| Content |
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
- Animation laser with high speed 5 Kpps stepper motor
- 60° scan angle
- Precision beams with minimum divergence
- 32 pattern presets
- DMX, sound and infrared control plus auto function
- Master, slave and standalone modes
- Display with 4 function keys for easy manual operation
- Rugged aluminium enclosure with key switch
- Includes handheld infrared remote
Projecting animations with red, green and blue color mixes the WOOKIE 400 RGB delivers an output of 400 mW from 3 mm beam diameter diode and DPSS lasers with no more than 2 mrad divergence.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Wavelength
447 nm , 532 nm , 650 nm
Beam Data
approx. 3 mm / 2 mrad divergence
Laser sources
DPSS , Laser diode
Scanner
High speed stepper motors, 5 kpps
Operating modes
Auto programs , DMX 512 protocol , sound control
DMX output
XLR 3-pin female
DMX mode
3-channel , 9-channel
Controls
Enter , Mode , Value Down , Value Up
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power connector
IEC power connector male
Weight
2 kg
|
Fantastic laserburst effect using a 532nm 40mW green and 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 40mW Green CW laser (λ = 532nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg |
RGB2w (Red500mw/638nm; Green: 500mw / 520nm; Blue:1000mw/450nm) 25kpps scanner ,LCD,SD,X/Y, RGB dimmer
Laser diode Laser power:2000mW
Color Balance:
Red>500mw/638nm ( 500mW/520nm OEM ( 1000mw/445 OEM ( |
Description - An eye-catching blue laser using high quality 15Kpps scanners instead of ordinary stepper motors:
- Very smooth and soft movements
- 80 Pre-programmed patterns like: numbers, drawings, words, …
- Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ, …
- Class 3B laser based on 400mW 450nm blue laser.
- Several working modes:
- DMX-control: 1channel for easy operation or 17 channels for full control
- Standalone: sound activated (internal mic) or automatic
- IR-remote: infrared remote control.
- Master/slave: wonderful synchronized shows
- Built-in microphone
- 3-digit LED display for easy menu navigation
- Key actuated on/off switch and emergency switch (interlock) input for additional safety
- Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information - Mains Input: AC 100~240V, 50/60Hz
- Fuse: 250V 1A slow blow (20mm glass)
- Total Power consumption: 13W
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 17 channels
- DMX starting address: 001 à 512
- Laser Power: 400mW Blue CW laser (λ = 450nm)
- Laser radiation class: 3B
- Beam diameter @ aperture:
- Divergence (each beam)
- Divergence (total output)
- Scanner speed: 15Kpps
- Working temperature: 10°C to 40°C
- Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
- Size:190 x 170 x 80mm
- Weight: 1.5kg
|
- Type : Multi Light Bar
- Number & Colors Led : 2X Rgb
- Led Power (W) : 9Watt
- Laser : 30Mw 532Nm Green, 100Mw 650Nm Red
- Strobe : 4 X 1 Watt White Leds
- Other : 3W Red, 3W Green & 3W Blue Led for every derby
- Control : Dmx512, Auto, Music, Master/Slave, Ir Remote Control
- Channels Dmx512 : 3, 5, 6, 9 or 27
- Input / Output Dmx512 : 3Pin xlr
- Power Input / Output : IEC
- Power supply (V) : 100/240 V ac, 50/60 Hz
- Consumption (W) : 48
- Dimensions (mm) : 1185 x 386 x 110
- Weight (kg) : 6.6 bar / 8.35 with case
|
Reviews
There are no reviews yet.