Cameo D FORCE 5000 RGB Laser 5Watt

4,400.55 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4049521305443
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: CLLDFORCE5000RGB Category:
Cameo D FORCE 5000 RGB 5,000 mW total output power User-adjustable beam alignment Dust-proof aluminium housing for minimum maintenance High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA Analogue modulation for up to 16 million colour shades Precision beam with minimum divergence for razor-sharp projections Interlock emergency stop signal output ILDA interface for software control […]

 

Read more

Cameo D FORCE 5000 RGB

  • 5,000 mW total output power
  • User-adjustable beam alignment
  • Dust-proof aluminium housing for minimum maintenance
  • High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
  • Analogue modulation for up to 16 million colour shades
  • Precision beam with minimum divergence for razor-sharp projections
  • Interlock emergency stop signal output
  • ILDA interface for software control
  • Scan Fail Safety system
  • Neutrik PowerCON input and output
  • Temperature-controlled low-noise fan for cool and quiet operation
  • Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)

Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB’s pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.

The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.

The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.

Product type
Laser

Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW

Colour spectrum
RGB

Beam Data
2 x 4 mm

Laser sources
Laser diode

Laser Class
4

Scanner
30kpps @ 8° ILDA

Max. scan angle
max. 50 °

Operating modes
ILDA

Operating voltage
100 V AC – 250 V AC

Power consumption
150 W

Power connector
Neutrik PowerCon

Housing material
aluminium

Cabinet colour
Black

Width
254 mm

Height
175 mm

Depth
300 mm

Weight
7,9 kg

Weight 8.00 kg

Reviews

There are no reviews yet.

Be the first to review “Cameo D FORCE 5000 RGB Laser 5Watt”

Your email address will not be published. Required fields are marked *

Quick Comparison

Cameo D FORCE 5000 RGB Laser 5Watt removeJB Systems Space 4 Laser removeJB Systems Radiant Laser removeJB Systems Micro Photon Laser removeJB Systems Twinbeam Color Laser MK III removeCameo STORM 3 in 1 lighting effect, 5 x 3W RGBWA Derby, Strobe and Grating Laser remove
NameCameo D FORCE 5000 RGB Laser 5Watt removeJB Systems Space 4 Laser removeJB Systems Radiant Laser removeJB Systems Micro Photon Laser removeJB Systems Twinbeam Color Laser MK III removeCameo STORM 3 in 1 lighting effect, 5 x 3W RGBWA Derby, Strobe and Grating Laser remove
Image
SKUCLLDFORCE5000RGB19028130799138175151977CLSTORM
Rating
Price 4,400.55 incl. GR VAT116.06 incl. GR VAT385.26 incl. GR VAT149.91 incl. GR VAT315.94 incl. GR VAT 229.40 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Cameo D FORCE 5000 RGB

  • 5,000 mW total output power
  • User-adjustable beam alignment
  • Dust-proof aluminium housing for minimum maintenance
  • High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
  • Analogue modulation for up to 16 million colour shades
  • Precision beam with minimum divergence for razor-sharp projections
  • Interlock emergency stop signal output
  • ILDA interface for software control
  • Scan Fail Safety system
  • Neutrik PowerCON input and output
  • Temperature-controlled low-noise fan for cool and quiet operation
  • Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)

Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.

The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.

The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.

Product type
Laser

Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW

Colour spectrum
RGB

Beam Data
2 x 4 mm

Laser sources
Laser diode

Laser Class
4

Scanner
30kpps @ 8° ILDA

Max. scan angle
max. 50 °

Operating modes
ILDA

Operating voltage
100 V AC - 250 V AC

Power consumption
150 W

Power connector
Neutrik PowerCon

Housing material
aluminium

Cabinet colour
Black

Width
254 mm

Height
175 mm

Depth
300 mm

Weight
7,9 kg

Description

  • A compact but very effective 40mW green class 3B laser.
  • Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ, …
  • Several working modes:
    • DMX-control: 1channel for easy operation or 8 channels for full control.
    • Standalone: sound activated (internal mic) or automatic.
    • IR-remote: infrared remote control.
    • Master/slave: wonderful synchronized shows.
  • Built-in microphone
  • 3-digit LED display for easy menu navigation
  • Key actuated on/off switch and emergency switch (interlock) input for additional safety
  • Complies to EN/IEC 60825-1 2007 for Laser Safety
Technical Information
  • Mains Input:  AC 100~240V, 50/60Hz
  • Fuse:  250V 1A slow blow (20mm glass)
  • Total Power consumption:  12W
  • Sound Control:  Internal microphone
  • DMX connections:  3pin XLR male / female
  • DMX channels:  1 or 8 channels
  • DMX starting address:  001 à 505
  • Laser Power:  40mW Green CW laser (λ = 532nm)                   
  • Laser radiation class:  3B
  • Beam diameter @ aperture: less than 5mm
  • Divergence (each beam): less than 2 mrad
  • Divergence (total output):  less than 90°
  • Working temperature:  10°C to 40°C
  • Laser Safety Standard:  EN/IEC 60825-1 2007
  • Size:  145x160x80mm
  • Weight:  1.3kg

Description

  •     The best of both worlds: a traditional 2 color laser + laser burst effects combined in one unit!
  •     Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ,...
  •     Class 3B laser based on 40mW 532nm green + 200mW 450nm blue laser.
  •     The color of the beams changes all the time using laser blanking technology.
  •     Several working modes:
    • DMX-control: 1channel for easy operation or 10 channels for full control
    • Standalone: sound activated (internal mic) or automatic
    • Master/slave: wonderful synchronized shows
    • Optional CA-8 remote controller available
    • Compatible with RF-DMX Converter:
      * Set the Radiant laser to 1CH DMX-mode
      * Set the RF-DMX Converter to MODE1
  •     Built-in microphone
  •     3-digit LED display for easy menu navigation
  •     Optional CA-8 controller for additional functions available
  •     Key actuated on/off switch and emergency switch (interlock) input for additional safety
  •     Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
  • Mains Input:  AC 100~240V, 50/60Hz
  • Fuse:  250V 1A slow blow (20mm glass)
  • Total Power consumption:  30W
  • Sound Control:  Internal microphone
  • DMX connections:  3pin XLR male / female
  • DMX channels:  1 or 10 channels
  • DMX starting address:  001 à 512
  • Laser Power: 
    • 40mW Green CW laser (λ = 532nm)
    • 200mW Blue CW laser (λ = 450nm)        
  • Laser radiation class:  3B
  • Beam diameter @ aperture: 
  • Divergence (each beam) 
  • Divergence (total output) 
  • Working temperature:  15°C to 40°C
  • Laser Safety Standard:  EN/IEC 60825-1 Ed2, 2007-03
  • Size:  25 x 24 x 19 cm
  • Weight:  2,6kg

Fantastic laserburst effect using a 532nm 40mW green and 450nm 80mW blue laser Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect. Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc. The color of the beams changes all the time using laser blanking technology. Plug & play: no expensive controllers needed! A multifunctional infrared remote can be used to control the functions Standalone mode with built-in microphone or automatic shows can be selected. All kinds of strobe effects Adjustable mounting bracket (stand) and power adapter included. Key actuated on/off switch for additional safety Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA Total Power consumption: 5,7W Sound Control: Internal microphone Laser Power: 40mW Green CW laser (λ = 532nm) + 80mW Blue CW laser (λ = 450nm)          Laser radiation class: 3B Beam diameter @ aperture: less than 5mm Divergence (each beam): less than 2 mrad Divergence (total output): less than 160° Working temperature: 10°C to 40°C Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03 Size: 117 x 92 x 46 mm Weight: 0.35kg

Description

  • Produces 2 synchronized laser beams
  • Generates dynamic 3 color laser shows, perfect for fixed and mobile installations.
  • RGY (Red, Green, Yellow) Class 3B Laser
    • o 650nm Red 150mW beam
    • o 532nm Green 150mW beam
    • o Mixed Yellow 300mW beam
  • The color of the beams changes all the time using laser blanking technology.
  • Several working modes:
    • o DMX controlled, 1 or 9 channels
    • o Stand-alone with built-in microphone
    • o Stand-alone automatic mode
  • Preprogrammed multi-color laser shows
  • DMX-addressing with LED display
  • Complies to EN/IEC 60825-1 for Laser Safety
Technical Information
  • Mains Input:  AC 230V, 50Hz
  • Fuse:  250V 1.5A slow blow (20mm glass)
  • Sound Control:  Internal microphone
  • DMX connections:  3pin XLR male / female
  • DMX channels:  1 or 9 channels
  • DMX starting address:  001 à 255
  • Laser Power:  150mW Green CW laser (λ = 532nm)
                        150mW Red CW laser (λ = 650nm)         
  • Laser radiation class:  3B
  • Laser Safety Standard:  EN60825-1:1994 + A1:2002 + A2:2002
  • Size:  26 x 30x 10cm
  • Weight:  3,61kg

pdfUser's manual
pdfDMX Control Table
pdfEco label
libraryDaslight V3 fixtures

Cameo STORM
3 in 1 lighting effect, 5 x 3W RGBWA Derby, Strobe and Grating Laser

  • 3-in-1 LED Effect
  • 5 x 3 W RGBWA Derby Effect
  • 150 mW Grating Laser (red 100 mW, green 50 mW)
  • 8 x 1 W Strobe LED´s
  • 10 DMX channels, sound and automatic control
  • Master and slave operation
  • Low power consumption
  • Sturdy metal housing
  • Universal mounting bracket included

The STORM from Cameo Light combines a Derby effect, laser and strobe in one projector. It can be controlled via 10 DMX channels, automatically or by music and used as master or slave. Razor-sharp laser beams in red and green, up to 30 ultra bright strobe lights per second and the RGBWA Derby effect combine to ensure an animated lighting design aimed to impress.

The STORM features an easy to read display with function buttons and LEDs to show operating modes, a key switch to prevent unauthorised operation, remote shutdown and IEC power input and output. The comfortable adjustable bracket and a locking ring allow for reliable assembly of the projector.

Product type
LED Lighting Effects

Type
LED / Laser / Effects

Colour Spectrum Derby Effect
RGBWA

Number of LEDs Derby Effect
5

LED Type Derby Effect
3 W

Dispersion Derby Effect
68 °

Colour Spectrum Laser Effect
green LED (532 nm) , red LED (650 nm)

Number of Diodes Laser Effect
1 x green , 1 x red

Type of Diodes Laser Effect
red 100 mW, green 50 mW (DPSS laser)

Beam Angle Laser Effect
74 °

Laser Class Laser Effect
3R

Laser Shutdown (safety function)
connection for external emergency stop switch , Remote connection

Colour Spectrum Strobe
white

Number of LEDs Strobe
8

LED Type Strobe
1 W

Beam Angle Strobe
8 °

DMX input
Optional Remote Switch , XLR 3-pin male

DMX mode
10-channel

DMX output
XLR 3-pin female

DMX Functions
auto programs , Derby , Laser , sound programs , strobe

Standalone modes
auto programs , sound programs

Controls
down , Enter , mode , up

Indicators
4-digit LED display

Power connector
IEC power input and output

Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz

Power consumption
50 W

Fuse
T1.6AL / 250 V

Housing material
metal

Cabinet colour
Black

Housing Cooling
fan

Width
250 mm

Height
250 mm

Depth
170 mm

Weight
4,3 kg

Other features
adjustable mounting bracket included , Optional Remote Switch , security lock slot

Weight8.00 kg1.30 kg2.60 kg0.40 kg3.60 kg4.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 8.00 kg
Weight 1.30 kg
Weight 2.60 kg
Weight 0.40 kg
Weight 3.60 kg
Weight 4.30 kg