Content |
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Plug & play: no expensive controllers needed!
a multifunctional infrared remote can be used to control the functions
standalone mode with built-in microphone or automatic shows can be selected
all kinds of strobe effects
adjustable mounting bracket (stand) and power adapter included
key actuated on/off switch for additional safety
complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Details:
Mains Input: AC/DC Adapter 230V AC -> 12V / 600mA
Power consumption: 5,7W
Laser Power: 40mW green CW laser (532nm), 100mW red CW laser (650nm)
Laser radiation class: 3B Laser
Safety Standard: EN60825-1:1994 + A1:2002 + A2:2002 + COTT
Patters: like Micro Star Laser, plus more patter
Operating modes: standalone mode with built-in or automatic
Remote control: inluded
Dimensions: 117 x 92 x 46 mm
Weight: 0,54kg
| Sporting diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1.5 mrad only the LLUKE 1000RGB delivers an output 1,000 mW and red, green and blue color mixes. The red 638 nm diode achieves a significantly better visibility than a conventional 650 nm diode and makes the LUKE 1000 RGB the ideal choice for highly professional laser shows..
The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.
Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
- Item number: CLLLUKE1000RGB
- Product type: LASER
- Total power: 1000 mW
- Colour spectrum: RGB
- Wavelength(s): 638 nm, 532 nm, 447 nm
- Beam Data: approx. 3 mm / 1,5 mrad divergence
- Laser sources: Laser diode & DPSS
- Laser class: 4
- Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
- Max. scan angle: 60 degrees
- Operating modes: ILDA, DMX-512, Auto, Sound Control
- DMX input: 3-Pin XLR
- DMX output: 3-Pin XLR
- ILDA input: 25-pin Sub-D male
- ILDA output: 25-pin Sub-D female
- DMX mode: 4-channel, 12-channel
- Controls: Mode, Enter, Value Down, Value Up
- Display elements: LC display
- Power supply: AC 100-240 V / 50-60 Hz
- Power consumption: 100 W
- Power connector: Neutrik PowerCon
- Housing Material: aluminium
- Housing colour: black
- Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
|
Name:Pure diode RGB5000 laser light
Laser power:5000mW
Color Blance:
Red>1000mw/638nm (
Green>1200mW/520nm OEM ( 3000mw/445 OEM ( |
Laser power |
10000mw |
Color Balance |
Green>10000mW/520nm OEM ( |
|
Description - Produces 2 synchronized laser beams
- Generates dynamic 3 color laser shows, perfect for fixed and mobile installations.
- RGY (Red, Green, Yellow) Class 3B Laser
- o 650nm Red 150mW beam
- o 532nm Green 150mW beam
- o Mixed Yellow 300mW beam
- The color of the beams changes all the time using laser blanking technology.
- Several working modes:
- o DMX controlled, 1 or 9 channels
- o Stand-alone with built-in microphone
- o Stand-alone automatic mode
- Preprogrammed multi-color laser shows
- DMX-addressing with LED display
- Complies to EN/IEC 60825-1 for Laser Safety
Technical Information - Mains Input: AC 230V, 50Hz
- Fuse: 250V 1.5A slow blow (20mm glass)
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 9 channels
- DMX starting address: 001 à 255
- Laser Power: 150mW Green CW laser (λ = 532nm)
150mW Red CW laser (λ = 650nm) - Laser radiation class: 3B
- Laser Safety Standard: EN60825-1:1994 + A1:2002 + A2:2002
- Size: 26 x 30x 10cm
- Weight: 3,61kg
|
Reviews
There are no reviews yet.