CAMEO CLBARL10RGBIR BAR 10 RGB IR – 252 x 10 mm LED RGB Colour Bar black with IR Remote Control

The Cameo CLBARL10RGBIR is a super slim washer with RGB colour mixing, a 30° beam angle and comfortable IR remote control. With a total of 252 long-lasting and energy-efficient 10 mm LEDs the ultra bright light bar with a robust metal housing provides effective, rich colour wallpapers in bars, discos and on the stage.

The CLBARL10RGBIR can be operated via 5 DMX modes, as master, slave and standalone or in one block or separately in 3 equal blocks. 12 programs and the built-in microphone for music control ensure functionality, the manual setting is very easily done on a bright LED display using 4 buttons.

With 3-pin XLR-connectors for input and loop-through of the DMX-signal, as well as IEC-sockets for the power supply and output the Cameo CLBARL10RGBIR is equipped for serial connection. Universal mounting brackets offer extensive possibilities for mounting and alignment. The effect rich LED Washer is also available in white (CLBARL10RGBIRWH), IR remote control is included.

• Type: Washer
• Colour Spectrum: RGB
• Number of LEDs: 252
• LED Type: 10 mm
• Dispersion Angle: 30°
• DMX input: XLR 3-pin male
• DMX output: XLR 3-pin female
• DMX mode: 12-channel, 9-channel 1, 3-channel 1, 3-channel, 2-channel
• DMX Functions: RGB, 12 programs, strobe, colour macro, Sound Control
• Standalone Modes: 12 programs, Macro Colour, Auto Run, Sound Control, Slave Mode
• Controls: Value Up, Value Down, Mode, Enter, IR remote control
• Indicators: LED Display
• Power Supply: 110 V AC - 250 V AC, 50 - 60 Hz
• Power Consumption: 40 W
• Power Connector: IEC power connector male/female
• Housing Material: metal
• Housing Colour: black
• Width: 1018 mm
• Height: 63 mm
• Depth: 87 mm

James Thomas Pixelline Micro E

174 high intensity red, green and blue LEDs
16.7 million colour combinations
Beam angle 20?° conical as standard
New built in effects generator, capable of more than 1000 effects
Up to 29 channels of effects control
Independent DMX start address for the effects generator
Programmable offset for synchronising effects over multiple fixtures
DMX 512 digital input/output with 3 or 9 channel RGB mode
Provides an alternative projection medium for video manipulation software
Factory reset option
Control via external source or stand alone master/slave
PowerCon 20 Amp chassis mounted input and output sockets fitted as standard
Auto setting power input 100 - 250V AC
Yoke supplied as standard for ease of hanging or floor standing
Low power consumption (25 watts) virtually no heat generated
Silent convection cooling system
Robust metal construction
Black powder coating as standard, other colours available to order
Dimensions 205mm (L) x 84mm (H) x 167mm (D) - 155mm (H) with yoke
Weight 2.4kg with yoke (1.9kg without)
IP20 rated

Griven AL-1206 DAWN 45?° LED Colour Changer

Primarily intended for exterior architectural lighting purposes, DAWN is a high output
and high quality IP66 rated colour changer. Fitted with the latest cutting edge technology
using high brightness and high efficiency LEDs, which have a multitude of benefits, including
low power consumption; no moving parts and long light source life, giving virtually maintenance
free operation; light weight and compact size, giving easy handing and installation. DAWN'S
LED light sources are a mixture of red, green and blue to produce, via RGB electronic mixing
an endless palette of attractive pastel or deep colours, which can crossfade slowly or be snap
changed as desired; the LEDs have instant response. The onboard control system gives stand
alone colour sequence control, with master/slave selectable for multiple unit synchronization
or Dawn can be controlled from the dedicated IP65 Controller or any DMX512 controller. A choice
of beam angle options are available to suit most requirements, and the alternative lenses are also
able to be purchased separately and retrofitted if required.

TECHNICAL SPECIFICATIONS

SOURCE
High brightness 1,2W power LED (Light-Emitting Diode) units
Continuously variable light intensity
1-100% electronic dimming facility
No UV
Virtually instant light production (100 ns)
Strobe facility (12 fps)

SOURCE LIFE
The LED light sources used have an exceptionally long life: predicted 100.000 hours
under normal operating conditions.

OPTICS
10???£ beam angle (ordering code AL 1202)
30???£ beam angle (ordering code AL 1204)
45???£ beam angle (ordering code AL 1206)
Optional Frost filter for 10???£ optics version only (ordering code AL 1302)
Optional 10???£ beam set (ordering code AL 1314)
Optional 30???£ beam set (ordering code AL 1315)
Optional 45???£ beam set (ordering code AL 1316)
Optional expansion filter (ordering code AL 1304)

COLOUR VARIETY
RGB additive colour mixing for countless attractive saturated colours
Theoretical variety of 16.700.000 colour hues
Pre-set selectable colour sequences and blends

CONTROL OPERATION
On-board Dip Switch set for digital data assignment and stand alone operation control
Master and Slave
4 channels of DMX 512 standard protocol
Input and output DMX signal connectors
IP65 optional dedicated DMX controller (ordering code AL 1322)

ELECTRICAL SPECIFICATIONS
Power supply: standard 210-250V / 50-60Hz / 0,15 Amp.
optional 100-120V / 50-60Hz / 0,35 Amp. (available on request)
Power Consumption: 36W max at full intensity
(full RGB)
Self-resetting fuse protection
Meets CE safety standards

HOUSING
Die cast aluminium body
Scratch resistant silver-grey paint
Easy mounting system for wall, ceiling and floor with full orientation capability
Fixing yoke included
Outdoor and indoor use
IP66 protection rating

EXTERNAL OPERATING LIMITS
-20?°C to 30?°C (-4?°F to 86?°F) temperature
0-95% relative humidity (non condensing)

WEIGHT
5,5 Kg

DMX CHANNELS
Channel 1 - Red
Channel 2 - Green
Channel 3 - Blue
Channel 4 - Dimmer / Strobe

James Thomas Pixelline 110EC

110 high intensity Luxeon emitters
Red, green, blue and amber Luxeon K2 LEDs
4.29 billion colour combinations
Beam angle 6?° conical as standard, other beam angles available to order
Pre-programmed with 2 overlapping sets of internal effects, each with 31 patterns
Provides an alternative projection medium for video manipulation software
Factory reset option
DMX 512 digital input/output with multiple resolutions up to 20 channels
Control via external source or stand alone master/slave
On board diagnostics provides data and power information
16 Amp Cee Form chassis mounted plug fitted as standard
Fitted with 16 Amp socket to provide power to connect adjacent fixtures
Auto setting power input 100 - 250V AC
Combi yoke supplied as standard for ease of hanging or floor standing
Low power consumption (300 watts) virtually no heat generated
Internal quiet fan cooling system
Robust metal construction
Black powder coating as standard, other colours available to order
Dimensions 1179mm(L) x 84mm(H) x 165mm(D)
Weight 12.2kg with combi yoke (11kg without)
IP20 rated

James Thomas EIGHT RGB WASH HORIZONTAL

72 high intensity Luxeon emitters
Red, green and blue Luxeon K2 LEDs
16.7 million colour combinations
Independent control of each of the 8 LED heads
Each lamp bank can pan independently to alter light spread
Beam angle 6?° conical as standard, other beam angles available to order
Pre-programmed with 2 overlapping sets of internal effects, each with 31 patterns
Powerful effects engine produces unique colour strobing capability
Provides an alternative projection medium for video manipulation software
Includes bolt holes for arraying multiple fixtures
Factory reset option
DMX 512 digital input/output with multiple resolutions up to 31 channels
Control via external source or stand alone master/slave
On board diagnostics provides data and power information
16 Amp Cee Form chassis mounted plug fitted as standard
Fitted with 16 Amp socket to provide power to connect adjacent fixtures
Auto setting power input 100 - 250V AC
Low power consumption (200 watts) virtually no heat generated
Internal quiet fan cooling system
Robust metal construction
Mechanical design includes option to hang fixture vertically or horizontally
Black powder coating as standard, other colours available to order
Dimensions 362mm(W) x 640mm(H) x 177mm(D)
Weight 15.6kg

Coemar Linealed 1-25 WHITE ST

Component Description
power supply 24V DC
number of channels 1
ambience temperature +20/+40?°C
led viewing angle 120?°
widht Flexible 8,5mm.
Stick 12 mm.
thickness 3,5mm.
colours available white
green
orange
red
blue
blue
led per metre Flexible
minimum 30 - maximum 100 led
for different density ask for quotation

Stick
standard lenght 505 mm.
power supply units available Regoled Dmx 3Ch - cod. E001
Switching power supply 100/240V AC 100VA 24V DC - cod. E016
Switching power supply 100/240V AC 200VA 24V DC - cod. E017/1
Switching power supply 100/240V AC 500VA 24V DC - cod. E018

Temperature:3200K