching of mode
Proprietary Conical RBI® Technology Provides
Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Elegant design fits any décor

Specifications:
Frequency Range: 68 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1W, 1m
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Coverage:120° conical, consistent broadband
Nominal Impedance: 8 ohms
Component: 6.5 inch (135 mm) woofer, 1" tweeter
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield,
cutout template Grille
Dimensions (Diameter x Depth): 305mm Diameter x 142mm Diameter Depth (12.0 in x 5.6 in)


Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.

Specifications (8128):
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums

The JBL Control 26C is a coaxial 2-way ceiling installation speaker with a 6.5" woofer and .75" titanium-coated tweeter, featuring a high output, extended frequency reproduction, and a 110° coverage angle, designed in support of background or foreground music applications for hotels, casinos, bars, restaurants and theme park pavilions.

The Control 26C is a 16 Ohm speaker, equipped with a loop-thru output connector for parallel expansion and voiding the need for use of a distributed system, which, in conjunction with the speakers' wide coverage and high output, allows for fewer speakers to be installed to achieve a good sound, and lowers installation costs.

Key Features

� Coaxial 2-way 6.5" ceiling mount installation speaker with wide 110° coverage and high 150-Watt power handling
� High output, discreet and extended frequency response appropriate for foreground or background music in casinos, hotels, restaurants and theme parks
� Wide coverage allows for optimum performance with fewer speakers, reduces installation costs
� SonicGuard overload protection allows for higher operating levels, improved overall system reliability
� 16 Ohm impedance, loop-thru connector allows for parallel speaker connection and system expansion without using constant voltage distributed system
� Humidity resistant Woofer Cone and Surround, aluminum woofer voice coil former provides extra cooling for increased long-term power handling
� Ported enclosure for optimized low frequency reproduction
� All necessary installation materials supplied

Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems.

Specifications:

  • 85 Hz to 20 kHz frequency range
  • 30 watts continuous program power (15W pink noise)capacity
  • 86 dB sensitivity (1W/1m)
  • Shallow steel back-can (only 4 in deep)
Weight0.46 kg1.36 kg0.30 kg1.40 kg1.50 kg1.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.46 kg
Weight 1.36 kg
Weight 0.30 kg
Weight 1.40 kg
Weight 1.50 kg
Weight 1.50 kg