Cameo D FORCE 3000 RGB 3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW) Beam alignment without the need for servicing! Dust-proof aluminium casing for minimum maintenance 30 kpps high-speed galvo scanner @ 8° ILDA Analogue modulation for up to 16 million colour shades Precise beams with extremely low divergence […]
3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
Beam alignment without the need for servicing!
Dust-proof aluminium casing for minimum maintenance
30 kpps high-speed galvo scanner @ 8° ILDA
Analogue modulation for up to 16 million colour shades
Precise beams with extremely low divergence for razor-sharp projections
Interlock Out for sending the emergency switch-off signal
Control via ILDA
Scan Fail safety system
Neutrik powerCON mains input and output
Thermally activated fan for controlled operating temperature
Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Product type
Laser
Total power
3000 mW
Colour spectrum
RGB
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30 kpps @ 8° ILDA
Max. scan angle
50 °
Operating modes
ILDA
Operating voltage
100 V AC – 250 V AC
Power consumption
110 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
246 mm
Height
238 mm
Depth
175 mm
Weight
7,9 kg
Weight
8.00 kg
Reviews
There are no reviews yet.
Be the first to review “Cameo D FORCE 3000 RGB Laser 3Watt” Cancel reply
3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
Beam alignment without the need for servicing!
Dust-proof aluminium casing for minimum maintenance
30 kpps high-speed galvo scanner @ 8° ILDA
Analogue modulation for up to 16 million colour shades
Precise beams with extremely low divergence for razor-sharp projections
Interlock Out for sending the emergency switch-off signal
Control via ILDA
Scan Fail safety system
Neutrik powerCON mains input and output
Thermally activated fan for controlled operating temperature
Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Product type
Laser
Total power
3000 mW
Colour spectrum
RGB
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30 kpps @ 8° ILDA
Max. scan angle
50 °
Operating modes
ILDA
Operating voltage
100 V AC - 250 V AC
Power consumption
110 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
246 mm
Height
238 mm
Depth
175 mm
Weight
7,9 kg
Projecting red, green and blue color mixes with 700 mW output power the LLUKE 700 RGB includes diode and DPSS lasers with 3 mm beam diameters and no more than 2 mrad divergence.
The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.
Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
Item number: CLLLUKE700RGB
Product type: LASER
Total power: 700 mW
Colour spectrum: RGB
Wavelength(s): 650 nm, 532 nm, 447 nm
Beam Data: approx. 3 mm / 2 mrad divergence
Laser sources: Laser diode & DPSS
Laser class: 4
Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
Max. scan angle: 60 degrees
Operating modes: ILDA, DMX-512, Auto, Sound Control
DMX input: 3-Pin XLR
DMX output: 3-Pin XLR
ILDA input: 25-pin Sub-D male
ILDA output: 25-pin Sub-D female
DMX mode: 4-channel, 12-channel
Controls: Mode, Enter, Value Down, Value Up
Display elements: LC display
Power supply: AC 100-240 V / 50-60 Hz
Power consumption: 75 W
Power connector: Neutrik PowerCon
Housing Material: aluminium
Housing colour: black
Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
Cameo STORM 3 in 1 lighting effect, 5 x 3W RGBWA Derby, Strobe and Grating Laser
3-in-1 LED Effect
5 x 3 W RGBWA Derby Effect
150 mW Grating Laser (red 100 mW, green 50 mW)
8 x 1 W Strobe LED´s
10 DMX channels, sound and automatic control
Master and slave operation
Low power consumption
Sturdy metal housing
Universal mounting bracket included
The STORM from Cameo Light combines a Derby effect, laser and strobe in one projector. It can be controlled via 10 DMX channels, automatically or by music and used as master or slave. Razor-sharp laser beams in red and green, up to 30 ultra bright strobe lights per second and the RGBWA Derby effect combine to ensure an animated lighting design aimed to impress.
The STORM features an easy to read display with function buttons and LEDs to show operating modes, a key switch to prevent unauthorised operation, remote shutdown and IEC power input and output. The comfortable adjustable bracket and a locking ring allow for reliable assembly of the projector.
Product type
LED Lighting Effects
Type
LED / Laser / Effects
Colour Spectrum Derby Effect
RGBWA
Number of LEDs Derby Effect
5
LED Type Derby Effect
3 W
Dispersion Derby Effect
68 °
Colour Spectrum Laser Effect
green LED (532 nm) , red LED (650 nm)
Number of Diodes Laser Effect
1 x green , 1 x red
Type of Diodes Laser Effect
red 100 mW, green 50 mW (DPSS laser)
Beam Angle Laser Effect
74 °
Laser Class Laser Effect
3R
Laser Shutdown (safety function)
connection for external emergency stop switch , Remote connection
Fantastic laserburst effect using a 650nm 1000mW red and a 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 100mW Red CW laser (λ = 650nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg
Plug & play: no expensive controllers needed!
a multifunctional infrared remote can be used to control the functions
standalone mode with built-in microphone or automatic shows can be selected
all kinds of strobe effects
adjustable mounting bracket (stand) and power adapter included
key actuated on/off switch for additional safety
complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Details:
Mains Input: AC/DC Adapter 230V AC -> 12V / 600mA
Power consumption: 5,7W
Laser Power: 40mW green CW laser (532nm), 100mW red CW laser (650nm)
Laser radiation class: 3B Laser
Safety Standard: EN60825-1:1994 + A1:2002 + A2:2002 + COTT
Patters: like Micro Star Laser, plus more patter
Operating modes: standalone mode with built-in or automatic
Remote control: inluded
Dimensions: 117 x 92 x 46 mm
Weight: 0,54kg
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual
Daslight V3 fixtures
Reviews
There are no reviews yet.