Cameo D FORCE 5000 RGB 5,000 mW total output power User-adjustable beam alignment Dust-proof aluminium housing for minimum maintenance High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA Analogue modulation for up to 16 million colour shades Precision beam with minimum divergence for razor-sharp projections Interlock emergency stop signal output ILDA interface for software control […]
Analogue modulation for up to 16 million colour shades
Precision beam with minimum divergence for razor-sharp projections
Interlock emergency stop signal output
ILDA interface for software control
Scan Fail Safety system
Neutrik PowerCON input and output
Temperature-controlled low-noise fan for cool and quiet operation
Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB’s pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Product type
Laser
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Colour spectrum
RGB
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30kpps @ 8° ILDA
Max. scan angle
max. 50 °
Operating modes
ILDA
Operating voltage
100 V AC – 250 V AC
Power consumption
150 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
254 mm
Height
175 mm
Depth
300 mm
Weight
7,9 kg
Weight
8.00 kg
Reviews
There are no reviews yet.
Be the first to review “Cameo D FORCE 5000 RGB Laser 5Watt” Cancel reply
Analogue modulation for up to 16 million colour shades
Precision beam with minimum divergence for razor-sharp projections
Interlock emergency stop signal output
ILDA interface for software control
Scan Fail Safety system
Neutrik PowerCON input and output
Temperature-controlled low-noise fan for cool and quiet operation
Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Product type
Laser
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Colour spectrum
RGB
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30kpps @ 8° ILDA
Max. scan angle
max. 50 °
Operating modes
ILDA
Operating voltage
100 V AC - 250 V AC
Power consumption
150 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
254 mm
Height
175 mm
Depth
300 mm
Weight
7,9 kg
Fantastic laserburst effect using a 650nm 1000mW red and a 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 100mW Red CW laser (λ = 650nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg
With a strong output of 1,000 mW and red, green and blue color mixes the IODA 1000 RGB features diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1.5 mrad only. The red 638 nm diode achieves a significantly better visibility than a conventional 650 nm diode and makes the IODA 1000 RGB the ideal choice for highly professional laser shows.
With analog modulation for up to 16 million colour hues the Ioda Series professional show lasers generate stunning graphics projections with razor-sharp beams. Their dust proof dual layer aluminium enclosures separate the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. All Ioda laser lights sport high speed 30 Kpps scanners 8 degrees ILDA, a 60° scan angle and 128 impressive pattern presets. They provide an ILDA interface on 25-pin D-sub connectors for computer control, DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. They are also capable of master, slave and standalone operation, and the low noise fan keeps the compact units cool and quiet. They feature 3-pin DMX connectors, Neutrik powerCON mains inputs and outputs plus a key switch to prevent unauthorized use. For audience safety Ioda laser lights are equipped with a "Scan Fail Safety" system.
Note: Sharing identical presets, the Ioda lasers are compatible with the Luke series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
Item number:CLLIODA1000RGB
Product type: LASER
Total power: 1000 mW
Colour spectrum: RGB
Wavelength(s): 638 nm, 532 nm, 447 nm
Beam Data: approx. 3 mm / 1.5 mrad divergence
Laser sources: Laser diode & DPSS
Laser class: 4
Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
Max. scan angle: 60 degrees
Operating modes: ILDA, DMX-512, Auto, Sound Control
DMX input: 3-pin XLR
DMX output: 3-pin XLR
ILDA input: 25-pin Sub-D male
ILDA output: 25-pin Sub-D female
DMX mode: 4-channel, 12-channel
Controls: Mode, Enter, Value Down, Value Up
Display elements: LC display
Power supply: AC 100-240 V / 50-60 Hz
Power consumption: 100 W
Power connector: Neutrik PowerCon
Housing Material: aluminium
Housing colour: black
Dimensions (WxDxH): 188 mm x 201 mm x 210 mm (excluding bracket)
Sporting diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1 mrad only the WOOKIE 200 RGY provides red, green and yellow colors and 200 mW output.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Item number: CLLWOOKIE200RGY
Product type: LASER
Total power: 200 mW
Colour spectrum: RGY
Wavelength(s): 650nm, 532nm
Beam Data: approx. 3 mm / 1 mrad divergence
Laser sources: Laser diode
Laser class: 3B
Scanner: High speed stepper motors, 5 kpps
Max. scan angle: 60 degrees
Operating modes: DMX-512, Auto, Sound Control
DMX input: 3-pin XLR
DMX output: 3-pin XLR
DMX mode: 3-channel, 9-channel
Controls: Mode, Enter, Value Down, Value Up
Display elements: LED display
Power supply: AC 100-240 V / 50-60 Hz
Power consumption: 50 W
Power connector: IEC power socket male
Housing Material: metal
Housing colour: black
Dimensions (WxDxH): 180 x 90 x 192 mm (excluding bracket)
Cameo D FORCE 3000 RGB
3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
Beam alignment without the need for servicing!
Dust-proof aluminium casing for minimum maintenance
30 kpps high-speed galvo scanner @ 8° ILDA
Analogue modulation for up to 16 million colour shades
Precise beams with extremely low divergence for razor-sharp projections
Interlock Out for sending the emergency switch-off signal
Control via ILDA
Scan Fail safety system
Neutrik powerCON mains input and output
Thermally activated fan for controlled operating temperature
Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Product type
Laser
Total power
3000 mW
Colour spectrum
RGB
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30 kpps @ 8° ILDA
Max. scan angle
50 °
Operating modes
ILDA
Operating voltage
100 V AC - 250 V AC
Power consumption
110 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
246 mm
Height
238 mm
Depth
175 mm
Weight
7,9 kg
Type : Multi Light Bar
Number & Colors Led : 2X Rgb
Led Power (W) : 9Watt
Laser : 30Mw 532Nm Green, 100Mw 650Nm Red
Strobe : 4 X 1 Watt White Leds
Other : 3W Red, 3W Green & 3W Blue Led for every derby
Control : Dmx512, Auto, Music, Master/Slave, Ir Remote Control
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.