Content |
The Cameo CLBARL10RGBIR is a super slim washer with RGB colour mixing, a 30° beam angle and comfortable IR remote control. With a total of 252 long-lasting and energy-efficient 10 mm LEDs the ultra bright light bar with a robust metal housing provides effective, rich colour wallpapers in bars, discos and on the stage.
The CLBARL10RGBIR can be operated via 5 DMX modes, as master, slave and standalone or in one block or separately in 3 equal blocks. 12 programs and the built-in microphone for music control ensure functionality, the manual setting is very easily done on a bright LED display using 4 buttons.
With 3-pin XLR-connectors for input and loop-through of the DMX-signal, as well as IEC-sockets for the power supply and output the Cameo CLBARL10RGBIR is equipped for serial connection. Universal mounting brackets offer extensive possibilities for mounting and alignment. The effect rich LED Washer is also available in white (CLBARL10RGBIRWH), IR remote control is included.
- Type: Washer
- Colour Spectrum: RGB
- Number of LEDs: 252
- LED Type: 10 mm
- Dispersion Angle: 30°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin female
- DMX mode: 12-channel, 9-channel 1, 3-channel 1, 3-channel, 2-channel
- DMX Functions: RGB, 12 programs, strobe, colour macro, Sound Control
- Standalone Modes: 12 programs, Macro Colour, Auto Run, Sound Control, Slave Mode
- Controls: Value Up, Value Down, Mode, Enter, IR remote control
- Indicators: LED Display
- Power Supply: 110 V AC - 250 V AC, 50 - 60 Hz
- Power Consumption: 40 W
- Power Connector: IEC power connector male/female
- Housing Material: metal
- Housing Colour: black
- Width: 1018 mm
- Height: 63 mm
- Depth: 87 mm
|
James Thomas EIGHT RGB WASH HORIZONTAL
72 high intensity Luxeon emitters Red, green and blue Luxeon K2 LEDs 16.7 million colour combinations Independent control of each of the 8 LED heads Each lamp bank can pan independently to alter light spread Beam angle 6?° conical as standard, other beam angles available to order Pre-programmed with 2 overlapping sets of internal effects, each with 31 patterns Powerful effects engine produces unique colour strobing capability Provides an alternative projection medium for video manipulation software Includes bolt holes for arraying multiple fixtures Factory reset option DMX 512 digital input/output with multiple resolutions up to 31 channels Control via external source or stand alone master/slave On board diagnostics provides data and power information 16 Amp Cee Form chassis mounted plug fitted as standard Fitted with 16 Amp socket to provide power to connect adjacent fixtures Auto setting power input 100 - 250V AC Low power consumption (200 watts) virtually no heat generated Internal quiet fan cooling system Robust metal construction Mechanical design includes option to hang fixture vertically or horizontally Black powder coating as standard, other colours available to order Dimensions 362mm(W) x 640mm(H) x 177mm(D) Weight 15.6kg |
Coemar Linealed 1-25 WHITE ST
Component Description
power supply 24V DC
number of channels 1
ambience temperature +20/+40?°C
led viewing angle 120?°
widht Flexible 8,5mm.
Stick 12 mm.
thickness 3,5mm.
colours available white
green
orange
red
blue
blue
led per metre Flexible
minimum 30 - maximum 100 led
for different density ask for quotation
Stick
standard lenght 505 mm.
power supply units available Regoled Dmx 3Ch - cod. E001
Switching power supply 100/240V AC 100VA 24V DC - cod. E016
Switching power supply 100/240V AC 200VA 24V DC - cod. E017/1
Switching power supply 100/240V AC 500VA 24V DC - cod. E018
Temperature:3200K
|
James Thomas Pixelline 1044
1044 high intensity red, green and blue LEDs 16.7 million colour combinations Beam angle 20?° conical as standard Pre-programmed with 2 overlapping sets of internal effects, each with 31 patterns Provides an alternative projection medium for video manipulation software DMX 512 digital input/output with multiple resolutions up to 54 channels Control via external source or stand alone master/slave On board diagnostics provides data and power information 16 Amp Cee Form chassis mounted plug fitted as standard Fitted with 16 Amp socket to provide power to connect adjacent fixtures Auto setting power input 100 - 250V AC Combi yoke supplied as standard for ease of hanging or floor standing Low power consumption (150 watts) virtually no heat generated Internal quiet fan cooling system Robust metal construction Black powder coating as standard, other colours available to order Dimensions 1179mm(L) x 84mm(H) x 165mm(D) Weight 12.2kg with combi yoke (11kg without) IP20 rated |
Griven AL-1450 DAISY ON 10?° LED Colour Changer
DAISY-ON is a surface mount IP68 colour changer for exterior use.
Daisy-on is a surface mount IP68 colour changer for exterior and underwater use (fresh water only). The high efficiency and high brightness LEDs utilized offer silent operation, durability and low power consumption. The 3-piece light source used produces, via RGB electronic mixing, an endless palette of attractive pastel or deep colours, which can crossfade slowly or be selected and changed individually. External control is available via DMX512 signal. Various models are available with a choice of assorted beam angle options.
- High brightness RGB power LEDs unit
- Continuously variable light intensity
- 1-100% electronic dimming facility
- No UV / no infrared
- Virtually instant light production (100 ns)
- Strobe facility (12 fps)
- Die-cast aluminium body
- Full 360° orientation capability with adjustable bracket for surface mounting
- Outdoor / underwater use
- IP68 protection rating
Technical Specification
- Power Consumption : 0.15A@230V (with 8 units) 3.6W per unit max
0.33A@110V (with 8 units) 3.6W per unit max
0.15A @ 230V (with 10 units) 3.6W per unit max (indoor use only) - Shipping Weight : 1.50 kg
- Shipping Weight : 3.31 lbs
- DC Voltage : 24 Volts
- Product Weight : 0.50 kg
- Product Weight : 1.10 lbs
- Lamp Life Full : 50000 hours
- Sustainability Rating : Class-III, IP68
- Color : Red, Green, Blue
- Certifications : CE
- Dimmable : Yes
- Operating Temperature (Maximum) : 40 C
- Operating Temperature (Maximum) : 104 F
- Operating Temperature (Minimum) : -20 C
- Operating Temperature (Minimum) : -4 F
- Current Draw : 0.35 Amps
- Package Volume : 0.022 m3
- Package size (L x W x H) : 35 x 28 x 22 cm
- Power supply (outdoor transformer boxes) :
standard 210-240V / 50-60Hz
optional 108-115V / 50-60Hz - Power supply (indoor transformer) :
standard 220-240V / 50-60Hz |
James Thomas EIGHT RGB WASH VERTICAL
72 high intensity Luxeon emitters Red, green and blue Luxeon K2 LEDs 16.7 million colour combinations Independent control of each of the 8 LED heads Each lamp bank can pan independently to alter light spread Beam angle 6?° conical as standard, other beam angles available to order Pre-programmed with 2 overlapping sets of internal effects, each with 31 patterns Powerful effects engine produces unique colour strobing capability Provides an alternative projection medium for video manipulation software Includes bolt holes for arraying multiple fixtures Factory reset option DMX 512 digital input/output with multiple resolutions up to 31 channels Control via external source or stand alone master/slave On board diagnostics provides data and power information 16 Amp Cee Form chassis mounted plug fitted as standard Fitted with 16 Amp socket to provide power to connect adjacent fixtures Auto setting power input 100 - 250V AC Low power consumption (200 watts) virtually no heat generated Internal quiet fan cooling system Robust metal construction Mechanical design includes option to hang fixture vertically or horizontally Black powder coating as standard, other colours available to order Dimensions 362mm(W) x 640mm(H) x 177mm(D) Weight 15.6kg |
Reviews
There are no reviews yet.