Cameo D FORCE 3000 RGB 3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW) Beam alignment without the need for servicing! Dust-proof aluminium casing for minimum maintenance 30 kpps high-speed galvo scanner @ 8° ILDA Analogue modulation for up to 16 million colour shades Precise beams with extremely low divergence […]
3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
Beam alignment without the need for servicing!
Dust-proof aluminium casing for minimum maintenance
30 kpps high-speed galvo scanner @ 8° ILDA
Analogue modulation for up to 16 million colour shades
Precise beams with extremely low divergence for razor-sharp projections
Interlock Out for sending the emergency switch-off signal
Control via ILDA
Scan Fail safety system
Neutrik powerCON mains input and output
Thermally activated fan for controlled operating temperature
Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Product type
Laser
Total power
3000 mW
Colour spectrum
RGB
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30 kpps @ 8° ILDA
Max. scan angle
50 °
Operating modes
ILDA
Operating voltage
100 V AC – 250 V AC
Power consumption
110 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
246 mm
Height
238 mm
Depth
175 mm
Weight
7,9 kg
Weight
8.00 kg
Reviews
There are no reviews yet.
Be the first to review “Cameo D FORCE 3000 RGB Laser 3Watt” Cancel reply
ARTLIGHT S-2000 1 Watt Animation Laser Light with DMX 512.
Content
Cameo D FORCE 3000 RGB
3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
Beam alignment without the need for servicing!
Dust-proof aluminium casing for minimum maintenance
30 kpps high-speed galvo scanner @ 8° ILDA
Analogue modulation for up to 16 million colour shades
Precise beams with extremely low divergence for razor-sharp projections
Interlock Out for sending the emergency switch-off signal
Control via ILDA
Scan Fail safety system
Neutrik powerCON mains input and output
Thermally activated fan for controlled operating temperature
Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Cameo STORM 3 in 1 lighting effect, 5 x 3W RGBWA Derby, Strobe and Grating Laser
3-in-1 LED Effect
5 x 3 W RGBWA Derby Effect
150 mW Grating Laser (red 100 mW, green 50 mW)
8 x 1 W Strobe LED´s
10 DMX channels, sound and automatic control
Master and slave operation
Low power consumption
Sturdy metal housing
Universal mounting bracket included
The STORM from Cameo Light combines a Derby effect, laser and strobe in one projector. It can be controlled via 10 DMX channels, automatically or by music and used as master or slave. Razor-sharp laser beams in red and green, up to 30 ultra bright strobe lights per second and the RGBWA Derby effect combine to ensure an animated lighting design aimed to impress.
The STORM features an easy to read display with function buttons and LEDs to show operating modes, a key switch to prevent unauthorised operation, remote shutdown and IEC power input and output. The comfortable adjustable bracket and a locking ring allow for reliable assembly of the projector.
Product type
LED Lighting Effects
Type
LED / Laser / Effects
Colour Spectrum Derby Effect
RGBWA
Number of LEDs Derby Effect
5
LED Type Derby Effect
3 W
Dispersion Derby Effect
68 °
Colour Spectrum Laser Effect
green LED (532 nm) , red LED (650 nm)
Number of Diodes Laser Effect
1 x green , 1 x red
Type of Diodes Laser Effect
red 100 mW, green 50 mW (DPSS laser)
Beam Angle Laser Effect
74 °
Laser Class Laser Effect
3R
Laser Shutdown (safety function)
connection for external emergency stop switch , Remote connection
Analogue modulation for up to 16 million colour shades
Precision beam with minimum divergence for razor-sharp projections
Interlock emergency stop signal output
ILDA interface for software control
Scan Fail Safety system
Neutrik PowerCON input and output
Temperature-controlled low-noise fan for cool and quiet operation
Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Product type
Laser
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Colour spectrum
RGB
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30kpps @ 8° ILDA
Max. scan angle
max. 50 °
Operating modes
ILDA
Operating voltage
100 V AC - 250 V AC
Power consumption
150 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
254 mm
Height
175 mm
Depth
300 mm
Weight
7,9 kg
This first of a kind laser uses a 5W blue LED, mixed with red and green laser beams to create mesmerising plasma type effects best viewed on a flat surface, such as a wall or ceiling. The effect rotates and changes constantly, the speed of which can be controlled manually on the unit to suit the mood. This laser, unlike standard lasers, does not require smoke to create the best effects, making it the most unique and desirable product on the market.
* Unique rotating plasma pattern effect (best viewed without smoke)
* Create a thunderstorm effect by manually controlling red and green strobe times and brightness of the blue LED
* 100mW red and 40mW green lasers
* 5W blue LED
* Manually control speed, brightness and strobe
* 3 modes of operation: Manual, Auto and Sound to light
* We recommend that this product is used within the guidelines HSG95
* Key controlled for laser emission safety
1000MW RGB Multi Color DMX Laser Lights 1W Full Color Laser Beam Animation Scan DJ Laser Projector Party Stage Decor lazer Light.
Description
Produces 2 synchronized laser beams
Generates dynamic 3 color laser shows, perfect for fixed and mobile installations.
RGY (Red, Green, Yellow) Class 3B Laser
o 650nm Red 150mW beam
o 532nm Green 150mW beam
o Mixed Yellow 300mW beam
The color of the beams changes all the time using laser blanking technology.
Several working modes:
o DMX controlled, 1 or 9 channels
o Stand-alone with built-in microphone
o Stand-alone automatic mode
Preprogrammed multi-color laser shows
DMX-addressing with LED display
Complies to EN/IEC 60825-1 for Laser Safety
Technical Information
Mains Input: AC 230V, 50Hz
Fuse: 250V 1.5A slow blow (20mm glass)
Sound Control: Internal microphone
DMX connections: 3pin XLR male / female
DMX channels: 1 or 9 channels
DMX starting address: 001 à 255
Laser Power: 150mW Green CW laser (λ = 532nm)
150mW Red CW laser (λ = 650nm)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual
Daslight V3 fixtures
Reviews
There are no reviews yet.