Content |
Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.
Sensitivity (SPL) 86dB (2.83 Vrms input)
Frequency response 120Hz – 20kHz
Impedance 8 Ohms compatible
Recommended amplifier power 15-200 Watts
Drivers 1 x 2.25ʼʼ (57mm) BMR driver
Dimensions 98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight 0.46kg (1.01 lbs)
Key Features
Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
IP65 rated for suitability in high humidity and dusty environments
Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
Metal back box integrated into the product
Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole
|
1 x 6 ½ ¨ Mineral Filed Polymer Cone
2 x ¾ ¨ Soft Dome Tweeter
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 22 x 7
One Speaker with Dual Inputs
| Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums |
- Bipolar arrays evenly disperse sound effects over a broad area
- Dual 1" pure aluminum dome tweeters produce pristine highs
- High dynamic impact with a pair of 3.5" cast basket drivers and two 3.5" pressure-coupled Low Bass radiators
- Integrated dense wood enclosures provide easy installation and consistent high performance
In-Ceiling Or In-Wall, They’re Incredible
The Definitive Technology Architectural Speaker line delivers high performance sound while remaining practically invisible. Intended for use in custom home theaters of the highest quality, UIW RSS III speakers feature non-resonant medite cabinets, producing the tightest bass, clearest midrange and an ideal combination of direct and ambient sound. The result is uniquely immersive surround performance that completely envelops listeners in an expansive, 360-degree sound stage.
Overall
Accessories
- Included Accessories
- (1) Wall Mounting Template
- (1) Paint Mask
- (1) Paintable Grille
- (1) Self Adhering Foam Gasket
Warranty
- Cabinet Warranty5 years
- Drivers Warranty5 years
Shipping Cartons
- Carton 113.5" (34.29 cm) h x 13.5" (34.29 cm) w x 7.25" (18.42 cm) d - 9 lbs (4.08 kg)
In-Wall Speaker
- Qty Included1
- Availability US
- Driver Complement
- (2) 1" (2.54 cm) d (Round) - Tweeter
- (2) 3.5" (8.89 cm) d (Round) - Mid/Woofer
- (2) 3.5" (8.89 cm) d (Round) - Bass Radiator
- Grille Dimensions11" (27.94 cm) h x 9.44" (23.98 cm) w
In-Wall Mount
- ShapeRectangle
- Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w
In-Ceiling Mount
- ShapeRectangle
- Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w
Inputs
- Audio Inputs
- Speaker Inputs(1) Pair of Heavy Duty, Spring Loaded
Audio Quality
- Total Frequency Response40 Hz → 30,000 Hz
- Nominal Impedance Range8 ohms → 4 ohms
- Max Sensitivity (1 watt @ 1 meter)92 dB
Crossover
- A/V Receiver Crossover SettingsSmall (120 Hz)
External Amplifier
- Recommended Amplifier Power Per Channel10 watts → 300 watts
|
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-1/4” | 10.8 cm
Driver Complement :One 1" pure aluminum dome pivoting tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :28 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years |
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
Reviews
There are no reviews yet.