Content |
Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.
Sensitivity (SPL) 86dB (2.83 Vrms input)
Frequency response 120Hz – 20kHz
Impedance 8 Ohms compatible
Recommended amplifier power 15-200 Watts
Drivers 1 x 2.25ʼʼ (57mm) BMR driver
Dimensions 98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight 0.46kg (1.01 lbs)
Key Features
Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
IP65 rated for suitability in high humidity and dusty environments
Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
Metal back box integrated into the product
Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole
| Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums | * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Outer Flange Dimensions | Metric :15-1/2” W x 15-1/2” H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8” W x 14-3/8” H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8” | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years
|
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
|
Built on the same platform as the Control 47C/T, the Control 47LP is a low-profile model intended for locations with limited above-ceiling clearance (only 5.6 inches deep). The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Features:
Shallow Backcan Version of 47C/T for locations with limited clearance
Same Sonic Signature as Control 47C/T Allows
Mixing & Matching of mode
Proprietary Conical RBI® Technology Provides
Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Elegant design fits any décor
Specifications:
Frequency Range: 68 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1W, 1m
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Coverage:120° conical, consistent broadband
Nominal Impedance: 8 ohms
Component: 6.5 inch (135 mm) woofer, 1" tweeter
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield,
cutout template Grille
Dimensions (Diameter x Depth): 305mm Diameter x 142mm Diameter Depth (12.0 in x 5.6 in)
|
Reviews
There are no reviews yet.